etattershall/internet-of-thingies

Issues

• WP1 Hardware: [SHOULD] Install OpenWrt on wireless hub (https://openwrt.org/)

  #3 opened 8 years ago by etattershall
  1

• Identification of edge devices and smart agents

  #20 opened 7 years ago by etattershall
  1

• WP2 Software: [MUST] Getting edge devices to connect to each other via a hub

  #7 opened 7 years ago by etattershall
  1

• Buffering

  #19 opened 7 years ago by etattershall
  1

• WP2 Fundamentals: [COULD] Implement IoT protocols, MQTT

  #10 opened 7 years ago by etattershall
  0

• WP2 Fundamentals: [MUST] Discovery – edge device can discover other edge devices, or hub, or both

  #9 opened 8 years ago by etattershall
  0

• WP2 Fundamentals: [MUST] How a device identifies itself to the fog/cloud, how it registers and obtains a key, if necessary

  #8 opened 8 years ago by etattershall
  2

• WP3 Dissemination [MUST]

  #14 opened 8 years ago by etattershall
  0

• WP4 Learning & Development [MUST]

  #15 opened 8 years ago by etattershall
  0

• WP2 Software: [MUST] Getting edge/fog devices to communicate in a peer to peer fashion, using Bluetooth and/or wireless

  #6 opened 8 years ago by etattershall
  2

• WP2 Application: [SHOULD] Explore implementing an "app" across fog/cloud, or fog alone

  #12 opened 8 years ago by etattershall
  1

• WP2 Simulation: [SHOULD] Explore ML to detect "anomalous" behaviour in the fog

  #13 opened 8 years ago by etattershall
  0

• WP2 Fundamentals: [COULD] Implement peer-selection

  #11 opened 8 years ago by etattershall
  0

• March: Put operating systems on Raspberry Pis

  #1 opened 8 years ago by etattershall
  2

• Wifi shield functionality limited unless Arduino IDE 1.02 or earlier is used

  #2 opened 8 years ago by etattershall
  1