/minifb

MiniFB is a small cross platform library to create a frame buffer that you can draw pixels in

Primary LanguageCMIT LicenseMIT

MiniFB

MiniFB (Mini FrameBuffer) is a small cross platform library that makes it easy to render (32-bit) pixels in a window.

An example is the best way to show how it works:

struct mfb_window *window = mfb_open_ex("my display", 800, 600, WF_RESIZABLE);
if (!window)
    return 0;

buffer = (uint32_t *) malloc(800 * 600 * 4);

do {
    int state;

    // TODO: add some fancy rendering to the buffer of size 800 * 600

    state = mfb_update_ex(window, buffer, 800, 600);

    if (state < 0) {
        window = NULL;
        break;
    }
} while(mfb_wait_sync(window));
  1. First the application creates a window calling mfb_open or mfb_open_ex.
  2. Next it's the application responsibility to allocate a buffer to work with.
  3. Next calling mfb_update or mfb_update_ex the buffer will be copied over to the window and displayed. If this function return a value lower than 0 the window will have been destroyed internally and cannot be used anymore.
  4. Last the code waits to synchronize with the monitor calling mfb_wait_sync.

Note that, by default, if ESC key is pressed mfb_update / mfb_update_ex will return -1 (and the window will have been destroyed internally).

See https://github.com/emoon/minifb/blob/master/tests/noise.c for a complete example.

Supported Platforms:

  • Windows
  • MacOS X
  • X11 (FreeBSD, Linux, *nix)
  • Wayland (Linux) [there are some issues]
  • iOS (beta)
  • Android (beta)
  • Web (WASM) (beta)

MiniFB has been tested on Windows, Mac OS X, Linux, iOS, Android and web but may of course have trouble depending on your setup. Currently the code will not do any converting of data if not a proper 32-bit display can be created.

Features:

  • Window creation
  • Callbacks to window events
  • Get information from windows
  • Add per window data
  • Timers and target FPS
  • C and C++ interface

Callbacks to window events:

You can add callbacks to the windows:

void active(struct mfb_window *window, bool isActive) {
    ...
}

void resize(struct mfb_window *window, int width, int height) {
    ...
    // Optionally you can also change the viewport size
    mfb_set_viewport(window, x, y, width, height);
    // or let mfb caclculate the best fit from your original framebuffer size
    mfb_set_viewport_best_fit(window, old_width, old_height);

}

bool close(struct mfb_window *window) {
    ...
    return true;    // true => confirm close
                    // false => don't close
}

void keyboard(struct mfb_window *window, mfb_key key, mfb_key_mod mod, bool isPressed) {
    ...
    // Remember to close the window in some way
    if(key == KB_KEY_ESCAPE) {
        mfb_close(window);
    }
}

void char_input(struct mfb_window *window, unsigned int charCode) {
    ...
}

void mouse_btn(struct mfb_window *window, mfb_mouse_button button, mfb_key_mod mod, bool isPressed) {
    ...
}

// Use wisely this event. It can be sent too often
void mouse_move(struct mfb_window *window, int x, int y) {
    ...
}

// Mouse wheel
void mouse_scroll(struct mfb_window *window, mfb_key_mod mod, float deltaX, float deltaY) {
    ...
}


int main(int argc, char argv[]) {

    struct mfb_window *window = mfb_open_ex("my display", 800, 600, WF_RESIZABLE);
    if (!window)
        return 0;

    mfb_set_active_callback(window, active);
    mfb_set_resize_callback(window, resize);
    mfb_set_close_callback(window, close);
    mfb_set_keyboard_callback(window, keyboard);
    mfb_set_char_input_callback(window, char_input);
    mfb_set_mouse_button_callback(window, mouse_btn);
    mfb_set_mouse_move_callback(window, mouse_move);
    mfb_set_mouse_scroll_callback(window, mouse_scroll);

    ...
}

C++ event interface:

If you are using C++ you can set the callbacks to a class, or use lambda expressions:

struct Events {
    void active(struct mfb_window *window, bool isActive) {
        ...
    }
    ...
}

int main(int argc, char argv[]) {
    Events e;

    // Using object and pointer to member
    mfb_set_active_callback(window, &e, &Events::active);

