This repository contains the material for the Nextflow workshop that forms part of the Rocky Mountain Genomics HackCon 2018 in Boulder, Colorado between 18 and 23 June 2018.
We have provided AWS instances for users for the duration of the workhop.
During this period, the only requirement is a computer with ssh access.
If you wish to go through the workshop on your own machine at any other time, the prerequisties are as follows:
- Java 8
- Singularity 2.3.x (or higher) or
- Docker engine 1.10.x (or higher)
-
SSH in you instance node:
ssh student@your.personal.instance.IP
See the slack channel for your personal instance IP.
Install Nextflow by using the following command:
curl -fsSL get.nextflow.io | bash
The above snippet creates the nextflow launcher in the current directory.
Complete the installation moving it into a directory on your PATH eg:
mkdir bin
mv nextflow $HOME/bin/
We moving to the hand-ons section where we will implement a proof-of-concept RNA-Seq pipeline.
First we clone this repository with the following command:
git clone https://github.com/nextflow-io/rmghc-2018.git && cd rmghc-2018
Our pipeline will:
- Index a trascriptome file
- Perform quality control measures using FastQC
- Performs quantification of reads
- Create a MultiqQC report
Throughout this tutorial we will use a series of minimal Nextflow scripts which aim to slowly introduce how to do things in Nextflow.
Before running each file, be sure to examine the script and try to understand what is happening.
If in doubt, first refer to the documentation.
The script script1.nf defines the pipeline input parameters. Run it by using the
following command:
nextflow run script1.nf
Try to specify a different input parameter, for example:
nextflow run script1.nf --reads this/and/that
Modify the script1.nf adding a fourth parameter named outdir and set it to a default path
that will be used as the pipeline output directory.
In this step you have learned:
- How to define input parameters in your pipeline script
- How to pass parameters using the command line
Nextflow allows the execution of any command or user script by using a process definition.
A process is defined by providing three main declarations: the process inputs, the process outputs and finally the command script.
The second example adds the index process. Open it to see how the process is defined.
It takes the transcriptome file as input and creates the transcriptome index by using the salmon tool.
Note how the input declaration defines a transcriptome variable in the process context
that it is used in the command script to reference that file in the Salmon command line.
Try to run it by using the command:
nextflow run script2.nf
The execution will fail because Salmon is not installed in your environment.
Add the command line option -with-singularity to launch the execution through a Singularity/Docker image
as shown below:
nextflow run script2.nf -with-singularity
This time it works because it uses the Docker container nextflow/rnaseq-nf defined in the
nextflow.config file.
In order to avoid to add the option -with-singularity add the following line in the nextflow.config file:
singularity.enabled = true
Enable the Singularity execution by default adding the above setting in the nextflow.config file.
Examine the work directory to see how Nextflow organises tasks in directories.
In this step you have learned:
- How to define a process executing a custom command
- How process inputs are declared
- How process outputs are declared
- How to invoke containers
- How work directories are organised
This step shows how to match read files into pairs, so they can be mapped by Salmon.
Edit the script script3.nf and add the following statement as the last line:
read_pairs_ch.println()
Save it and execute it with the following command:
nextflow run script3.nf
It will print an output similar to the one shown below:
[ggal_gut, [/../data/ggal/gut_1.fq, /../data/ggal/gut_2.fq]]
The above example shows how the read_pairs_ch channel emits tuples composed by
two elements, where the first is the read pair prefix and the second is a list
representing the actual files.
Try it again specifying different read files by using a glob pattern:
nextflow run script3.nf --reads 'data/ggal/*_{1,2}.fq'
Use the set operator in place
of = assignment to define the read_pairs_ch channel.
Use the ifEmpty operator
to check if the read_pairs_ch contains at least an item.
In this step you have learned:
- How to use
fromFilePairsto handle read pair files - How to use the
setoperator to define a new channel variable - How to use the
ifEmptyoperator to check if a channel is empty
The script script4.nf adds the quantification process.
In this script note as the index_ch channel, declared as output in the index process,
is now used as a channel in the input section.
Also note as the second input is declared as a set composed by two elements:
the pair_id and the reads in order to match the structure of the items emitted
by the read_pairs_ch channel.
Execute it by using the following command:
nextflow run script4.nf
You will see the execution of a quantication process.
