AI-on-the-edge-device
This is an example of Artificial Intelligence (AI) calculations on a very cheap hardware.
Wiki Page
Details on function, installation and configuration can be found on theA 3d-printable housing can be found here: https://www.thingiverse.com/thing:4573481
respectively ESP32-Cam housing only: https://www.thingiverse.com/thing:4571627
Donate
If you would like to support the developer with a cup of coffee you can do that via Paypal.
If you have any technical topics, you can file a issue in this repository.In other cases you can contact the developer via email:
Change log
Known Issues
- slow response of web server during picture analysis
- spontaneous reboots (mostly due to html access during image processing) - self recovery implemented
General remark: Beside the firmware.bin
, typically also the content of /html
needs to be updated!
6.7.2 Image Processing in Memory - (2021-01-05)
-
NEW 6.7.2: Updated html for setup modus - remove reboot on edit configuration)
-
NEW 6.7.1: Improved stability of camera (back to v6.6.1) - remove black strips and areas
-
Upgrade digital CNN to v8.3.0 (added new type of digits)
-
Internal update: TFlite (v2.5), esp32cam, startup sequence
-
Rollback to espressif v2.1.0, as v3.2.0 shows unstable reboot
-
Bugfix: WLan-passwords, reset of hostname
6.6.1 Image Processing in Memory - (2021-04-05)
- NEW 6.6.1: failed SD card initialization indicated by fast blinking LED at startup
- Improved SD-card handling (increase compatibility with more type of cards)
6.5.0 Image Processing in Memory - (2021-03-25)
- Upgrade digital CNN to v8.2.0 (added new type of digits)
- Supporting alignment structures in ROI definition
- Bug fixing: definition of hostname in
config.ini
6.4.0 Image Processing in Memory - (2021-03-20)
- Additional alignment marks for settings the ROIs (analog and digit)
- Upgrade analog CNN to v7.0.0 (added new type of pointer)
6.3.1 Image Processing in Memory - (2021-03-16)
- NEW: 6.3.1: bug fixing in initial edit reference image and
config.ini
(Spelling error inInitialRotate
) - Initial setup mode: bug fixing, error correction
- Bug-fixing
6.2.2 Image Processing in Memory - (2021-03-10)
-
NEW 6.2.2: bug fixing
-
NEW 6.2.1: Changed brightness and contrast to default if not enabled (resolves to bright images)
-
Determination of fixed illumination settings during startup - speed up of 5s in each run
-
Update digital CNN to v8.1.1 (additional digital images trained)
-
Extended error message in MQTT error message
-
Image brightness is now adjustable
-
Bug fixing: minor topics
6.1.0 Image Processing in Memory - (2021-01-20)
- Disabling of analog / digital counters in configuration
- Improved Alignment Algorithm (
AlignmentAlgo
=Default
,Accurate
,Fast
) - Analog counters:
ExtendedResolution
(last digit is extended by sub comma value of CNN) config.ini
: additional parameterhostname
(additional to wlan.ini)- Switching of GPIO12/13 via http-interface:
/GPIO?GPIO=12&Status=high/low
- Bug fixing: html configuration page, wlan password ("=" now possible)
6.0.0 Image Processing in Memory - (2021-01-02)
-
Major change: image processing fully in memory - no need of SD card buffer anymore
- Need to limit camera resolution to VGA (due to memory limits)
-
MQTT: Last Will Testament (LWT) implemented: "connection lost" in case of connection lost to
TopicError
-
Disabled
CheckDigitIncreaseConsistency
in default configuration - must now be explicit enabled if needed -
Update digital CNN to v7.2.1 (additional digital images trained)
-
Setting of arbitrary time server in
config.ini
-
Option for fixed IP-, DNS-Settings in
wlan.ini
-
Increased stability (internal image and camera handling)
-
Bug fixing: edit digits, handling PreValue, html-bugs
Additional ideas
There are some ideas and feature request, which are not followed currently - mainly due to capacity reasons on side of the developer. They are collected here: FeatureRequest.md
History
5.0.0 Setup Modus - (2020-12-06)
4.1.1 Configuration editor - (2020-12-02)
4.0.0 Tflite Core - (2020-11-15)
3.1.0 MQTT-Client - (2020-10-26)
2.2.1 Version Control - (2020-09-27)
2.1.0 Decimal Shift, Chrome & Edge - (2020-09-25)
2.0.0 Layout update - (2020-09-12)
1.1.3 Initial Version - (2020-09-09)
Full Changelog
Solved topics
- n.a.