SolarEdge Prometheus Exporter

Having just installed a SolarEdge inverter and not happy with the 15 minute delay and low resolution of the monitoring data provided by the monitoring service/api, I created this exporter to connects directly to SolarEdge inverter over ModBus TCP to export (near) real time data to Prometheus.

Status

The code could use some clean up but I have had it running for a weeks scraping data from the inverter every 5 seconds without any issues.

Requirements

SolarEdge Inverter that supports SunSpec protocol (Tested with SE5000 w. CPU version 3.2221.0)
ModBus TCP Enabled on the inverter
Local network connection to the inverter (No ZigBee/GSM support)

Modbus TCP is a local network connection only and does not interfere or replace your connection to the SolarEdge monitoring service. As per the SolarEdge documentation, the two monitoring methods can be used in parallel without impacting each other.

More information on how to enable ModBus TCP can be found in the SolarEdge Documentation here

TODO

Implement consumption meter output.
- This may already be working however my consumption meter is not installed yet so I cannot test

Quick Start

Download the binary from the Releases section for your platform
Configure the exporter using one of the two methods available.

Replace the IP address in these samples with the address of your inverter
- Environment Variables:
```
	INVERTER_ADDRESS=192.168.1.189
	EXPORTER_INTERVAL=5
	INVERTER_PORT=502
```
- config.yaml: Create a config file named config.yaml in the same location that you downloaded the executable with the following contents:
```
SolarEdge:
  InverterAddress: "192.168.1.189"
  InverterPort: 502
Exporter:
  # Update Interval in seconds
  Interval: 5	
```
Add the target to your prometheus server with port 2112

Metrics

Metric	Type	Description/Help
SunSpec_DID	Guage	101 = single phase 102 = split phase1 103 = three phase
SunSpec_Length	Guage	Registers 50 = Length of model block
AC_Current	Guage	Amps AC Total Current value
AC_CurrentA	Guage	Amps AC Phase A Current value
AC_CurrentB	Guage	Amps AC Phase B Current value
AC_CurrentC	Guage	Amps AC Phase C Current value
AC_Current_SF	Guage	AC Current scale factor
AC_VoltageAB	Guage	Volts AC Voltage Phase AB value
AC_VoltageBC	Guage	Volts AC Voltage Phase BC value
AC_VoltageCA	Guage	Volts AC Voltage Phase CA value
AC_VoltageAN	Guage	Volts AC Voltage Phase A to N value
AC_VoltageBN	Guage	Volts AC Voltage Phase B to N value
AC_VoltageCN	Guage	Volts AC Voltage Phase C to N value
AC_Voltage_SF	Guage	AC Voltage scale factor
AC_Power	Guage	Watts AC Power value
AC_Power_SF	Guage	AC Power scale factor
AC_Frequency	Guage	Hertz AC Frequency value
AC_Frequency_SF	Guage	Scale factor
AC_VA	Guage	VA Apparent Power
AC_VA_SF	Guage	Scale factor
AC_VAR	Guage	VAR Reactive Power
AC_VAR_SF	Guage	Scale factor
AC_PF	Guage	% Power Factor
AC_PF_SF	Guage	Scale factor
AC_Energy_WH	Guage	WattHours AC Lifetime Energy production
AC_Energy_WH_SF	Guage	Scale factor
DC_Current	Guage	Amps DC Current value
DC_Current_SF	Guage	Scale factor
DC_Voltage	Guage	Volts DC Voltage value
DC_Voltage_SF	Guage	Scale factor
DC_Power	Guage	Watts DC Power value
DC_Power_SF	Guage	Scale factor
Temp_Sink	Guage	Degrees C Heat Sink Temperature
Temp_SF	Guage	Scale factor
Status	Guage	Operating State
Status_Vendor	Guage	Vendor-defined operating state and error codes. For error description, meaning and troubleshooting, refer to the SolarEdge Installation Guide.