Execute it again adding the -resume option as shown below:
nextflow run script4.nf -resume
The -resume option skips the execution of any step that has been processed in a previous
execution.
Try to execute it with more read files as shown below:
nextflow run script4.nf -resume --reads 'data/ggal/*_{1,2}.fq'
You will notice that the quantification process is executed more than
one time.
Nextflow parallelizes the execution of your pipeline simply by providing multiple input data to your script.
Add a tag directive to the
quantification process to provide a more readable execution log .
Add a publishDir directive
to the quantification process to store the process results into a directory of your
choice.
In this step you have learned:
- How to connect two processes by using the channel declarations
- How to resume the script execution skipping already already computed steps
- How to use the
tagdirective to provide a more readable execution output - How to use the
publishDirto store a process results in a path of your choice
This step implements a quality control of your input reads. The inputs are the same
read pairs which are provided to the quantification steps
You can run it by using the following command:
nextflow run script5.nf -resume
The script will report the following error message:
Channel `read_pairs_ch` has been used twice as an input by process `fastqc` and process `quantification`
Modify the creation of the read_pairs_ch channel by using a into
operator in place of a set.
Tip: see an example here.
In this step you have learned:
- How to use the
intooperator to create multiple copies of the same channel
This step collect the outputs from the quantification and fastqc steps to create
a final report by using the MultiQC tool.
Execute the script with the following command:
nextflow run script6.nf -resume --reads 'data/ggal/*_{1,2}.fq'
It creates the final report in the results folder in the current work directory.
In this script note the use of the mix
and collect operators chained
together to get all the outputs of the quantification and fastqc process as a single
input.
In this step you have learned:
- How to collect many outputs to a single input with the
collectoperator - How to
mixtwo channels in a single channel - How to chain two or more operators togethers
This step shows how to execute an action when the pipeline completes the execution.
Note that Nextflow processes define the execution of asynchronous tasks i.e. they are not executed one after another as they are written in the pipeline script as it would happen in a common imperative programming language.
The script uses the workflow.onComplete event handler to print a confirmation message
when the script completes.
Try to run it by using the following command:
nextflow run script7.nf -resume --reads 'data/ggal/*_{1,2}.fq'
Real world pipelines use a lot of custom user scripts (BASH, R, Python, etc). Nextflow
allows you to use and manage all these scripts in consistent manner. Simply put them
in a directory named bin in the pipeline project root. They will be automatically added
to the pipeline execution PATH.
For example, create a file named fastqc.sh with the following content:
#!/bin/bash
set -e
set -u
sample_id=${1}
reads=${2}
mkdir fastqc_${sample_id}_logs
fastqc -o fastqc_${sample_id}_logs -f fastq -q ${reads}
Save it, grant the execute permission and move it in the bin directory as shown below:
chmod +x fastqc.sh
mkdir -p bin
mv fastqc.sh bin
Then, open the script7.nf file and replace the fastqc process' script with
the following code:
script:
"""
fastqc.sh "$sample_id" "$reads"
"""
Run it as before:
nextflow run script7.nf -resume --reads 'data/ggal/*_{1,2}.fq'
In this step you have learned:
- How to write or use existing custom script in your Nextflow pipeline.
- How to avoid the use of absolute paths having your scripts in the
bin/project folder.
Real world genomic application can spawn the execution of thousands of jobs. In this scenario a batch scheduler is commonly used to deploy a pipeline in a computing cluster, allowing the execution of many jobs in parallel across many computing nodes.
Nextflow has built-in support for most common used batch schedulers such as Univa Grid Engine and SLURM between the others.
To run your pipeline with a batch scheduler modify the nextflow.config file specifying
the target executor and the required computing resources if needed. For example:
process.executor = 'slurm'
process.queue = 'short'
process.memory = '10 GB'
process.time = '30 min'
process.cpus = 8
The above configuration specify the use of the SLURM batch scheduler to run the
jobs spawned by your pipeline script. Then it specifies to use the short queue (partition),
10 gigabyte of memory and 8 cpus per job, and each job can run for no more than 30 minutes.
Note: the pipeline must be executed in a shared file system accessible to all the computing nodes.
Print the head of the .command.run script generated by Nextflow in the task work directory
and verify it contains the SLURM #SBATCH directives for the requested resources.
Modify the configuration file to specify different resource request for
the quantification process.
