This is my current HTPC setup. It runs on k3s - a lightweight and easy to install Kubernetes distribution. It includes the following applications:
Applications state (settings / db) and media files are stored in a shared volume of type hostPath
. It does not use PVC and currently only works if the whole htpc
namespace is deployed in the same node.
# for x86_64
kubectl apply -f https://raw.githubusercontent.com/ericgoedtel/htk8s/v0.1/install_x86_64.yaml
# for raspberry pi (ARM)
kubectl apply -f https://raw.githubusercontent.com/ericgoedtel/htk8s/v0.1/install_armhf.yaml
# x86_64 only
kubectl apply -f https://raw.githubusercontent.com/ericgoedtel/htk8s/v0.1/install_argocd.yaml
This alternate manifest will install Argo CD along with the htpc application. Then it will monitor this repo for changes and apply them to the cluster accordingly (more specifically the overlays/x86
overlay).
You can access the Argo CD ui at: https://localhost/argocd.
All resources are created in the htpc
namespace. So if you run:
k3s kubectl get all -n htpc
You should get something similar to:
NAME READY STATUS RESTARTS AGE
pod/bazarr-795f88c5c9-w75l7 1/1 Running 0 24h
pod/plex-6f457df664-fqbmc 1/1 Running 0 24h
pod/jackett-6bcf6cd8d6-lrh6j 1/1 Running 0 24h
pod/radarr-5c965c7678-zt8sq 1/1 Running 0 24h
pod/sonarr-b65c8956-mxng4 1/1 Running 0 24h
pod/transmission-5f7fdc6cb5-nrtbb 1/1 Running 0 24h
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/bazarr ClusterIP 10.43.43.224 <none> 6767/TCP 24h
service/plex ClusterIP 10.43.212.198 <none> 32400/TCP 24h
service/jackett ClusterIP 10.43.104.233 <none> 9117/TCP 24h
service/radarr ClusterIP 10.43.141.101 <none> 7878/TCP 24h
service/sonarr ClusterIP 10.43.35.98 <none> 8989/TCP 24h
service/transmission ClusterIP 10.43.184.198 <none> 9091/TCP 24h
NAME READY UP-TO-DATE AVAILABLE AGE
deployment.apps/bazarr 1/1 1 1 24h
deployment.apps/plex 1/1 1 1 24h
deployment.apps/jackett 1/1 1 1 24h
deployment.apps/radarr 1/1 1 1 24h
deployment.apps/sonarr 1/1 1 1 24h
deployment.apps/transmission 1/1 1 1 24h
NAME DESIRED CURRENT READY AGE
replicaset.apps/bazarr-795f88c5c9 1 1 1 24h
replicaset.apps/plex-6f457df664 1 1 1 24h
replicaset.apps/jackett-6bcf6cd8d6 1 1 1 24h
replicaset.apps/radarr-5c965c7678 1 1 1 24h
replicaset.apps/sonarr-b65c8956 1 1 1 24h
replicaset.apps/transmission-5f7fdc6cb5 1 1 1 24h
You should also be able to reach each component's ui using the links below. Don't forget to replace localhost
by the IP or the server name running k3s.
App | URI |
---|---|
radarr | http://localhost/radarr |
sonarr | http://localhost/sonarr |
bazarr | http://localhost/bazarr |
jacket | http://localhost/jackett |
transmission | http://localhost/transmission |
plex | http://localhost/ |
Check the ingress.yaml for more details.
Each module except for Plex is configured to respond on a custom basepath (check the init containers logic for more details).
It uses LinuxServers images.
It uses a hostPath
volume to store configuration and media files. It defaults to the /opt/htpc
directory
/opt/htpc
├── bazarr
├── downloads
├── plex
├── jackett
├── media
│ ├── movies
│ └── tv
├── radarr
├── sonarr
└── transmission