    // Using std::bind
    mfb_set_active_callback(std::bind(&Events::active, &e, _1, _2), window);

    // Using a lambda
    mfb_set_active_callback([](struct mfb_window *window, bool isActive) {
        ...
    }, window);

    ...
}

Get information from windows (direct interface)

If you don't want to use callbacks, you can get information about the window events directly:

bool                mfb_is_window_active(struct mfb_window *window);

unsigned            mfb_get_window_width(struct mfb_window *window);
unsigned            mfb_get_window_height(struct mfb_window *window);

int                 mfb_get_mouse_x(struct mfb_window *window);             // Last mouse pos X
int                 mfb_get_mouse_y(struct mfb_window *window);             // Last mouse pos Y

float               mfb_get_mouse_scroll_x(struct mfb_window *window);      // Mouse wheel X as a sum. When you call this function it resets.
float               mfb_get_mouse_scroll_y(struct mfb_window *window);      // Mouse wheel Y as a sum. When you call this function it resets.

const uint8_t *     mfb_get_mouse_button_buffer(struct mfb_window *window); // One byte for every button. Press (1), Release 0. (up to 8 buttons)

const uint8_t *     mfb_get_key_buffer(struct mfb_window *window);          // One byte for every key. Press (1), Release 0.

Add per window data

Additionally you can set per window data and recover it:

mfb_set_user_data(window, (void *) myData);
...
myData = (someCast *) mfb_get_user_data(window);

Timers and target FPS

You can create timers for your own purposes.

struct mfb_timer *  mfb_timer_create();
void                mfb_timer_destroy(struct mfb_timer *tmr);

void                mfb_timer_reset(struct mfb_timer *tmr);
double              mfb_timer_now(struct mfb_timer *tmr);
double              mfb_timer_delta(struct mfb_timer *tmr);

double              mfb_timer_get_frequency();
double              mfb_timer_get_resolution();

Furthermore you can set (and get) a target fps for the application. The default is 60 frames per second.

void                mfb_set_target_fps(uint32_t fps);
unsigned            mfb_get_target_fps();

This avoid the problem of update too fast the window collapsing the redrawing in fast processors.

Note: OpenGL and iOS have hardware support for syncing. Other systems will use software syncing. Including MacOS Metal.

In order to be able to use it you need to call the function:

bool                mfb_wait_sync(struct mfb_window *window);

Note that if you have several windows running on the same thread it makes no sense to wait them all...

.

Build instructions

The current build system is CMake.

Initially MiniFB used tundra https://github.com/deplinenoise/tundra as build system and it was required to build the code (but now is not maintained).

In any case, not many changes should be needed if you want to use MiniFB directly in your own code.

MacOS X

Cocoa and clang is assumed to be installed on the system (downloading latest XCode + installing the command line tools should do the trick).

Note that MacOS X Mojave+ does not support Cocoa framework as expected. For that reason you can switch to Metal API. To enable it just compile defining the preprocessor macro USE_METAL_API.

If you use CMake just enable the flag:

mkdir build
cd build
cmake .. -DUSE_METAL_API=ON

or if you don't want to use Metal API:

mkdir build
cd build
cmake .. -DUSE_METAL_API=OFF

Coordinate system

On MacOS, the default mouse coordinate system is (0, 0) -> (left, bottom). But as we want to create a multiplatform library we inverted the coordinates in such a way that now (0, 0) -> (left, top), like in the other platforms.

In any case, if you want to get the default coordinate system you can use the CMake flag: USE_INVERTED_Y_ON_MACOS=ON

mkdir build
cd build
cmake .. -DUSE_INVERTED_Y_ON_MACOS=ON

Note: In the future, we may use a global option so that all platforms behave in the same way. Probably: -DUSE_INVERTED_Y

if you use tundra:

tundra2 macosx-clang-debug

and you should be able to run the noise example (t2-output/macosx-clang-debug-default/noise).

iOS (beta)

It works with and without an UIWindow created. If you want to create the UIWindow through an Story Board, remember to set the UIViewController as iOSViewController and the UIView as iOSView.

