This code is forked from @wene fork of original code from @witnessmenow
A network connected clock that displays time using falling tetris blocks
- Private access settings like WiFi SSID and password are contained in a
secrets.h
file that is not included in this repo. Instead you'll find the filesecrets_template.h
, which should be copied tosecrets.h
and then edited to supply the right access credentials and configuration values to match your deployment environment. - See config.h for parameter configuration
- MCU
- Tested on ESP32 boards
- Adafruit Feather Huzzah ESP32
- Tested on ESP32 boards
- WiFi
- Supported hardware
- ESP32 based boards
- Supported hardware
- Screen
- RGB LED Matrix 64 x 32
- HUB75 connectors (standard)
- LED Matrix featherboard
- RGB LED Matrix 64 x 32
- Power Supply
- 5V, ?A power supply required to properly drive the LED Matrix
- The breakout board handles pin and power cabling, and the underlying pinouts are described in config.h
- See GitHub Issues for project
- move NTP time code from customized library to standard ESP32 time.h