README
Enea LINX for Linux
See RELEASE_NOTES for the current LINX version!
1. Introduction
2. Description and Main Features
3. Licenses
4. Documentation
5. Contacts
6. Build Instructions
7. Example: Start using LINX
8. Trademarks
1. Introduction
Enea LINX is an open technology for distributed system interprocess
communication which is platform and interconnect independent, scales
well to large systems with any topology, but that still has the
performance needed for high traffic bearing components of the
system. It is based on a well known transparent message passing method
that have been used for many years in OSE family of real time operating
systems.
LINX for Linux is the Linux implementation of the Enea LINX, and includes
the LINX kernel modules, the user-space LINX API library and tools for
configuring and supervising inter-node communication using LINX.
2. Description and Main Features
The LINX kernel module implements the LINX protocol which has two
layers - the RLNH protocol and the Connection Manager protocol. The
RLNH protocol corresponds to the session layer in the OSI model and
implements IPC functions including methods to look up endpoints by
name and to supervise them to get asynchronous notifications if they
disappear. The Connection Manager layer corresponds to the transport
layer in the OSI model and implements reliable in order transmission
of arbitrarily sized messages over any media. LINX is accessed from
user land through a new address family AF_LINX and standard BSD
sockets.
The LINX API library implements the Enea LINX message passing API.
The API is based on Enea's well know OSE distributed messaging API and
contains a full set of functions for sending and receiving messages,
lookup endpoints, request notification when endpoints disappears.
Although it is possible to write LINX application using only the
socket interface published by the kernel module the powerful
abstractions provided by the LINX API makes applications much easier
to write and maintain.
LINX contains tools to create and destroy connections to other hosts
and a daemon that can be used to automatically establish connections
to a group of LINX hosts in a network. Linxcfg creates and destroys
connections to other hosts. Linxstat displays information about
LINX-connections and programs using LINX in a format similar to
netstat. Linxdisc is a daemon which can discover other LINX nodes in
a network and automatically establish LINX connections.
The LINX release contains two example programs, a benchmark
application that can be used to test performance of LINX and a simple
application demonstrating many features of LINX messaging API.
3. Licenses
The LINX for Linux source code is released under a dual BSD / GPLv2
licence.
* The LINX kernel module is OS-specific, released under GPLv2 for Linux.
* The LINX generic protocol layer is released under a BSD licence.
* The LINX library is released under BSD licence.
See the file COPYING for the GPLv2 licence.
4. Documentation
* README This file
* RELEASE_NOTES Version information, supported platform and known
limitations.
* Changelog Change history.
* index.html Index to reach all documentation.
* UsersGuide_LINX_for_Linux.html
Description and getting started information.
* MAN-pages Reference documentation of the LINX protocol, the
LINX API, and the LINX tools.
In order to read these man-pages use the command:
MANPATH=/path/to/linx/doc man <man page>
The MAN pages are also available, converted
to HTML and PDF.
* README README-files in each example directory.
5. Contacts
www.enea.com
linx@enea.com
6. Build Instructions
See the User's Guide for instructions.
In short, to build LINX API lib and tools self hosted, go to the top LINX
directory, do ./configure and then make.
$ cd /path/to/linx
$ ./configure
$ make
For cross compiling, set the PATH to include your cross development toolkit and
pass run the configure script with the --host parameter set to your target
architecture.
$ cd /path/to/linx
$ export PATH=/path/to/toolkit:$PATH
$ ./configure --host=<target architecure>
$ make
This creates the tool binaries located in the /path/to/linx/bin directory, the
LINX API libraries, the example as well as the LINX Benchmark suite.
The LINX kernel modules are built separetely.
$ cd /path/to/linx
$ cd net/linx
$ make
This creates the kernel modules linx.ko, linx_eth_cm.ko, linx_tcp_cm.ko,
linx_rio_cm.ko, linx_shm_cm.ko and linx_cmcl.ko (located in
/path/to/linx/net/linx/).
For cross compiling, fist set a few environment variables or update
config.mk and set the PATH to include your cross development toolkit:
* ARCH - target architecture, e.g. ppc
* CROSS_COMPILE - cross tools prefix, e.g. powerpc-linux-
* KERNEL - kernel source tree
6.1 Kernel bug workarounds
In order to workaround specific kernel bugs, a set of defines are
available to patch the LINX code. The workarounds are enabled by defining
build time variables.
* LINX_KERNEL_WORKAROUND_1 Vanilla kernels earlier than 2.6.12 have a
bug in the rwsemaphore handling. The problem
is that irqs are not enabled and disabled
correctly when using the rwsem interface.
When LINX_KERNEL_WORKAROUND_1 is defined,
extra irq handling is added. Many distributions,
such as Red hat, Centos etc. have patches
that fix this problem.
$ make LINX_KERNEL_WORKAROUND_1=yes
7. Example: Start using LINX
See the User's Guide how to start using LINX.
Below is a very short summary how to install, build and start using LINX
on two Linux hosts; HostA and HostB. Note that to be able to build the LINX
kernel module, headers matching the running kernel must be installed.
On HostA untar the LINX archive in some suitable place:
$ tar xzf linx-ver.tar.gz
Go to the linx directory, build LINX API lib and tools:
$ cd /path/to/linx
$ ./configure
$ make
$ export PATH=${PATH}:/path/to/linx/bin
Go to the linx kernel modules directory, build the kernel modules:
$ cd /path/to/linx/net/linx
$ make
Load the LINX kernel module into your kernel. Note that you need root
permission to install the kernel module.
$ cd /path/to/linx
$ sudo insmod net/linx/linx.ko
Insert the Ethernet CM:
$ sudo insmod net/linx/linx_eth_cm.ko
Create a connection to the remote system B
$ mkethcon -i eth0 -m 0b:0b:0b:0b:0b:0b econ_b
$ mklink -c ethcm/econ_b elink_b
Do the same on host B, unpack, build, and install kernel module. Finally
create a connection to A:
$ mkethcon -i eth0 -m 0a:0a:0a:0a:0a:0a econ_a
$ mklink -c ethcm/econ_a elink_a
Now applications can send messages over the link.
To use the TCP CM, insert the corresponding CM kernel module:
$ sudo insmod net/linx/linx_tcp_cm.ko
Notice that many CMs can coexist at the same time.
On host A create a connection to the remote host:
$ mktcpcon -i 192.168.1.B tcon_b
$ mklink -c tcpcm/tcon_b tlink_b
Do the same on host B:
$ mktcpcon -i 192.168.1.A tcon_a
$ mklink -c tcpcm/tcon_a tlink_a
The applications can use the link.
The current available links can be seen with the linxstat command:
$ linxstat
8. Trademarks
LINX, OSE, OSEck are registered trademarks of Enea Software AB.
Linux is a registered trademark of Linus Torvalds.
PowerPC is a registered trademark of IBM Corporation.
i386 is a registered trademark of Intel Corporation.
All other trademarks, trade names or copyrights used
in files in the LINX distribution are the property
of their respective owners and are used for identification
purposes only.