/me176c-boot

Custom, unlocked bootloader for ASUS MeMO Pad 7 (ME176C(X))

Primary LanguageC

me176c-boot Build Status

me176c-boot is a custom, unlocked bootloader for the ASUS MeMO Pad 7 (ME176C(X)). It consists out of a fork of systemd-boot, a simple UEFI boot manager and android-efi, a simple bootloader for Android™ boot images.

Features

  • Boot into Android, Recovery and Fastboot
  • Unlocked bootloader, can boot into custom ROMs
  • Completely open-source and custom built for ASUS MeMO Pad (ME176C(X))
  • Flexible configuration to add further boot targets (e.g. Linux dual boot)

Installation

  1. Make sure that you are running Android 5.0 (Lollipop).
  2. Download and unpack esp.zip from the latest release.
  3. Make sure you have Fastboot installed.
  4. Boot the tablet into Fastboot mode: On the stock ROM, press Volume Down + Power, and release the Power button once the backlight turns on.
  5. Connect the tablet to your PC, and verify that it shows up in fastboot devices.
  6. Flash the new EFI System Partition (ESP) extracted from the downloaded ZIP: fastboot flash ESP esp.img
  7. Recommended: Configure the bootloader to use the stock charger for offline mode charging

Usage

By default, the bootloader will boot into the main Android system. You can recognize the bootloader by the green Android robot that is shown on boot.

Press Volume Down while booting to show the boot menu. Navigate through the menu with the Volume Down key. Press Volume Up to select an option. The Power button is not working inside the boot menu.

Configuration

You can access the (systemd-boot) configuration files from Recovery: go to Mount and select EFI System Partiton (ESP). Then you can access the ESP using ADB at /esp.

Here are some links with more information how to configure the bootloader:

Booting from other partitions

There is an additional volume option in me176c-boot that allows booting from other partitions on the internal storage, based on their GPT partition UUID. The partition needs to be formatted as FAT32.

Examples

Limitations

The "BIOS" of the tablet can boot from the internal storage and USB(-OTG). It does not seem to be able to boot directly from external SD cards. However, it is possible to keep most of the system on the external SD card by placing only the kernel (the boot partition) on the internal storage.

The EFI System Partition (ESP) is severely limited in its size (only 16 MiB), which is usually not enough to keep more than one Linux kernel. That's why me176c-boot supports booting from other partitions on the internal storage.

Setting up an additional ESP partition

There is an unneeded APD (ASUS Product Demo) partition on the tablet, which has a reasonable amount of storage (~300 MiB) and is therefore ideal as additional ESP partition. It contains a few demo product images/media files that are only used for the "demo mode" on the stock ROM.

  1. Boot into TWRP recovery (you'll need to install TWRP for this device, which you can find here and make a backup of the APD (ASUS Product Demo) partition. Store in it a safe place in case you want to restore it.

  2. Wipe the APD partition, and change its file system to FAT32.

  3. Place the EFI application (e.g. Linux) on the APD partition, and use it in a boot target using the volume option:

    # Partition UUID of the APD partition
volume  80868086-8086-8086-8086-000000000007

Troubleshooting

In some cases booting may fail or you make a mistake during the installation. In this case, first power off the tablet by holding the Power button until it turns off.

Recovery

Even with the bootloader entirely broken, you can still boot into Fastboot mode using the rescue mode ("DNX mode").

  1. Download the stock ROM (UL-K013-WW-12.10.1.36-user.zip)
  2. Extract esp.zip and droidboot.img from the downloaded ZIP.
  3. Extract EFI/Intel/efilinux.efi from esp.zip.
  4. Press Volume Up + Volume Down + Power until "Fastboot starting..." shows up on the display.
  5. Connect the tablet to your PC, and verify that it shows up in fastboot devices.
  6. fastboot flash osloader efilinux.efi
fastboot boot droidboot.img

Building

  1. git clone --recursive https://github.com/me176c-dev/me176c-boot.git
  2. ./build-esp.sh (some commands require root, make sure you can use sudo)
  3. esp.img and esp.zip are in the build directory

Project setup

This repository contains 3 separate components:

  • bootstrap (EFI/BOOT/bootx64.efi): See bootstrap.
  • systemd-boot (systemd-bootx64.efi): A submodule that points to the current version of the systemd-boot fork.
  • android-efi: (android.efi): The bootloader that boots into Android boot images.