/BlynkyDUCO

BLYNKY DUCO is a Blynk client and a DUCO Miner at the same time.

Primary LanguageC++MIT LicenseMIT

BLYNKY DUCO

BLYNKY DUCO is a Blynk client and a DUCO Miner at the same time.

While Blynk is idle, why not earn some Cryptocurrency!

Modified from official Duino-Coin ESP8266 Code, https://github.com/revoxhere/duino-coin and BLYNK 2.0 Code, https://blynk.io/

DUCO version 3.0 BLYNK version 0.1.0 BLYNK API version 2.0

Author: Fahim Rahman, https://github.com/fahimrahmanbooom

Try this configuration for better performance before flashing.

Board: "Select your ESP8266 Board", Upload Speed: "115200", CPU Frequency: "160 MHz", Flash Size: "4MB (FS:3MB OTA:~-512KB)", Flash Mode: "DOUT", Flash Frequency: "26MHz", IwIP Variant: "V2 Higher Bandwidth", Stack Protection: "Enabled", MMU: "32KB cache + 32KB IRAM (balanced)",

HOW TO SETUP:

Step 1:

Go to https://blynk.cloud/dashboard then Device Info and copy; BLYNK_TEMPLATE_ID, BLYNK_DEVICE_NAME, BLYNK_AUTH_TOKEN then paste it below.

Step 2:

Fill up your Wifi SSID, Password, Duino-Coin username and RIG Identifier below.

Step 3:

Flash using the recommended configuration.

Step 4:

Relax and Don't forget to leave a star. Thanks :)

MIT