esp-arduino-libs/ESP32_Display_Panel

Issues

• Library compiles with errors if ST7796 is selected

  #134 opened a month ago by joelccrouch
  11

• 使用ESP-IDF配置ST7701后编译报错

  #133 opened a month ago by Cathgao
  9

• JC8048W550C 800x480 support

  #132 opened a month ago by lsroka76
  1

• Backlight control requirements

  #131 opened a month ago by Y1hsiaochunnn
  3

• A couple of code errors in ESP_PanellLcd.cpp

  #130 opened 2 months ago by mhavill
  2

• 立创实战派esp32s3 在arduino ide上使用此库自带的lvgl历程时,程序运行但屏幕无法显示,请大佬帮帮忙

  #129 opened 2 months ago by chunyu-just
  3

• request add waveshare ESP32-S3-LCD-1.47

  #122 opened 2 months ago by springeye
  11

• please close.

  #127 opened 2 months ago by t19j79
  1

• How to disable some debug messages?

  #126 opened 2 months ago by zizheng1
  1

• example using eez studio or squareline

  #121 opened 2 months ago by fdaforno
  2

• LVGL v9 support

  #63 opened 7 months ago by isthaison
  5

• ESP-IDF Support

  #39 opened 2 months ago by VoytkoValera
  1

• I couldn't create a simple button on the screen

  #116 opened 3 months ago by CoTECH1987
  2

• Waveshare round 1.85 ESP32S3 LCD : failure to initialise touch

  #113 opened 3 months ago by martinroger
  10

• What does the Panel test look like on the screen?

  #114 opened 3 months ago by CoTECH1987
  6

• lib/ESP32_Display_Panel/src/backlight/ESP_PanelBacklight.cpp:18:92: error: no matching function for call to 'ledc_timer_config_t::ledc_timer_config_t(<brace-enclosed initializer list>)'

  #107 opened 4 months ago by hgwc
  20

• DrawBitmap crashing if logging not enabled

  #112 opened 3 months ago by NecroMancer05
  2

• Error: Invalid Height

  #111 opened 4 months ago by YOTOTOY
  4

• 404 - Page Not Found - ESP32_Display_Panel/examples /README.md/

  #109 opened 4 months ago by mrmonteith
  1

• Can I use this library with axs15231b directly?

  #108 opened 4 months ago by HerbertHe
  4

• Panel fails to initialise

  #106 opened 5 months ago by sjgcornish
  1

• LVGL (version 8) and SQLite3

  #103 opened 5 months ago by jerryliugithub
  7

• Examples of using simple drawing libraries

  #105 opened 5 months ago by bajacondor
  5

• How to extend display to entire screen on an 800x480 screen

  #95 opened 5 months ago by lboue
  3

• Support st77903 controller.

  #94 opened 5 months ago by DenisMartsenyuk
  5

• error: no matching function for call to 'construct_at(ESP_PanelTouch_GT911*&, ESP_PanelBus*, esp_lcd_touch_config_t&, int)'

  #85 opened 5 months ago by lboue
  2

• `LCD Venbdor` typo

  #92 opened 5 months ago by lboue
  0

• EXAMPLE_TOUCH_ADDRESS missing as variable.

  #83 opened 5 months ago by lboue
  1

• 'LVGL_PORT_ROTATION_DEGREE' was not declared in this scope

  #74 opened 5 months ago by lboue
  4

• WiFiClock example: Poor graphics quality

  #87 opened 5 months ago by lboue
  7

• Dependency missing in `library.properties` file

  #90 opened 5 months ago by lboue
  3

• ESP_Panel.cpp:44:49: error: 'ESP_PanelLcd_EK9716BD3' was not declared in this scope; did you mean 'ESP_PanelLcd_ST77916'?

  #77 opened 5 months ago by lboue
  1

• 在esp32s3上运行例程3WireSPI_RGB，串口监视器显示no mem for frame buffer

  #88 opened 6 months ago by Freeloop2333
  1

• Unable to light up the screen while running wifi clock

  #72 opened 6 months ago by FLoutione
  12

• ESP_PANEL_LCD_RGB_IO_DATAx pins mapping to display RGB pins

  #58 opened 6 months ago by wavejaco
  3

• LCD RGB Element Order different between examples

  #68 opened 6 months ago by lboue
  4

• No Touchscreen + expander: Compilation error

  #65 opened 6 months ago by rolloo
  3

• LCD Display and Touch Only Work If "RESET" is Pressed During Power Up and Serial Monitor is Opened

  #64 opened 7 months ago by zyan003
  13

• How to get the source code for ST7262 ?

  #62 opened 7 months ago by eagl1
  1

• Arduino RGB example error for ESP32 S3 to run ST7262 display

  #52 opened 7 months ago by eagl1
  13

• The Arduino RGB example of the ESP32 S3 running the ST7262 display has a dotted line on the far right

  #60 opened 7 months ago by H-sw123
  2

• How to enable serial port for the Platform IO

  #61 opened 7 months ago by appleshaman
  4

• Squareline Simple Wi-Fi Clock Example: How to set hardcoded Wi-Fi credentials?

  #49 opened 7 months ago by lboue
  1

• release v0.1.4 - 2024-06-17 version

  #55 opened 7 months ago by lboue
  3

• PanelTest.ino --> Compilation error: 'ESP_Panel' does not name a type (new version, same issue)

  #57 opened 7 months ago by wavejaco
  3

• PlatformIO ini file problem

  #47 opened 7 months ago by appleshaman
  2

• Bootloop running PanelTest example on M5CORES3: E (275) FT5x06: esp_lcd_touch_new_i2c_ft5x06(161): FT5x06 init failed

  #54 opened 7 months ago by lboue
  2

• error running panel test on ESP32-4848S040C_I_Y_3

  #44 opened 7 months ago by Rujo
  4

• How to set the RGB Mode?

  #46 opened 7 months ago by jerryliugithub
  1

• Can the v9 version of the LVGL library be used?

  #43 opened 7 months ago by appleshaman
  2