eryjus/16bcfs

Issues

• Get the emulator working properly with this new reset circuit

  #186 opened 4 months ago by eryjus
  0

• The Emulator needs proper circuit reset routines

  #190 opened 5 months ago by eryjus
  0

• Separate out the reset functions to slots

  #189 opened 5 months ago by eryjus
  0

• Video-0109

  #182 opened 5 months ago by eryjus
  0

• Name each IC and decorate each input with the name of the output driving the signal in the Reset Module

  #188 opened 5 months ago by eryjus
  0

• U7B needs reset/set tied high, not low

  #187 opened 5 months ago by eryjus
  0

• Complete the rename of ~{RHLD} to ~{CPYHLD}

  #185 opened 5 months ago by eryjus
  0

• Write the 74HC123 into the emulator, using a scheduled trigger (50ms delay)

  #184 opened 5 months ago by eryjus
  0

• Update the connections of the 74HC123 in the schematic to use reset

  #183 opened 5 months ago by eryjus
  0

• Video-0115 (Control Logic Control Revisit)

  #175 opened 7 months ago by eryjus
  0

• The DONE D-Latch might have the signals named backwards

  #181 opened 5 months ago by eryjus
  0

• Control Logic Control: Rename #RHLD to #CPYHLD

  #179 opened 5 months ago by eryjus
  0

• Clean up the bodged signal on the PCB

  #180 opened 5 months ago by eryjus
  0

• Video-0108

  #176 opened 7 months ago by eryjus
  0

• Pin alignment for the Control ROM Control Module

  #177 opened 6 months ago by eryjus
  0

• Video-0104

  #170 opened 7 months ago by eryjus
  0

• Power Capacitors are too close on the Control Logic Mid-Plane

  #174 opened 7 months ago by eryjus
  0

• Control ROM Mid-Plane has a silkscreen error

  #173 opened 7 months ago by eryjus
  0

• Video-0101 TODO

  #150 opened 9 months ago by eryjus
  0

• Emulator Clock tick is too linear

  #162 opened 7 months ago by eryjus
  0

• Take a harder look at the emulator clock

  #166 opened 7 months ago by eryjus
  0

• Control ROM Control Module LED removal

  #171 opened 7 months ago by eryjus
  0

• Control ROM Module silkscreen

  #172 opened 7 months ago by eryjus
  0

• Video-0103

  #163 opened 7 months ago by eryjus
  0

• In single step mode, the Fetch Register does not remain 1-clock behind the PC in the test rig

  #156 opened 7 months ago by eryjus
  0

• Emulate the R1 and R2 Registers completely

  #167 opened 7 months ago by eryjus
  0

• Revisit the LED Line Driver for the Control ROM Module in the Emulator

  #154 opened 7 months ago by eryjus
  0

• Emulate Program ROM

  #164 opened 7 months ago by eryjus
  0

• GP-Register needs to have an updated schematic and PCB design

  #165 opened 7 months ago by eryjus
  0

• Video-0102

  #159 opened 9 months ago by eryjus
  0

• Use Precompiled Headers for the emulator

  #155 opened 9 months ago by eryjus
  0

• Create the Instruction Register PCB Design

  #161 opened 9 months ago by eryjus
  0

• Create the Instruction Register Schematic

  #160 opened 9 months ago by eryjus
  0

• Create the Schematic for the Fetch Register

  #151 opened 9 months ago by eryjus
  0

• Create the PCB Design for the Fetch Register

  #152 opened 9 months ago by eryjus
  0

• Fetch Register Pull-Down Resistors are located incorrectly

  #158 opened 9 months ago by eryjus
  0

• The Fetch Register Control LEDs need to be connected to GNDREF, not Vcc

  #157 opened 9 months ago by eryjus
  0

• Fetch Register Breadboard Update

  #153 opened 10 months ago by eryjus
  0

• Video-0100 Milestones

  #148 opened 10 months ago by eryjus
  0

• Change Assembler to be 16bcfs-specific

  #145 opened 10 months ago by eryjus
  1

• Video-0099 Plan

  #141 opened 10 months ago by eryjus
  0

• Create a Control Logic Mid-/Back-plane with demultiplexers

  #140 opened 10 months ago by eryjus
  0

• Listing no longer include opcodes

  #144 opened a year ago by eryjus
  0

• Assembler comments and architecture directives are difficult to discern

  #142 opened a year ago by eryjus
  0

• Update MAX_OPERANDS to be used for operand parsing

  #143 opened a year ago by eryjus
  0

• Reorganizing the Control ROM build

  #136 opened a year ago by eryjus
  0

• Expand Control ROMs to the full 16

  #137 opened a year ago by eryjus
  0

• De-multiplexing signals for each bus (3-, 4-, & 7-bit modules)

  #139 opened a year ago by eryjus
  0

• Build out a 74xx238 IC

  #135 opened a year ago by eryjus
  0

• Improve the Control ROM Module copy speed

  #138 opened a year ago by eryjus
  0