espressif/esp-iot-bridge

Issues

• [ETH] eth_phy_802_3: eth_phy_802_3_pwrctl(162): power up timeout (AEGHB-704)

  #77 opened a day ago by taxidriver2022
  5

• ESP-IOT-Bridge编译失败 (AEGHB-708)

  #78 opened 8 days ago by zyq20170820
  4

• esp-iot-bridge里面工程编译一直报错 (AEGHB-684)

  #76 opened 20 days ago by yangjinyiyiyi
  7

• 使用wireless_nic遇到2个问题 (AEGHB-646)

  #74 opened 2 months ago by linhuikui
  5

• 请适配ESP-IDF 5.2 (AEGHB-635)

  #73 opened 2 months ago by linhuikui
  3

• Unable to build binary due to ip_napt_enable function (AEGHB-634)

  #72 opened 2 months ago by BenjaminDeHeisenberg
  9

• Configuration descriptor larger than control transfer max length AIR780E and ESP32-S3 with USB connection (AEGHB-88)

  #38 opened a year ago by zsy-cn
  8

• Cannot configure pin in sdkconfig because it is outside of active range (CONFIG_BRIDGE_GPIO_RANGE_MAX ) (AEGHB-590)

  #71 opened 3 months ago by mael-richard
  1

• Ethernet and WiFi on same subnet (AEGHB-151)

  #44 opened a year ago by simon4096
  4

• Host Vendor Class API (AEGHB-582)

  #70 opened 4 months ago by Docfch
  1

• Special character & (AEGHB-563)

  #68 opened 4 months ago by miccgn
  3

• Bridge (Host USB Vendor Specific to Wifi) - Multi hubs and multi devices (AEGHB-577)

  #69 opened 4 months ago by Docfch
  3

• 过几个小时再连接ap时 没有网络 (AEGHB-503)

  #62 opened 6 months ago by qq547176052
  9

• ESP PSRAM 不能使用 (AEGHB-543)

  #66 opened 5 months ago by qq547176052
  2

• Failed to build the wifi_router example (AEGHB-552)

  #67 opened 5 months ago by PabasaraDilshan
  2

• Manual patch needed to get USB bridge working (AEGHB-97)

  #39 opened a year ago by redfast00
  5

• Suggest deleting FALLBACK_DNS_SERVER (AEGHB-533)

  #65 opened 5 months ago by Kreedb
  1

• 错误和重启 (AEGHB-530)

  #64 opened 5 months ago by qq547176052
  1

• ESP32 can't act as Wi-Fi Hotspot device while connected to ethernet (AEGHB-464)

  #60 opened 7 months ago by SREERAG56
  1

• error: src/core/ipv4/ip4.c: Patch konnte nicht angewendet werden (AEGHB-332)

  #54 opened a year ago by rinstrum-franz
  4

• error: esp-netif_lwip-ppp: pppos_input_tcpip failed with -1 (AEGHB-396)

  #59 opened 9 months ago by AD-Codex
  1

• Is it possible to make the SoftAP IP range have same IP with the IP that Wi-Fi STA connected to? (AEGHB-382)

  #58 opened 10 months ago by anhnt-dev
  3

• Using the ETH interfce on the WT32-eth01 (AEGHB-200)

  #48 opened a year ago by XLapAcme
  8

• Crash wen SPIRAM is on (AEGHB-334)

  #55 opened a year ago by franz-ms-muc
  8

• esp_modem_set_mode failed (AEGHB-338)

  #56 opened a year ago by xiao-orien
  2

• Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled. (AEGHB-339)

  #57 opened a year ago by xiao-orien
  1

• BRIDGE_CUSTOM_MAX_CONNECT_NUMBER (AEGHB-330)

  #52 opened a year ago by rinstrum-franz
  3

• warning: pointer 'item' used after 'free' [-Wuse-after-free] (AEGHB-331)

  #53 opened a year ago by rinstrum-franz
  2

• After restarting WiFi_Router, it does not assign a fixed IP address to the client. (AEGHB-266)

  #50 opened a year ago by bluestar714
  2

• RNDIS support for the WiFi router example (AEGHB-126)

  #42 opened a year ago by bluestar714
  29

• Does esp32-C3 have a 4G to WiFi_AP routine? (AEGHB-195)

  #47 opened a year ago by JS-Ye
  9

• USB RNDIS Bridge memory leak (AEGHB-193)

  #46 opened a year ago by wuyuanyi135
  1

• More cellular module supports like Quectel EG25 (AEGHB-156)

  #45 opened a year ago by dumtux
  3

• Cant ping or communicate with devices attached to Bridge (AEGHB-144)

  #43 opened a year ago by BitBricker
  8

• esp_pbuf_allocate not found (AEGHB-124)

  #41 opened a year ago by gussstav
  4

• DHCP server on USB interface (AEGHB-112)

  #40 opened a year ago by redfast00
  2

• Packet jam occurs on Quectel EC25 and ESP32-S3 with USB connection. (AEGHB-48)

  #34 opened a year ago by jitenshap
  5

• esp_modem_recov_helper.h: No such file or directory (AEGHB-45)

  #33 opened a year ago by timschr
  1

• [Tracking issue] USB to ethernet bridge for mesh-lite network (AEGHB-85)

  #37 opened a year ago by redfast00
  4

• About requesting source code of USB-WiFi bridge (AEGHB-80)

  #29 opened 2 years ago by wuyuanyi135
  3

• How do I change the MAC address for my WiFi station? (AEGHB-21)

  #32 opened a year ago by edbek
  1

• 4G Router using SIM7600 and ESP Wroom32

  #26 opened 2 years ago by RenjithBeginow
  25

• Is possible to access html panel of configuration?

  #27 opened 2 years ago by m5it
  1

• ESP_Mesh_Lite_Comm: Error occurred during sending: errno Not enough space

  #24 opened 2 years ago by Leadrive
  2

• Ethernet to Ethernet Bridging

  #25 opened 2 years ago by kostaond
  1

• 配置以太网，报告缺少bridge_eth.c

  #23 opened 2 years ago by Leadrive
  3

• Cannot get AT response on SIM7600

  #22 opened 2 years ago by navidkashi
  1

• 能否结合MDF中的MQTT例子？

  #21 opened 2 years ago by Leadrive
  6

• 请教一下，如何进行Mesh-Lite测试？

  #20 opened 2 years ago by Leadrive
  4

• Failed to resolve component 'qrcode'

  #19 opened 2 years ago by Leadrive
  2