Issues:

  • It seems that you have to manually set 'tvOS Deployment Target' to less than 13.
  • It seems that you have to manually set 'Launch Screen File' in project > executable > general to be able to get the real device height.
  • You need to manually set the 'Signing Team' and 'Bundle Identifier'.
  • No multitouch is available yet.
  • As this version uses Metal API it cannot be run in the emulator.

Functions:

Some of the MiniFB functions don't make sense on mobile. The available functions for iOS are:

struct mfb_window * mfb_open(const char *title, unsigned width, unsigned height);
struct mfb_window * mfb_open_ex(const char *title, unsigned width, unsigned height, unsigned flags);    // flags ignored

mfb_update_state    mfb_update(struct mfb_window *window, void *buffer);

void                mfb_close(struct mfb_window *window);

void                mfb_set_user_data(struct mfb_window *window, void *user_data);
void *              mfb_get_user_data(struct mfb_window *window);

bool                mfb_set_viewport(struct mfb_window *window, unsigned offset_x, unsigned offset_y, unsigned width, unsigned height);

bool                mfb_set_viewport_best_fit(struct mfb_window *window, unsigned old_width, unsigned old_height);

void                mfb_set_mouse_button_callback(struct mfb_window *window, mfb_mouse_button_func callback);
void                mfb_set_mouse_move_callback(struct mfb_window *window, mfb_mouse_move_func callback);
void                mfb_set_resize_callback(struct mfb_window *window, mfb_resize_func callback);
void                mfb_set_close_callback(struct mfb_window *window, mfb_close_func callback);

unsigned            mfb_get_window_width(struct mfb_window *window);
unsigned            mfb_get_window_height(struct mfb_window *window);
int                 mfb_get_mouse_x(struct mfb_window *window);             // Last mouse pos X
int                 mfb_get_mouse_y(struct mfb_window *window);             // Last mouse pos Y
const uint8_t *     mfb_get_mouse_button_buffer(struct mfb_window *window); // One byte for every button. Press (1), Release 0. (up to 8 buttons)

void                mfb_get_monitor_scale(struct mfb_window *window, float *scale_x, float *scale_y)
// [Deprecated] Use mfb_get_monitor_scale instead
void                mfb_get_monitor_dpi(struct mfb_window *window, float *dpi_x, float *dpi_y)

Timers are also available.

struct mfb_timer *  mfb_timer_create(void);
void                mfb_timer_destroy(struct mfb_timer *tmr);
void                mfb_timer_reset(struct mfb_timer *tmr);
double              mfb_timer_now(struct mfb_timer *tmr);
double              mfb_timer_delta(struct mfb_timer *tmr);
double              mfb_timer_get_frequency(void);
double              mfb_timer_get_resolution(void);

For now, no multitouch is available.

Example:

- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
    if(g_window == 0x0) {
        g_width  = [UIScreen mainScreen].bounds.size.width;
        g_height = [UIScreen mainScreen].bounds.size.height;
        g_window = mfb_open("noise", g_width, g_height);
        if(g_window != 0x0) {
            g_buffer = malloc(g_width * g_height * 4);
        }
    }

    return YES;
}

- (void)applicationDidBecomeActive:(UIApplication *)application {
    mDisplayLink = [CADisplayLink displayLinkWithTarget:self selector:@selector(OnUpdateFrame)];
    [mDisplayLink addToRunLoop:[NSRunLoop currentRunLoop] forMode:NSDefaultRunLoopMode];
}

- (void)applicationWillTerminate:(UIApplication *)application {
    [mDisplayLink invalidate];
    mfb_close(g_window);
}

- (void) OnUpdateFrame {
    if(g_buffer != 0x0) {
        // Do your wonderful rendering stuff
    }

    mfb_update_state state = mfb_update(g_window, g_buffer);
    if (state != STATE_OK) {
        free(g_buffer);
        g_buffer  = 0x0;
        g_width   = 0;
        g_height  = 0;
    }
}

CMake

mkdir build
cd build
cmake -G Xcode -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_DEPLOYMENT_TARGET=11.0 ..

Android (beta)

Take a look at the example in tests/android. You need Android Studio to build and run it.

