ericklein/air_quality

Issues

• Text wrapping for screen display

  #68 opened 8 months ago by ericklein
  1

• why are new LC709203Fs not working with existing code?

  #96 opened 9 months ago by ericklein
  0

• does magtag have voltage monitor on gpi04?

  #94 opened 9 months ago by ericklein
  1

• what epd pins are pre-defined in the magtag board definition

  #95 opened 9 months ago by ericklein
  1

• batteryRead doesn't set hardwareData.battery to 0 if hardware not detected

  #103 opened 9 months ago by ericklein
  1

• low power warning during initialization phase

  #78 opened 2 years ago by ericklein
  1

• Add thermistor support to LC709203F code`

  #114 opened 9 months ago by ericklein
  0

• Disabling DEBUG should not require commenting code

  #113 opened 9 months ago by ericklein
  0

• Reported temp/humidity #s seem suspect

  #101 opened 10 months ago by ericklein
  1

• 5 bar WiFi display crosses UI border line

  #91 opened 10 months ago by ericklein
  1

• Display charging icon when attached to USB cable

  #105 opened a year ago by ericklein
  1

• move private elements of MQTT, influx data structure from config.h to secrets.h

  #77 opened 10 months ago by ericklein
  2

• Log battery temperature on all AQ units

  #111 opened a year ago by ericklein
  0

• Display low power warning in battery gauge

  #106 opened a year ago by ericklein
  0

• Battery display shows board default voltage when no battery attached and USB power

  #71 opened a year ago by ericklein
  3

• Display OWM PM25 value on screen

  #87 opened a year ago by ericklein
  1

• #define support for non SCD40 hardware

  #99 opened a year ago by ericklein
  1

• Use conditional defines in config.h for SCREEN variables

  #100 opened a year ago by ericklein
  2

• ifndef SCREEN, code does not compile

  #97 opened a year ago by ericklein
  1

• battery is lasting less than seven days vs. almost a month

  #104 opened a year ago by ericklein
  0

• rebuild readme.md

  #92 opened a year ago by ericklein
  1

• deploy unit outside for seven days to explore CO2 reading accuracy

  #98 opened a year ago by ericklein
  0

• Handle error condition for RJ45 and retrieving RSSI value

  #70 opened 2 years ago by ericklein
  1

• aq_network.httpGETRequest() error handling insufficient

  #57 opened a year ago by ericklein
  2

• Add spark lines to display CO2 history

  #72 opened a year ago by ericklein
  2

• Display sample interval so users know what delta values mean

  #48 opened 2 years ago by ericklein
  1

• when environment sensor is restored, screen still says it is not working

  #51 opened 2 years ago by ericklein
  3

• update time displayed is 1 hour off

  #80 opened a year ago by ericklein
  2

• Move AQI rating from European to US standard

  #86 opened a year ago by ericklein
  2

• Replace batteryVoltageAvailable with actual value test

  #89 opened a year ago by ericklein
  3

• Do/should the screenHelperXXX functions all use the same yBottomMargin?

  #90 opened a year ago by ericklein
  3

• Add initial XY coordinates to screen helper routines

  #88 opened a year ago by ericklein
  1

• pm25 might have better network.begin()

  #82 opened a year ago by ericklein
  1

• AQnetwork.begin() returns T/F even though result is stored in global

  #84 opened a year ago by ericklein
  1

• Change WiFi reconnect time to <10 seconds

  #81 opened a year ago by ericklein
  1

• const [datatype] vs. #define

  #83 opened a year ago by ericklein
  1

• 5x sample CO2

  #73 opened 2 years ago by ericklein
  1

• Use IP address to generate geolocation

  #79 opened 2 years ago by ericklein
  0

• Implement partial epd refresh via alternate epd library

  #76 opened 2 years ago by ericklein
  1

• OTA Firmware update support

  #75 opened 2 years ago by ericklein
  0

• WiFi Manager support

  #74 opened 2 years ago by ericklein
  0

• Move CO2 bands to config.h parameters

  #62 opened 2 years ago by ericklein
  1

• Battery monitoring for non-LC709203

  #69 opened 2 years ago by ericklein
  1

• Temp, humidity delta is reporting <1 changes as 1 in infoScreen

  #63 opened 2 years ago by ericklein
  1

• Screen not updating for many hours at a time

  #65 opened 2 years ago by ericklein
  0

• Log RSSI to data sources

  #60 opened 2 years ago by ericklein
  2

• Add a routine to clear nv storage

  #49 opened 2 years ago by ericklein
  1

• internalTemp is never set to 10000 although code has checks for it

  #50 opened 2 years ago by ericklein
  1

• SAMPLE_SIZE 1 breaks averaging logic

  #54 opened 2 years ago by ericklein
  5

• co2 not publishing to MQTT

  #55 opened 2 years ago by ericklein
  1