energia/msp430-lg-core

Issues

• MSP430: Error initializing emulator: No USB FET was found MacOs

  #137 opened 2 years ago by MaxiZm
  1

• LEDs light up incorrectly on MSP-EXP4302ET

  #136 opened 2 years ago
  1

• Sparkfun icm 20498 arduino libraries migration problem for msp430fr5994

  #135 opened 3 years ago by tarunrtes
  12

• Integrate MSP-GCC 7.3.1.24 in main distribution channel

  #74 opened 6 years ago by rei-vilo
  2

• Release 2.0.9 with msp430-elf-gcc 9.2.0.50 fails to build the `Blink` example against the MSP430FR5994.

  #131 opened 4 years ago by rei-vilo
  3

• Release `2.0.10` with `-DF_CPU=16000000L` and FRAM

  #132 opened 4 years ago by rei-vilo
  3

• Install this package to use your Energia/MSP430 Tool board

  #128 opened 5 years ago by rei-vilo
  2

• FR5994 - I2C port config wrong

  #133 opened 4 years ago by StefanSch
  1

• msp430-elf-gcc and DSLite need to be updated for MSP430FR2476

  #120 opened 5 years ago by rei-vilo
  6

• DSLite 9.3.0.1863 macOS notarisation issue

  #129 opened 5 years ago by rei-vilo
  4

• macOS 10.14 — Upload to MSP430FR5994 Fails

  #69 opened 5 years ago by rei-vilo
  4

• Issue with wire lib and G2553

  #125 opened 5 years ago by StefanSch
  1

• Update MSP430 DriverLib to 2.91.13.01

  #127 opened 5 years ago by rei-vilo
  1

• GCC 4.6.6 compiler package: msp430.h file misses FR2155

  #124 opened 5 years ago by LambertusIJsselstein
  1

• GCC 4.6.6 compiler package: msp430.h file misses FR2355

  #77 opened 5 years ago by StefanSch
  1

• Why aren't the msp430 gcc support files 1.208 used?

  #123 opened 5 years ago by trick2011
  7

• "__init_array_start" symbol (msp430fr5994.ld) is not word aligned

  #122 opened 5 years ago by rei-vilo
  5

• Unable to load sketch to MSP430G2553-ET with wrong MSP430G2553 selected

  #121 opened 5 years ago by gmagannaDevelop
  5

• Wire library does not send stop condition when receiving as a master on MSP430 eUSCI module

  #119 opened 5 years ago by llozi
  0

• usi_spi.cpp: bad workaround of USI5 errata

  #117 opened 5 years ago by eurol
  0

• I2C 400KHz not Working On MSP430FR2433

  #105 opened 6 years ago by mhmayyan
  10

• MSP-EXP430G2ETxxxx variants are missing in master branch

  #89 opened 6 years ago by StefanSch
  1

• MSP430G2452 has issue with I2C

  #113 opened 6 years ago by StefanSch
  0

• Mapping of UART pins is swapped for MSP430G launchpads

  #111 opened 6 years ago by StefanSch
  0

• PLACE_IN_FRAM does not place code in FRAM

  #107 opened 6 years ago by StefanSch
  1

• Compiler result differs between Windows and Ubuntu

  #104 opened 6 years ago by mhmayyan
  0

• Updated I²C library — Feed-back + suggestion

  #97 opened 6 years ago by rei-vilo
  3

• New release for MSP430 boards package

  #95 opened 6 years ago by rei-vilo
  0

• EUSCI_B0_VECTOR not declared for MSP-EXP430FR5969LP and MSP-EXP430FR6989LP

  #94 opened 6 years ago by rei-vilo
  2

• MSP430FR5994 GPIO pin 18 no longer works as an `OUPUT`

  #90 opened 6 years ago by rei-vilo
  1

• attachInterrupt() doesn't work on MSP430FR5994

  #83 opened 6 years ago by rei-vilo
  2

• Where is former msp430-ng-core?

  #88 opened 6 years ago by rei-vilo
  2

• Release msp430elf boards package for extended FRAM

  #87 opened 6 years ago by rei-vilo
  0

• macOS: Update to DSLite 8.2.0

  #85 opened 6 years ago by rei-vilo
  0

• Hardware I²C No Longer Works on MSP432G2553 and MSP430FR5994

  #62 opened 6 years ago by rei-vilo
  6

• MSP430FR2355 with 4 KB RAM

  #81 opened 6 years ago by rei-vilo
  2

• FR5994 maps Port2 and higher wrong

  #79 opened 6 years ago by StefanSch
  1

• 2 UARTs MSP430FR5994

  #72 opened 6 years ago by rei-vilo
  4

• Debug UART on FR2355 is mapped to wrong channel

  #76 opened 6 years ago by StefanSch
  1

• GCC 7.3.1 — Link Fails When Using Serial

  #75 opened 6 years ago by rei-vilo
  3

• PLACE_IN_FRAM Error Message

  #70 opened 6 years ago by rei-vilo
  6

• Support for GCC MSP430 6.4.0.32?

  #63 opened 7 years ago by rei-vilo
  4

• Energia MSP430 boards release 1.0.4 — CRC corrupted

  #71 opened 6 years ago by rei-vilo
  1

• Add Support for Second UART

  #68 opened 6 years ago by rei-vilo
  3

• [MSP430G2553] sleep() sleepSeconds() duration issue

  #66 opened 6 years ago by battosai30
  0

• MSP430FR2433 - Wrong A0 pin

  #65 opened 7 years ago by dberenguer
  1

• Add all ports to WInterrupt.c

  #64 opened 7 years ago by robertinant
  0

• How to Add Support for MSP430G2955

  #61 opened 7 years ago by rei-vilo
  9

• DriverLib uses some new core function which are not supported by GCC4.6

  #57 opened 7 years ago by StefanSch
  1

• MSP430FR4133 — Issue with I²C

  #55 opened 7 years ago by rei-vilo
  9