Functions:

Some of the MiniFB functions don't make sense on mobile. The available functions for Android are:

struct mfb_window * mfb_open(const char *title, unsigned width, unsigned height);
struct mfb_window * mfb_open_ex(const char *title, unsigned width, unsigned height, unsigned flags);    // flags ignored

mfb_update_state    mfb_update(struct mfb_window *window, void *buffer);

void                mfb_close(struct mfb_window *window);

void                mfb_set_user_data(struct mfb_window *window, void *user_data);
void *              mfb_get_user_data(struct mfb_window *window);

bool                mfb_set_viewport(struct mfb_window *window, unsigned offset_x, unsigned offset_y, unsigned width, unsigned height);

bool                mfb_set_viewport_best_fit(struct mfb_window *window, unsigned old_width, unsigned old_height);

void                mfb_set_active_callback(struct mfb_window *window, mfb_active_func callback);
void                mfb_set_mouse_button_callback(struct mfb_window *window, mfb_mouse_button_func callback);
void                mfb_set_mouse_move_callback(struct mfb_window *window, mfb_mouse_move_func callback);
void                mfb_set_resize_callback(struct mfb_window *window, mfb_resize_func callback);
void                mfb_set_close_callback(struct mfb_window *window, mfb_close_func callback);

bool                mfb_is_window_active(struct mfb_window *window);
unsigned            mfb_get_window_width(struct mfb_window *window);
unsigned            mfb_get_window_height(struct mfb_window *window);
int                 mfb_get_mouse_x(struct mfb_window *window);             // Last mouse pos X
int                 mfb_get_mouse_y(struct mfb_window *window);             // Last mouse pos Y
const uint8_t *     mfb_get_mouse_button_buffer(struct mfb_window *window); // One byte for every button. Press (1), Release 0. (up to 8 buttons)

Timers are also available.

struct mfb_timer *  mfb_timer_create(void);
void                mfb_timer_destroy(struct mfb_timer *tmr);
void                mfb_timer_reset(struct mfb_timer *tmr);
double              mfb_timer_now(struct mfb_timer *tmr);
double              mfb_timer_delta(struct mfb_timer *tmr);
double              mfb_timer_get_frequency(void);
double              mfb_timer_get_resolution(void);

Windows

If you use CMake the Visual Studio project will be generated (2015, 2017 and 2019 have been tested).

Furthermore you can also use MinGW instead of Visual Studio.

if you use tundra:

Visual Studio (ver 2012 express has been tested) tools needed (using the vcvars32.bat (for 32-bit) will set up the enviroment) to build run:

tundra2 win32-msvc-debug

and you should be able to run noise in t2-output/win32-msvc-debug-default/noise.exe

OpenGL API backend

Now, by default, OpenGL backend is used, instead of Windows GDI, because it is faster. To maintain compatibility with old computers an OpenGL 1.5 context is created (no shaders needed).

To enable or disable OpenGL just use a CMake flag:

cmake .. -DUSE_OPENGL_API=ON
# or
cmake .. -DUSE_OPENGL_API=OFF

X11 (FreeBSD, Linux, *nix)

gcc and x11-dev libs needs to be installed.

If you use CMake just disable the flag:

mkdir build
cd build
cmake .. -DUSE_WAYLAND_API=OFF

If you use tundra:

To build the code run:

tundra2 x11-gcc-debug

and you should be able to run t2-output/x11-gcc-debug-default/noise

OpenGL API backend

Now, by default, OpenGL backend is used instead of X11 XImages because it is faster. To maintain compatibility with old computers an OpenGL 1.5 context is created (no shaders needed).

To enable or disable OpenGL just use a CMake flag:

cmake .. -DUSE_OPENGL_API=ON -DUSE_WAYLAND_API=OFF
# or
cmake .. -DUSE_OPENGL_API=OFF -DUSE_WAYLAND_API=OFF

Wayland (Linux)

Depends on gcc and wayland-client and wayland-cursor. Built using the wayland-gcc variants.

If you use CMake just enable the flag:

mkdir build
cd build
cmake .. -DUSE_WAYLAND_API=ON

Web (WASM)

Download and install Emscripten. When configuring your CMake build, specify the Emscripten toolchain file. Then proceed to build as usual.

