fairecasoimeme/ZiGate

Issues

• mise à jour impossible

  #411 opened 22 days ago by toto6976
  67

• zigate: Error reading module information - check cabling and power while upgrading firmware

  #410 opened 8 months ago by karawitan
  3

• Constant Status.NoFreeAPSAckHandles from zigpy_zigate

  #401 opened 8 months ago by Rudd-O
  5

• FW 3.23: Simple descriptor response does not show 0004/groups cluster on EP1

  #409 opened 2 years ago by tcharp38
  0

• Whats the diffrence between DeviceType cordinator and router?

  #408 opened 2 years ago by dmsherazi
  0

• Help & guidance in implementing the Tuya FE00 cluster for TS0601 devices

  #406 opened 2 years ago by dmsherazi
  5

• FW 0004-0321: 804E may return wrong info => use 8002 instead

  #407 opened 2 years ago by tcharp38
  4

• [Question] what is the diffrence between OPDM and Legacy versions?

  #404 opened 2 years ago by dmsherazi
  2

• Read Attribute Response shows zero size and unknow data type for tuya products

  #405 opened 2 years ago by dmsherazi
  1

• [Question] Is windowCovering command only available for 3.0f or also in later versions

  #403 opened 2 years ago by dmsherazi
  2

• Add Window Covering Tab and commands to ZGWUI

  #402 opened 2 years ago by dmsherazi
  1

• Pizigate mode routeur

  #399 opened 2 years ago by RudySixOw
  12

• Error: Zigate: Decode8000 Zigate v1 Usb

  #394 opened 3 years ago by blooesky
  3

• Zigate v1 upgrave de firmware

  #390 opened 3 years ago by Jake309
  18

• Message 9999, extended error 0x87

  #400 opened 2 years ago by tcharp38
  1

• Reporting doesn't work properly. Zigate filters messages.

  #398 opened 2 years ago by VOVAiS
  1

• Zigate ne répond plus

  #397 opened 2 years ago by max5962
  2

• mise à jour Pizigate impossible

  #396 opened 3 years ago by Jerome63000
  8

• Zigate not responding

  #395 opened 3 years ago by pipiche38
  0

• ZDP commande some time failing

  #389 opened 3 years ago by pipiche38
  0

• Not able to use Group Address Mode ( 0x01 ) in Raw Command 0x0530

  #383 opened 3 years ago by pipiche38
  0

• Strange documentation of Remove Device Command

  #382 opened 3 years ago by pipiche38
  0

• Not able to pair new devices while not at the limit

  #375 opened 3 years ago by pipiche38
  1

• Disable group message filtering in raw mode

  #393 opened 3 years ago by max5962
  2

• FW 3.1e -> 3.21OPDM: unexpected 804E answer from zigate

  #370 opened 3 years ago by tcharp38
  10

• In Raw Mode message cluster 0013 is filtered

  #392 opened 3 years ago by pipiche38
  0

• Zigate Controller configuration

  #391 opened 3 years ago by pipiche38
  0

• Integrate and support new Aqara Door Sensor MCCGQ14LM

  #381 opened 3 years ago by pipiche38
  6

• Discover attributes (extended) response with FW 3.1e/3.20 OPDM

  #388 opened 3 years ago by tcharp38
  2

• Mise à jour PIZIGATE impossible

  #387 opened 3 years ago by mickadam29
  17

• Doc: Cmd 0041/IEEE addr request

  #386 opened 3 years ago by tcharp38
  9

• Problème test Zigate

  #380 opened 3 years ago by misterchikite
  0

• Not an issue: any way to know current device binding ?

  #372 opened 3 years ago by tcharp38
  9

• Group Binding seems not to work

  #377 opened 3 years ago by pipiche38
  0

• Cluster 000A/Time support discussion

  #379 opened 3 years ago by tcharp38
  1

• Doc: cmd 8000 & 8012, missing nPDU/aPDU info

  #378 opened 3 years ago by tcharp38
  0

• Zigate and Home assistant is_initialized=False

  #376 opened 3 years ago by bckthomas
  4

• LQI requests (004E) may trig device re-announce

  #374 opened 3 years ago by tcharp38
  3

• Not an ZiGate Issue, but for info - Profalux do not provide Relation ship in LQI Management Response

  #355 opened 3 years ago by pipiche38
  4

• Official recommendations for FW migration

  #356 opened 3 years ago by tcharp38
  5

• Doc update: missing 0122 read configure reporting & 8122 reponse

  #373 opened 3 years ago by tcharp38
  2

• [HARDWARE REQUEST] ZiGate Ethernet Gateway (for wired networking) with or without PoE (Power over Ethernet) support

  #366 opened 3 years ago by Hedda
  3

• Doc: cmd 8000, understanding status code

  #371 opened 3 years ago by tcharp38
  0

• Mark this repository as unmaintained

  #367 opened 3 years ago by schrodingersket
  6

• Manufacturer-Specific Attribute Reporting does not work

  #364 opened 3 years ago by schrodingersket
  2

• Add Command to Query Transport Key

  #362 opened 3 years ago by schrodingersket
  7

• License

  #359 opened 3 years ago by gio-dot
  3

• Zigate wifi: partage simultanné possible ?

  #361 opened 3 years ago by tcharp38
  7

• automatic 8014 generation when network opened or closed

  #360 opened 3 years ago by tcharp38
  2

• Typo in 3.1e tag

  #357 opened 3 years ago by schrodingersket
  1