Tip: see the process documentation for an example.
In this step you have learned:
- How to deploy a pipeline in a computing cluster.
- How to specify different computing resources for different pipeline processes.
The Nextflow configuration file can be organised in different profiles to allow the specification of separate settings depending on the target execution environment.
For the sake of this tutorial modify the nextflow.config as shown below:
profiles {
standard {
process.container = 'nextflow/rnaseq-nf'
docker.enabled = true
}
cluster {
process.executor = 'slurm'
process.queue = 'short'
process.memory = '10 GB'
process.time = '30 min'
process.cpus = 8
}
}
The above configuration defines two profiles: standard and cluster. The name of the
profile to use can be specified when running the pipeline script by using the -profile
option. For example:
nextflow run script7.nf -profile cluster
The profile standard is used by default if no other profile is specified by the user.
In this step you have learned:
- How to organise your pipeline configuration in separate profiles
Nextflow allows the execution of a pipeline project directly from a GitHub repository (or similar services eg. BitBucket and GitLab).
This simplifies the sharing and the deployment of complex projects and tracking changes in a consistent manner.
For the sake of this tutorial consider the example project published in the following URL:
https://github.com/nextflow-io/hello
You can run it by specifying the project name as shown below:
nextflow run nextflow-io/hello
It automatically downloads it and store in the $HOME/.nextflow folder.
Use the command info to show the project information, e.g.:
nextflow info nextflow-io/hello
Nextflow allows the execution of a specific revision of your project by using the -r
command line option. For Example:
nextflow run -r v1.2 nextflow-io/hello
Revision are defined by using Git tags or branches defined in the project repository.
This allows a precise control of the changes in your project files and dependencies over time.
Create a new repository in your GitHub account and upload there the pipeline scripts of this tutorial. Then execute it specifying its name on the Nextflow command line.
Tip: see the documentation for further details.
Get practice with basic Docker commands to pull, run and build your own containers.
A container is a ready-to-run Linux environment which can be executed in an isolated manner from the hosting system. It has own copy of the file system, processes space, memory management, etc.
Containers are a Linux feature known as Control Groups or Ccgroups introduced with kernel 2.6.
Docker adds to this concept an handy management tool to build, run and share container images.
These images can be uploaded and published in a centralised repository know as Docker Hub, or hosted by other parties like for example Quay.
Run a container is easy as using the following command:
docker run <container-name>
For example:
docker run hello-world
The pull command allows you to download a Docker image without running it. For example:
docker pull debian:wheezy
The above command download a Debian Linux image.
Launching a BASH shell in the container allows you to operate in an interactive mode in the containerised operating system. For example:
docker run -it debian:wheezy bash
Once launched the container you wil noticed that's running as root (!). Use the usual commands to navigate in the file system.
To exit from the container, stop the BASH session with the exit command.
Docker images are created by using a so called Dockerfile i.e. a simple text file
containing a list of commands to be executed to assemble and configure the image
with the software packages required.
In this step you will create a Docker image containing the Samtools tool.
Warning: the Docker build process automatically copies all files that are located in the
current directory to the Docker daemon in order to create the image. This can take
a lot of time when big/many files exist. For this reason it's important to always work in
a directory containing only the files you really need to include in your Docker image.
Alternatively you can use the .dockerignore file to select the path to exclude from the build.
Then use your favourite editor eg. vim to create a file named Dockerfile and copy the
following content:
FROM debian:wheezy
MAINTAINER <your name>
RUN apt-get update && apt-get install -y curl cowsay
ENV PATH=$PATH:/usr/games/
When done save the file.
Build the Docker image by using the following command:
docker build -t my-image .
Note: don't miss the dot in the above command. When it completes, verify that the image has been created listing all available images:
docker images
You can try your new container by running this command:
docker run my-image cowsay Hello Docker!
Add the Salmon package to the Docker image by adding to the Dockerfile the following snippet:
RUN curl -sSL https://github.com/COMBINE-lab/salmon/releases/download/v0.8.2/Salmon-0.8.2_linux_x86_64.tar.gz | tar xz \
&& mv /Salmon-*/bin/* /usr/bin/ \
&& mv /Salmon-*/lib/* /usr/lib/
Save the file and build again the image with the same command as before:
docker build -t my-image .
You will notice that it creates a new Docker image with the same name but with a different image ID.
