Pinned Repositories
android_kernel_xiaomi_ginkgo
Arduino
open-source electronics platform
Bigtree3DPluginSuit
Gcode model preview icon
BIGTREETECH-Relay-V1.2
BIGTREETECH Relay V1.2 is an upgrade of the original (BIGTREETECH V1.0). After upgrading, a small MCU was added on the module to make the module more controllable and stable. Besides, we have also increased short circuit detection circuit. After connecting the 5V and GND on the motherboard to the module, if there is a 5V short circuit, the module will immediately power off to prevent damage on the motherboard and the risk of fire caused by short circuit.
BIGTREETECH-SKR-mini-E3
BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
BIGTREETECH-SKR-V1.3
32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
BIGTREETECH-Stepper-Motor-Driver
BIGTREETECH-TMC2209-V1.2
TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. Its continuous drive current is 2A and peak current is 2.8A. Compared with TMC2208, the driving current of this IC is not only improved by 0.6a-0.8a, but also this IC increases the function of locked-motor test.
BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1
BIGTREETECH-TouchScreenHardware
This library contains all the open source materials of BIGTREETECH touch screen hardware.
fajnet's Repositories
fajnet/Arduino
open-source electronics platform
fajnet/Bigtree3DPluginSuit
Gcode model preview icon
fajnet/BIGTREETECH-Relay-V1.2
BIGTREETECH Relay V1.2 is an upgrade of the original (BIGTREETECH V1.0). After upgrading, a small MCU was added on the module to make the module more controllable and stable. Besides, we have also increased short circuit detection circuit. After connecting the 5V and GND on the motherboard to the module, if there is a 5V short circuit, the module will immediately power off to prevent damage on the motherboard and the risk of fire caused by short circuit.
fajnet/BIGTREETECH-SKR-mini-E3
BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
fajnet/BIGTREETECH-TouchScreenHardware
This library contains all the open source materials of BIGTREETECH touch screen hardware.
fajnet/Ender-3-nonpro-to-SW
My conversion from my Ender 3 to a Voron switchwire
fajnet/ender3_SW_grills_plates
fajnet/Ender3_switchwire_fixes
fajnet/ender3Switchwire
fajnet/Ender_SW
This is a full conversion of the popular Ender 3 Pro/V2 to a Voron Switchwire.
fajnet/enderwire
fajnet/Enderwire_Docs
Documentation about converting an Ender 3 into a CoreXZ movement printer based on the Voron Switchwire
fajnet/enderwire_nonpro
fajnet/HN_Switchwire-E3Pro
This repository hosts the files that are needed to the build my version of the Voron Switchwire from Ender 3 Pro.
fajnet/Klicky-Probe
Microswitch probe with magnetic attachement, primarily aimed at CoreXY 3d printers
fajnet/KlipperScreen
GUI for Klipper
fajnet/Nevermore_Micro
Activated Carbon Filters. Bad smells or fumes, or complaints thereof, should not keep you from being a maker!
fajnet/Original-Prusa-i3
Original Prusa i3 MK2 3D printer printed parts
fajnet/platformio-docs
PlatformIO Documentation
fajnet/Print-Tuning-Guide
fajnet/printer-mods
This is the STL and 3MF repo for multiple printer mods I created during building and rebuilding multiple SLS 3D printers. Most files are related to Voron Switchwire (Ender SW) build, however might be helpful for other use cases as well.
fajnet/Quickdraw_Probe
A Magnetically Coupled, Removable, Z Probe and Dock System
fajnet/Quickdraw_VSW
Quickdraw VSW (fork)
fajnet/SavidDanders-Ender-Switchwire
My mods and configurations for my Ender 3 Pro to Voron Switchwire Conversion
fajnet/Side-Swipe-Magnetic-Probe
Welcome to the Side Swipe Magnetic Probe for Voron v0/v0.1 Repository!
fajnet/SWE3-motor-mounts
More durable motor mounts for Ender3 -> Switchwire conversion based on yenda and TaffoFox's mods
fajnet/Unklicky
Drop in magnet based klicky probe
fajnet/Voron-MISC
misc stuff
fajnet/voronmods
fajnet/VoronUsers
Voron Community mods, slicer profiles and firmware configurations.