fabiansch/esep_sortingmachine

Issues

• print Item type with name like in RDD

  #124 opened 7 years ago
  0

• update item statemachine vpp with Sorting and TypeIdentification

  #123 opened 7 years ago
  0

• synchronizing Sorting module when wished items get lost

  #122 opened 7 years ago
  0

• throw error when sorting out and slide full

  #121 opened 7 years ago
  0

• after all E_STOPPs are pulled -> pushing START should not be necessary

  #120 opened 7 years ago
  0

• item wird nach timeframe_input_leave nicht geloescht?!

  #119 opened 7 years ago
  0

• print erros when RESET pushed, blink fast if item lost

  #118 opened 7 years ago
  0

• hoehe 1 wird nicht uebergeben auf bands 2

  #117 opened 7 years ago
  0

• bugfix reestanlish green light status when NO_ERROR

  #116 opened 7 years ago
  0

• SensorTest machine 2 says test failed when it was actually not failing

  #115 opened 7 years ago
  0

• fix warnings during compilation of Timer

  #114 opened 7 years ago
  0

• statemachine ErrorHandler

  #113 opened 7 years ago
  1

• statemachine Sorting

  #112 opened 7 years ago
  0

• statemachine profileDetection

  #111 opened 7 years ago
  0

• motor does not stop after removing last Item from output when slide_full == true

  #110 opened 7 years ago
  0

• print item on switch

  #109 opened 7 years ago
  1

• height1 to cb2

  #108 opened 7 years ago
  0

• id to cb2

  #107 opened 7 years ago
  0

• blink yellow during outsorting for 5 sec

  #106 opened 7 years ago
  0

• using timer module to close switch point

  #105 opened 7 years ago
  0

• implement hight priority for ESTOP pulses

  #104 opened 7 years ago
  0

• Systemtest

  #103 opened 7 years ago
  0

• overwrite SIGINT and SIGTERM

  #102 opened 7 years ago
  1

• adjust Error Statemachine

  #101 opened 7 years ago
  1

• print following data on console when item reaches output of machine 2

  #100 opened 7 years ago
  1

• print ItemType on console as soon as possible

  #99 opened 7 years ago
  0

• implement preference list for Sorting

  #98 opened 7 years ago
  0

• check SLIDE_TIMERS

  #97 opened 7 years ago
  0

• watchdog reconnection

  #96 opened 7 years ago
  0

• broadcast E_STOP error after serial reconnection

  #95 opened 7 years ago
  1

• check E_STOP when system starts up

  #94 opened 7 years ago
  0

• implement Calibration

  #93 opened 7 years ago
  0

• pushing e stop buttons at the same time

  #92 opened 7 years ago
  1

• conveyerbelt should stop after item was sent to next CB in SensorTest

  #91 opened 7 years ago
  0

• Menu should shutdown without memory leaks

  #90 opened 7 years ago
  1

• refactor channel (deadlocksave, shutdownsave)

  #89 opened 7 years ago
  2

• find solution for deadlock caused of channels

  #88 opened 7 years ago
  3

• implement ISR method that clears isr specific irq flags

  #87 opened 7 years ago
  0

• Bugfix SensorTest

  #86 opened 7 years ago
  1

• add test for chatter protection of SwitchPoint to automated SensorTest

  #85 opened 7 years ago
  1

• improve automated SensorTest

  #83 opened 7 years ago
  0

• final class diagramm of HardwareLayer

  #82 opened 7 years ago
  0

• document SenserTest (State Diagram)

  #81 opened 7 years ago
  0

• Item Buffer in HAL

  #79 opened 7 years ago
  1

• automatitizise sensor test

  #78 opened 7 years ago
  2

• fix sensor test in serial

  #77 opened 7 years ago
  1

• individualize chatter protection

  #76 opened 7 years ago
  1

• serial modular machen

  #75 opened 7 years ago
  1

• understand isr code

  #74 opened 7 years ago
  0

• implement parameter pattern

  #72 opened 7 years ago
  2