node-ses
==========
A simple and reliable Node.js mail for sending mail through Amazon SES.
Benefits
- Does only one thing and does it well. Only the SendEmail and SendRawEmail API methods are implemented.
- Good error handling:
- Only "2xx" and "3xx" responses from Amazon are considered successful.
- Amazon's XML format errors are converted to JavaScript options for easy handling.
- Support for the
debug
module is included if debugging is needed.
- Tested and reliable. Includes test suite. Sending email to SES since 2012.
Synopsis
Start by creating a client object, and then call either the sendEmail
or sendRawEmail
method
depending on your needs.
var ses = require('node-ses')
, client = ses.createClient({ key: 'key', secret: 'secret' });
// Give SES the details and let it construct the message for you.
client.sendEmail({
to: 'aaron.heckmann+github@gmail.com'
, from: 'somewhereOverTheR@inbow.com'
, cc: 'theWickedWitch@nerds.net'
, bcc: ['canAlsoBe@nArray.com', 'forrealz@.org']
, subject: 'greetings'
, message: 'your <b>message</b> goes here'
, altText: 'plain text'
}, function (err, data, res) {
// ...
});
// ... or build a message from scratch yourself and send it.
client.sendRawEmail({
, from: 'somewhereOverTheR@inbow.com'
, rawMessage: rawMessage
}, function (err, data, res) {
// ...
});
Installation
npm install node-ses
The module has one primary export:
createClient()
You'll probably only be using this method. It takes an options object with the following properties:
`key` - your AWS SES key. Defaults to checking `process.env.AWS_ACCESS_KEY_ID` and `process.env.AWS_ACCESS_KEY`
`secret` - your AWS SES secret. Defaults to `process.env.AWS_SECRET_ACCESS_KEY` and `process.env.AWS_SECRET_KEY`
`amazon` - [optional] the amazon end-point uri. defaults to `https://email.us-east-1.amazonaws.com`
Not all AWS regions support SES. Check SES region support to be sure the region you are in is supported.
var ses = require('node-ses')
, client = ses.createClient({ key: 'key', secret: 'secret' });
client.sendEmail(options, function (err, data, res))
Composes an email message based on input data, and then immediately queues the message for sending.
There are several important points to know about SendEmail:
- You can only send email from verified email addresses and domains; otherwise, you will get an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you must also verify every recipient email address except for the recipients provided by the Amazon SES mailbox simulator. For more information, go to the Amazon SES Developer Guide.
- The total size of the message cannot exceed 10 MB. This includes any attachments that are part of the message.
- Amazon SES has a limit on the total number of recipients per message. The combined number of To:, CC: and BCC: email addresses cannot exceed 50. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call Amazon SES repeatedly to send the message to each group.
- For every message that you send, the total number of recipients (To:, CC: and BCC:) is counted against your sending quota - the maximum number of emails you can send in a 24-hour period. For information about your sending quota, go to the Amazon SES Developer Guide.
sendEmail
receives an options object with the following properties:
`from` - email address from which to send (required)
`subject` - string (required). Must be encoded as UTF-8
`message` - can be html (required). Must be encoded as UTF-8.
`altText` - plain text version of message. Must be encoded as UTF-8.
`to` - email address or array of addresses
`cc` - email address or array of addresses
`bcc` - email address or array of addresses
`replyTo` - email address
`configurationSet` - SES configuration set name
`messageTags` - SES message tags: array of name/value objects, e.g. { name: xid, value: 1 }
At least one of to
, cc
or bcc
is required.
Optional properties (overrides the values set in createClient
):
`key` - AWS key
`secret` - AWS secret
`amazon` - AWS end point. Defaults to `https://email.us-east-1.amazonaws.com`
The sendEmail
method transports your message to the AWS SES service. If Amazon
returns an HTTP status code that's less than 200
or greater than or equal to
400, we will callback with an err
object that is a direct translation of the XML error Amazon provides.
See Error Handling section below for details on the structure of returned errors.
Check for errors returned since a 400 status is not uncommon.
The data
returned in the callback is the HTTP body returned by Amazon as XML.
See the SES API Response docs for details.
The res
returned by the callback represents the HTTP response to calling the SES REST API as the request module returns it.
The sendEmail method also be provided in all lowercase as sendemail
for backwards compatibility.
client.sendRawEmail(options, function (err, data, res))
Sends an email message, with header and content specified by the client. The SendRawEmail action is useful for sending multipart MIME emails. The raw text of the message must comply with Internet email standards; otherwise, the message cannot be sent.
There are several important points to know about SendRawEmail:
- You can only send email from verified email addresses and domains; otherwise, you will get an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you must also verify every recipient email address except for the recipients provided by the Amazon SES mailbox simulator. For more information, go to the Amazon SES Developer Guide.
- The total size of the message cannot exceed 10 MB. This includes any attachments that are part of the message.
- Amazon SES has a limit on the total number of recipients per message. The combined number of To:, CC: and BCC: email addresses cannot exceed 50. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call Amazon SES repeatedly to send the message to each group.
