Yet another MacroPad but remotely configurable/scriptable/executable over Wi-Fi.
Most importantly, it uses much cheaper solutions than the other existing ones.
![]() |
![]() |
---|---|
![]() |
![]() |
There's 2 parts you can print
- Body: The stand or case whatever you call it, shown in the picture above.
- Spacer: To align the keys while soldering. This is optional.
3D Printing Parts (STL/AMF/FreeCAD)
It's recommended to place 4 Silicone Rubber Feet with diameter of 10mm underneath the body to prevent slipping.
http://macropad.local/
The web interface is a Vue.js application.
See /web for more information.
Method | URL | Description | Done |
---|---|---|---|
GET |
/api/config |
read config | ✅ |
POST |
/api/config |
write config | ✅ |
DELETE |
/api/config |
delete config | ✅ |
GET |
/api/restart |
restart | ✅ |
GET |
/api/reset |
earase all settings | ✅ |
TODO: Add more information about development.
Clone this project
git clone git@github.com:RayPS/MacroPad.git
Open this project in PlatformIO
Update upload_port
Update monitor_port
(optional, if you want to see debug messages from SoftwareSerial, otherwise remove this option)
Finally, upload to the board.
cd MacroPad/web
yarn install
yarn run dev
to start web development or yarn run build
to build the html PROGMEM for the firmware.
(After yarn run build
, you can perform an upload in PlatformIO again)
Syntax | Feature | Done |
---|---|---|
# This is a comment @ CTRL SHIFT CMD F1 $ Hello world! ! 1200 ~ 50 + WIN R - WIN R . |
comment shortcut string wait (ms) interval (ms) press key release key release all keys |
✅ ✅ ✅ ✅ ❌ ✅ ✅ ✅ |
- Hardware
- PCB
- Use USB-C instead of Micro USB 😅
- 3D Prints
- Design the top case
- Printable potentiometer cap, maybe
- PCB
- Software
- Firmware
- Decide the functionality for the potentiometer
- Fix the SW0 (IO9) crash
- Implementation of ~Interval, don't see any use case yet
- Web Interface
- Add a "usage/reference" page
- Syntax highlighting. is this necessary?
- Config saving guard (macro syntax validation)
- Firmware
Features Roadmap:
- Remote execution (Already done but wont add to current version)
- Multi-configs