Issues
- 5
Low memory error
#1964 opened by alexdan-77 - 2
- 2
module doesnt restart
#1965 opened by alexdan-77 - 10
Error A11 816 after updating to 3.7.0 dev
#1937 opened by AzonInc - 3
Can't upgrade from 3.6.4 to 3.6.5
#1960 opened by eelcohn - 3
Heatpump WLW186 with BC400/RC220 and failure message
#1963 opened by UlfHRO - 7
API: Post/Put does not change http Get values immediately for thermostat/dhw entities - just on next telegram read
#1950 opened by tp1de - 4
Heatpump with BC400/RC220 DHW mode and Energiemanager
#1957 opened by UlfHRO - 5
[3.7.0-dev.32] virtual remote w/ RC220
#1955 opened by Bingo2023 - 1
- 8
Updates to webUI
#1920 opened by proddy - 8
HA MQTT: climate entity id's are language dependend
#1947 opened by tp1de - 4
- 14
Missing entities for cooling devices
#1857 opened by thombec - 7
correct firmware naming
#1933 opened by proddy - 3
nrgtotal, nrgheat, dhw.nrg are not reported correctly in 3.7.0-dev.30 compared to 3.6.5
#1938 opened by paludi - 3
- 8
Change key-names in JSON to be compliant and consistent
#1860 opened by proddy - 10
WiFi scan not working when EMS-ESP is an Access Point
#1922 opened by proddy - 6
- 29
RTC WAtchdog reboots and strange system/send with NAN
#1935 opened by harvey637 - 4
Modbus Issue Writing to Heating Temperature
#1894 opened by wint100 - 10
Long raw custom entities is crashing gateway
#1934 opened by tp1de - 23
MQTT Configuration vanished without an reason
#1930 opened by zaphood1967 - 6
- 28
Supporting latest Arduino Core v3 - issues with fixed Network IP address, settings lost after upgrade etc
#1804 opened by tp1de - 10
add Thermostat RC220 for BC400 HP
#1838 opened by Bingo2023 - 4
serial shell not working
#1926 opened by MichaelDvP - 4
Unexpected Application Error
#1929 opened by mattreim - 5
Device specific commands
#1897 opened by MichaelDvP - 5
Feature: call schedule entries via command
#1893 opened by proddy - 8
Buderus BC400: HK1 Summer Mode not available
#1904 opened by Hank2419 - 8
Device Naming Confusion
#1871 opened by dleding - 6
- 32
system send / response does not seem to work anymore correctly with mqtt and api
#1886 opened by tp1de - 6
MQTT Discovery in HA throws an error after upgrade to 2024.7.3 - MQTT settings lost after reboot
#1882 opened by zaphood1967 - 2
BBQKees Gateway S32 crashes after update to EMS-ESP-3_7_0-dev_27-ESP32_16M or later
#1909 opened by Andi252 - 48
Feature: Conditions
#1806 opened by proddy - 4
Lots of warnings since dev.26
#1902 opened by mattreim - 10
- 12
Keenetic cloud authorised web access not working
#1890 opened by Seziksezik - 2
Feature: message notification
#1854 opened by proddy - 9
- 4
different information of mm100 modules in EMS network
#1887 opened by Seziksezik - 8
New Bosch HP only recognizes CR10/CR11, CR10H/CR11H, CR20RF, RT800 as remote thermostats
#1867 opened by christic73 - 2
Edit Temperature Sensor - Default name from ID to long
#1859 opened by jeschofnik - 1
- 6
Reboot Loop with latest development build 22
#1849 opened by RalfLuig - 1
Distinguish better heat pumps from boilers
#1836 opened by proddy - 2
Download for latest Beta not working 404 error
#1808 opened by RalfLuig