Check that everything is fine running Salmon in the container as shown below:
docker run my-image salmon --version
You can even launch a container in an interactive mode by using the following command:
docker run -it my-image bash
Use the exit command to terminate the interactive session.
Create an genome index file by running Salmon in the container.
Try to run Bowtie in the container with the following command:
docker run my-image \
salmon index -t $PWD/data/ggal/transcriptome.fa -i index
The above command fails because Salmon cannot access the input file.
This happens because the container runs in a complete separate file system and it cannot access the hosting file system by default.
You will need to use the --volume command line option to mount the input file(s) eg.
docker run --volume $PWD/data/ggal/transcriptome.fa:/transcriptome.fa my-image \
salmon index -t /transcriptome.fa -i index
An easier way is to mount a parent directory to an identical one in the container, this allows you to use the same path when running it in the container eg.
docker run --volume $HOME:$HOME --workdir $PWD my-image \
salmon index -t $PWD/data/ggal/transcriptome.fa -i index
Publish your container in the Docker Hub to share it with other people.
Create an account in the https://hub.docker.com web site. Then from your shell terminal run the following command, entering the user name and password you specified registering in the Hub:
docker login
Tag the image with your Docker user name account:
docker tag my-image <user-name>/my-image
Finally push it to the Docker Hub:
docker push <user-name>/my-image
After that anyone will be able to download it by using the command:
docker pull <user-name>/my-image
Note how after a pull and push operation, Docker prints the container digest number e.g.
Digest: sha256:aeacbd7ea1154f263cda972a96920fb228b2033544c2641476350b9317dab266
Status: Downloaded newer image for nextflow/rnaseq-nf:latest
This is a unique and immutable identifier that can be used to reference container image in a univocally manner. For example:
docker pull nextflow/rnaseq-nf@sha256:aeacbd7ea1154f263cda972a96920fb228b2033544c2641476350b9317dab266
Singularity is container runtime designed to work in HPC data center, where the usage of Docker is generally not allowed due to security contraints
Singularity implements the container execution model similarly to Docker however using a complete different implementation design.
A Singularity container image is archived in a plain file that can be stored in shared file system and accessed by many computing nodes managed by a batch scheduler.
Singularity images are created using a Singularityfile in similar manner to Docker,
though using a different syntax.
Bootstrap: docker
From: debian:wheezy
%environment
export PATH=$PATH:/usr/games/
%labels
AUTHOR <your name>
%post
apt-get update && apt-get install -y locales-all curl cowsay
curl -sSL https://github.com/COMBINE-lab/salmon/releases/download/v0.8.2/Salmon-0.8.2_linux_x86_64.tar.gz | tar xz \
&& mv /Salmon-*/bin/* /usr/bin/ \
&& mv /Salmon-*/lib/* /usr/lib/
Once you have save the Singularity file. Create the image with these commands:
singularity create my-image.img
sudo singularity bootstrap my-image.img Singularityfile
Singularity requires two commands to build an image, the creates the file image and allocate the required space on the storage. The second build the real container image.
Note: the bootstrap command requires sudo permissions.
Once done, you can run your container with the following command
singularity exec my-image.img cowsay Hello Singularity
By using the shell command you can enter in the container in interactive mode.
For example:
singularity shell my-image.img
An easier way to create Singularity container without requiring sudo permission and bootsting the containers interoperability is to import a Docker image container pulling it directly from a Docker registry. For example:
singularity pull docker://debian:wheezy
The above command automatically download the Debian Docker image and converts it to
a Singularity image store in the current directory with the name debian-wheezy.img.
Nextflow allows the transparent usage of Singularity containers as easy as with Docker ones.
It only requires to enable the use of Singularity engine in place of Docker in the Nextflow configuration file.
To run your previous script with Singularity add the following profile
in the nextflow.config file in the $HOME/hack17-course directory:
profiles {
foo {
process.container = 'docker://nextflow/rnaseq-nf'
singularity.enabled = true
singularity.cacheDir = "$PWD"
}
}
The above configuration instructs nextflow to use Singularity engine to run your script processes. The container is pulled from the Docker registry and cached in the current directory to be used for further runs.
Try to run the script as shown below:
nextflow run script7.nf -profile foo
Note: Nextflow will pull the container image automatically, it will require a few seconds depending the network connection speed.