Pinned Repositories
atmega328p-ip
IP (icmp/tcp/udp) support on an atmega328p (or any other AVR with hardware SPI support) and a Microchip enc28j60
attiny85_1
Firmware for the attiny85, version 1, with 1 input/counter and no outputs, outputs are hardwired to i2c command reception and input trigger
enigma2-plugin-extensions-lcd4linux-ihad-source-copy
Copy of the python source files inside the ipk on the i-have-a-dreambox website.
enigma2-plugin-systemplugins-transcoding-setup
enigma2-plugin-systemplugins-transcoding-setup
esp8266-universal-io-bridge
Universal I/O bridge for the ESP8266, including GPIO, I2C and UART (serial bridge)
lwip-for-esp8266-nonos-sdk
LWIP from the original LWIP source repository, with minimal patching to get it working on the ESP8266.
satip-client
SAT>IP Client FORK from: https://code.google.com/p/satip
secollect
Simple collector for inverter and opmtisier data from SolardEdge HD Wave devices over RS485
streamproxy
This stream proxy can replace the streamproxy, transtreamproxy and filestreamproxy on VU+ receiver. Care has been taken to always fetch all bufferend data, so the transcoding engine won't crash.
usitwislave
Software TWI/I2C implementation for ATtiny devices using USI.
eriksl's Repositories
eriksl/esp8266-universal-io-bridge
Universal I/O bridge for the ESP8266, including GPIO, I2C and UART (serial bridge)
eriksl/usitwislave
Software TWI/I2C implementation for ATtiny devices using USI.
eriksl/atmega328p-ip
IP (icmp/tcp/udp) support on an atmega328p (or any other AVR with hardware SPI support) and a Microchip enc28j60
eriksl/streamproxy
This stream proxy can replace the streamproxy, transtreamproxy and filestreamproxy on VU+ receiver. Care has been taken to always fetch all bufferend data, so the transcoding engine won't crash.
eriksl/satip-client
SAT>IP Client FORK from: https://code.google.com/p/satip
eriksl/enigma2-plugin-systemplugins-transcoding-setup
enigma2-plugin-systemplugins-transcoding-setup
eriksl/enigma2-plugin-extensions-lcd4linux-ihad-source-copy
Copy of the python source files inside the ipk on the i-have-a-dreambox website.
eriksl/lwip-for-esp8266-nonos-sdk
LWIP from the original LWIP source repository, with minimal patching to get it working on the ESP8266.
eriksl/secollect
Simple collector for inverter and opmtisier data from SolardEdge HD Wave devices over RS485
eriksl/attiny85_1
Firmware for the attiny85, version 1, with 1 input/counter and no outputs, outputs are hardwired to i2c command reception and input trigger
eriksl/attiny861_1
eriksl/attiny861_3
attiny861a used as usb device with V-USB soft-usb-implementation
eriksl/esp32
Collected firmwares for new esp32 projects
eriksl/minisatip
Minisatip forked from catalinii
eriksl/attiny861_0
Firmware for the attiny861, version 0, with 2 input/counters, 4 outputs and 1 adc input.
eriksl/attiny861_1_usb
Fork of attiny861_1 with usb (v-usb) instead of twi.
eriksl/attiny861_2
eriksl/crosstool-NG
eriksl/e32if
Host-side interface for ESP32 SoC's running my firmware.
eriksl/emd
Erik Music Daemon
eriksl/esp-open-sdk
Free and open (as much as possible) integrated SDK for ESP8266 chips
eriksl/ESP8266_new_pwm
This is a drop-in replacement for the ESP8266 SDK PWM
eriksl/ESP8266_NONOS_SDK
ESP8266 nonOS SDK
eriksl/espif
Tool to interact with ESP8266 microcontrollers running esp8266-universal-io-bridge.
eriksl/iocd
Reworked iod for more types of devices
eriksl/libespif
Library + executable for connecting to atmega328p over esp8266 (tcp)
eriksl/messagedaemon
Message daemon
eriksl/meta-formuler
BSP meta layer for Openpli
eriksl/Shelly-IF
Perl module interface to Shelly plug and plus-plug devices (currently supported: Plug-S, Plus-Plug-S, Plus-Plug-PM-mini
eriksl/Tado-IF
Perl interface to Tado cloud, obtain some real-time data from your Tado heating system.