- The To:, CC:, and BCC: headers in the raw message can contain a group list. Note that each recipient in a group list counts towards the 50-recipient limit. For every message that you send, the total number of recipients (To:, CC: and BCC:) is counted against your sending quota - the maximum number of emails you can send in a 24-hour period. For information about your sending quota, go to the Amazon SES Developer Guide.
sendRawEmail
receives an options object with the following properties:
`from` - email address from which to send (required)
`rawMessage` - the raw text of the message which includes a header and a body (required)
Within the raw text of the message, the following must be observed:
- The
rawMessage
value must contain a header and a body, separated by a blank line. - All required header fields must be present.
- Each part of a multipart MIME message must be formatted properly.
- MIME content types must be among those supported by Amazon SES. For more information, see the Amazon SES Developer Guide.
- The
rawMessage
content must be base64-encoded, if MIME requires it.
The sendRawEmail
method transports your message to the AWS SES service. If Amazon
returns an HTTP status code that's less than 200
or greater than or equal to
400, we will callback with an err
object that is a direct translation of the XML error Amazon provides.
See [error handling] section below for details on the structure of returned errors.
Example
var CRLF = '\r\n'
, ses = require('node-ses')
, client = ses.createClient({ key: 'key', secret: 'secret' })
, rawMessage = [
'From: "Someone" <someone@example.com>',
'To: "Someone Else" <other@example.com>',
'Subject: greetings',
'Content-Type: multipart/mixed;',
' boundary="_003_97DCB304C5294779BEBCFC8357FCC4D2"',
'MIME-Version: 1.0',
'',
'--_003_97DCB304C5294779BEBCFC8357FCC4D2',
'Content-Type: text/plain; charset="us-ascii"',
'Content-Transfer-Encoding: quoted-printable',
'Hi brozeph,',
'',
'I have attached a code file for you.',
'',
'Cheers.',
'',
'--_003_97DCB304C5294779BEBCFC8357FCC4D2',
'Content-Type: text/plain; name="code.txt"',
'Content-Description: code.txt',
'Content-Disposition: attachment; filename="code.txt"; size=4;',
' creation-date="Mon, 03 Aug 2015 11:39:39 GMT";',
' modification-date="Mon, 03 Aug 2015 11:39:39 GMT"',
'Content-Transfer-Encoding: base64',
'',
'ZWNobyBoZWxsbyB3b3JsZAo=',
'',
'--_003_97DCB304C5294779BEBCFC8357FCC4D2',
''
].join(CRLF);
client.sendRawEmail({
, from: 'someone@example.com'
, rawMessage: rawMessage
}, function (err, data, res) {
// ...
});
Check for errors returned since a 400 status is not uncommon.
The data
returned in the callback is the HTTP body returned by Amazon as XML.
See the SES API Response docs for details.
The res
returned by the callback represents the HTTP response to calling the SES REST API as the request module returns it.
Error Handling
The errors returned when sending failed are JavaScript objects that correspond to the Error element as seen in Structure of an Error Response from the official documentation. The properties in error object we return include:
- A
Type
element that identifies whether the error was a Receiver, Sender, or NodeSesInternal error - A
Code
element that identifies the type of error that occurred - A
Message
element that describes the error condition in a human-readable form - A
Detail
element that might give additional details about the error or might be empty
An error of Type NodeSesInternal
is returned in three cases:
- If the HTTP request to AWS fails so that we don't get a normal resposne from AWS. The
Code
will beRequestError
and theMessage
will contain the HTTP request error. - If we fail to parse the XML returned by AWS. The
Code
will be set toParseError
and theMessage
will contain the error returned from our XML parser. - If we parse the XML returned by AWS but for some reason it doesn't conform to expected structure. The
Code
wll be set toXmlError
and theMessage
will be set to the parsed XML.
Example error response:
{
"Type": "Sender",
"Code": "ValidationError",
"Message": "Value null at 'message.subject' failed to satisfy constraint: Member must not be null"
}
Debugging
# Enable in the shell
DEBUG="node-ses" ./server.js
// ... or temporarily set in your code before `node-ses` is required.
process.env.DEBUG='node-ses';
When debugging, it's useful to inspect the raw HTTP request and response send to Amazon. These can then checked against Amazon's documentation for the SendMail API method and the common errors that Amazon might return.
To turn on debugging printed to STDERR, set DEBUG=node-ses
in the environment before running your script. You can also set process.env.DEBUG='node-ses';
in your code, before the node-ses
module is required.
See the debug module docs for more debug output possibilities.
Running the Tests
Unit tests
npm test
To run the full tests, including actually using the AWS SES REST APIs with your credentials, set the following environment variables:
# Your SES Key and secret
NODE_SES_KEY
NODE_SES_SECRET
# An email that is both an verified sende that can also receive test emails. Possibly your own email address
NODE_SES_EMAIL
See Also
- node-ses-any-promise is a fork with a promise-based API.
- nodemailer has more features, including attachment support. There are many "transport" plugins available for it, including one for SES.