Building and running the examples

cmake -DCMAKE_TOOLCHAIN_FILE=/path/to/emsdk/<version>/emscripten/cmake/Modules/Platform/Emscripten.cmake -S . -B build
cmake --build build

Note: On Windows, you will need a build tool other than Visual Studio. Ninja is the best and easiest option. Simply download it, put the ninja.exe executable somewhere, and make it available on the command line via your PATH environment variable. Then invoke the first command above with the addition of -G Ninja at the end.

Then open the file build/index.html in your browser to view the example index.

The examples are build using the Emscripten flag -sSINGLE_FILE, which will coalesce the .js and .wasm files into a single .js file. If you build your own apps without the -sSINGLE_FILE flag, you can not simply open the .html file in the browser from disk. Instead, you need an HTTP server to serve the build output. The simplest solution for that is Python's http.server module:

python3 -m http.server build/

You can then open the index at http://localhost:8000 in your browser.

Integrating a MiniFB app in a website

To build an executable target for the web, you need to add a linker option specifying its module name, e.g.:

target_link_options(my_app PRIVATE "-sEXPORT_NAME=my_app")

The Emscripten toolchain will then build a my_app.wasm and my_app.js file containing your app's WASM code and JavaScript glue code to load the WASM file and run it. To load and run your app, you need to:

  1. Create a <canvas> element with an id attribute matching the title you specify when calling mfb_open_window() or mfb_open_window_ex().
  2. Call the <my_module_name>() in JavaScript.

Example app:

int main() {
    struct mfb_window *window = mfb_open_ex("my_app", 320, 240);
    if (!window)
        return 0;
    uint32_t *buffer = (uint32_t *) malloc(g_width * g_height * 4);
    mfb_update_state state;
    do {
        state = mfb_update_ex(window, buffer, 320, 200);
        if (state != STATE_OK) {
            break;
        }
    } while(mfb_wait_sync(window));
    return 0;
}

Assuming the build will generate my_app.wasm and my_app.js, the simplest .html file to load and run the app would look like this:

<html>
<!DOCTYPE html>
<html lang="en">
<head>
    <meta charset='utf-8'>
    <meta http-equiv='X-UA-Compatible' content='IE=edge'>
    <meta name='viewport' content='width=device-width, initial-scale=1'>
    <!-- Load the app's .js file -->
    <script src="./my_app.js"></script>
</head>
<body>
<div>
    <canvas id="Noise Test" style="background: #000;"></canvas>
</div>
<script>
    // Call the app's main() function
    noise();
</script>
</body>
</html>

Limitations & caveats

The web backend currently does not support the following MiniFB features:

  • The flags to mfb_open_ex() are ignored
  • mfb_set_viewport() (no-op)
  • mfb_set_viewport_best_fit() (no-op)
  • mfb_get_monitor_dpi() (reports a fixed value)
  • mfb_get_monitor_scale() (reports a fixed value)
  • mfb_set_target_fps() (no-op)
  • mfb_get_target_fps() (no-op)

Everything else is supported.

When calling mfb_open() or mfb_open_ex(), the specified title must match the id attribute of a <canvas> element in the DOM. The functions will modify the width and height attribute of the <canvas> element. If not already set, then the functions will also modify the CSS style width and height attributes of the canvas.

Setting the CSS width and height of the canvas allows you to up-scale the framebuffer arbitrarily:

// Request a 320x240 window
mfb_open("my_app", 320, 240);

// Up-scale 2x via CSS
<canvas id="my_app" style="width: 640px; height: 480px">

If not already set, the backend will also set a handfull of CSS styles on the canvas that are good defaults for pixel graphics.

  • image-rendering: pixelated
  • user-select: none
  • border: none
  • outline-style: none;

How to add it to your project

First add this repository as a submodule in your dependencies folder. Something like dependencies/:

git submodule add https://github.com/emoon/minifb.git dependencies/minifb

Then in your CMakeLists.txt file, include the following:

add_subdirectory(dependencies/minifb)

# Link MiniFB to your project:
target_link_libraries(${PROJECT_NAME}
    minifb
)

Fill out the rest of your CMakeLists.txt file with your source files and dependencies.