solowand_unilever must have been installed in the home directory
########
cd ~
git clone https://github.com/ccrisan/streameye
cd ~/streameye
make
sudo make install
cd ~
########
to get the appropriate demo programs to run,
you can edit the Makefile to set the -D to DEMO, TEST, or nothing for
production which isn't done at this time
sudo cp solo*.service /lib/systemd/system
cd /lib/systemd/system
sudo systemctl daemon-reload
sudo systemctl enable soloeye.service
sudo systemctl daemon-reload
#and either solowand.service for the real wand or
sudo systemctl enable solowand.service
or this for the simulated wand
sudo systemctl enable solosim.service
and then reboot to test. it should be 10 seconds after boot before streameye
shows up in the ps -A list. wand should be there as soon as you can run ps -A