enclustra-bsp/bsp-xilinx

Issues

• remoteproc0 not available after loading the zynqmp_r5_remoteproc module

  #44 opened 3 months ago by bitscribble
  2

• MARS ZX2: SSH Connection Refused

  #43 opened 6 months ago by SvenBotha
  2

• ERROR: Error running make EBE_OVERLAYS={ebe_overlays} -j9 for Buildroot

  #21 opened 5 years ago by wangyuanzhengbighead
  6

• Buildroot failed after a fresh GitClone

  #42 opened a year ago by pmaillard23
  1

• ERROR: Error running make EBE_OVERLAYS={ebe_overlays} -j3 for Buildroot

  #41 opened 2 years ago by DanW0830
  3

• Cloned git, ran build.sh and got errors. Anyone seen this before?

  #40 opened 2 years ago by DanielW0830
  1

• Broken U-Boot build in Project mode: Mars MA-ZX3-20-2I-D10 on ST3

  #39 opened 3 years ago by icchalmers
  1

• build error from libzlib 1.2.11

  #38 opened 3 years ago by normbed
  1

• Ethernet broken in v.1.9

  #37 opened 3 years ago by tsat-psv
  0

• Problem booting using SD Card

  #36 opened 3 years ago by GNiramay
  6

• Toolchain issue on Dev

  #35 opened 3 years ago by gbalke
  5

• Buildroot fails to build in RedHat 7.9

  #34 opened 4 years ago by giuliocreva
  0

• how to boot from emmc?

  #33 opened 4 years ago by wangyuanzhengbighead
  5

• only eth0 can work? how to config it make both eth0 and eth1 work

  #32 opened 4 years ago by wangyuanzhengbighead
  2

• Performance evaluatio of XU1

  #31 opened 4 years ago by flpm2
  9

• i can't make new image,what't the problem

  #29 opened 4 years ago by wangyuanzhengbighead
  6

• how to Use network ssh enter the board

  #30 opened 4 years ago by wangyuanzhengbighead
  2

• host-e2fsprogs 1.43.3 Building conflict with glibc

  #6 opened 6 years ago by j4munoz
  7

• Upgrading to v2020.1 kernel, not starting.

  #27 opened 4 years ago by markus-k
  5

• UBOOT build fails with missing default configuration

  #26 opened 4 years ago by pwittich
  4

• usb 2.0 not work on Mercury+ PE1

  #24 opened 4 years ago by wangyuanzhengbighead
  3

• Buildroot fails to build in Debian 10

  #28 opened 4 years ago by mik1234mc
  2

• Which version of Python3 did you test with? Error in Python 3.6.9

  #22 opened 4 years ago by mbanders
  2

• usb2.0 port not work

  #23 opened 4 years ago by wangyuanzhengbighead
  0

• Documentation link leads to 404

  #25 opened 4 years ago by markus-k
  2

• Ubuntu 18.10 compile note

  #7 opened 4 years ago by eiselekd
  0

• [ZX1][PE1] Can't get into U-Boot with UART

  #20 opened 5 years ago by faku99
  3

• how to communication with cortex r5 in xu5？

  #18 opened 5 years ago by sesmfs
  0

• Problems with SD boot on Mercury XU5 and Mercury PE1-300

  #11 opened 6 years ago by DNR1406
  10

• How to create .bsp file to build PYNQ image for enclustra board

  #17 opened 5 years ago by shravan-red
  1

• dialog error

  #16 opened 5 years ago by 75Systems001
  0

• Generate a new device tree after changing the fpga design

  #12 opened 6 years ago by Usam95
  1

• XCZU15EG shows only 2GiB of RAM instead of 4GiB

  #10 opened 6 years ago by j4munoz
  4

• Linker misses --fix-cortex-a53-843419

  #3 opened 6 years ago by niklas88
  1

• arm-none-linux-gnueabi toolchain is missing sysroot support

  #9 opened 6 years ago by andreca
  1

• Buildroot fails to build with local compiler

  #8 opened 6 years ago by tsat-psv
  3

• No uImage when building for XU1 & PE1

  #4 opened 6 years ago by thetemplar
  1

• Busybox buildroot login

  #1 opened 7 years ago
  2

• Rootfile system

  #2 opened 8 years ago by schegde
  2