Use at your own risk!
It has been tested with:
- TP-Link TL-WDR3600 v1 (Firmware 130909 and 150518)
- TP-Link TL-WDR4300 v1 (Firmware 150518)
- TP-Link TL-WR1043ND v1 (Firmware 140319)
- TP-Link TL-WR1043ND v2 (Firmware 150717)
The following packages have to be installed on the system:
apt-get install python-requests
pip install requests
TP-Link routers with stock firmware usually have the IP address 192.168.0.1/24.
Ensure your interface has one address in this network.
Assuming your interface is eth0 then you run on Linux as root:
ip addr add 192.168.0.2/24 dev eth0
Copy the config.yml.default to config.yml and adapt it to your needs.
Then start the autoflasher with:
./autoflash
This project is licensed under the terms of the AGPL license.