Supplemental material to Ruby JIT Hacking Guide for RubyKaigi 2023
This is a small tutorial to write a JIT compiler in Ruby. We don't expect any prior experience in compilers or assembly languages. It's supposed to take only several minutes if you read all hints, but challenging if you don't.
You'll write a JIT that can compile a Fibonacci benchmark. With relaxed implementation requirements, you'll hopefully create a JIT faster than existing Ruby JITs with ease.
The goal of this repository is to make you feel comfortable using and/or contributing to Ruby JIT. More importantly, enjoy writing a compiler in Ruby.
This repository assumes an x86_64-linux environment.
It also requires a Ruby master build to leverage RJIT's interface to integrate a custom JIT.
It's recommended to use the following Docker container environment. There's also bin/docker as a shorthand.
$ docker run -it -v "$(pwd):/app" k0kubun/rjit bashSee Dockerfile if you want to prepare the same environment locally.
You'll build a JIT in multiple steps.
Test scripts in test/*.rb will help you test them one by one.
You can run them with your JIT enabled with bin/ruby.
bin/ruby test/none.rb
You can also dump compiled code with bin/ruby --rjit-dump-disasm test/none.rb.
For your convenience, rake test (test/jit/compiler_test.rb)
runs all test scripts with your JIT enabled.
First, we'll compile the following simple method that just returns nil.
def none
nil
endIn CRuby, each Ruby method is internally compiled into an "Instruction Sequence", also known as ISeq. The CRuby interpreter executes Ruby code by looping over instructions in this sequence.
Typically, a CRuby JIT takes an ISeq as input to the JIT compiler and outputs machine code that works in the same way as the ISeq. In this exercise, it's the only input you'll need to take care of.
You can dump ISeqs in a file by ruby --dump=insns option.
Let's have a look at the ISeq of none method.
$ ruby --dump=insns test/none.rb
...
== disasm: #<ISeq:none@test/none.rb:1 (1,0)-(3,3)>
0000 putnil ( 1)[Ca]
0001 leave ( 3)[Re]
This means that none consists of two instructions: putnil and leave.
putnil instruction puts nil on the "stack" of the Ruby interpreter. Imagine stack = []; stack << nil.
leave instruction is like return. It pops the stack top value and uses it as a return value of the method.
Imagine return stack.pop.
NOTE: Click ▼ to open hints.
Assembler
lib/jit/assembler.rb has an x86_64 assembler that was copied from RJIT and then simplified. Feel free to remove it and write it from scratch, but this tutorial will not cover how to encode x86_64 instructions.
Here's example code using Assembler.
asm = Assembler.new
asm.mov(:rax, [:rsi, 8])
asm.add(:rax, 2)
write(asm)This writes the following machine code into memory.
mov rax, [rsi + 8]
add rax, 2rax and rsi are registers.
[rsi + 8] is memory access based off of a register, which reads memory 8 bytes after the address in rsi.
2 is an immediate value.
See lib/jit/assembler.rb for what kind of input it can handle.
Instructions
There are various x86_64 instructions. However, it's enough to use only the following instructions to pass tests in this tutorial.
For test/none.rb, only mov, add, and ret are necessary.
| Instruction | Description | Example | Effect |
|---|---|---|---|
| mov | Assign a value. | mov rax, 1 |
rax = 1 |
| add | Add a value. | add rax, 1 |
rax += 1 |
| sub | Subtract a value. | sub rax, 1 |
rax -= 1 |
| cmp | Compare values. Use it with cmovl. | cmp rdi, rsi |
rdi < rsi |
| cmovl | Assign a value if left < right. | cmovl rax, rcx |
rax = rcx if rdi < rsi |
| test | Compare values. Use it with jz. | test rax, 1 |
rax & 1 |
| jz | Jump if left and right have no common bits. | jz 0x1234 |
goto 0x1234 if rax & 1 == 0 |
| jmp | Jump to an address. | jmp 0x1234 |
goto 0x1234 |
| call | Call a function. | call 0x1234 |
func() |
| ret | Return a value. | ret |
return rax |
Registers
Registers are like variables in machine code. You're free to use registers in whatever way, but a reference implementation used only the following registers.
| Register | Purpose |
|---|---|
| rdi | ec (execution context) is set when a JIT function is called. It represents a Ruby thread. Used when you push/pop a stack frame. |
| rsi | cfp (control frame pointer) is set when a JIT function is called. It represents a stack frame. Used when you fetch a local variable or a receiver. |
| rax | A JIT function return value to be set before ret instruction. It can be also used as a "scratch register" to hold temporary values. |
| r8 | A general-purpose register. The reference implementation used this for the 1st slot of the Ruby VM stack, stack[0]. |
| r9 | A general-purpose register. The reference implementation used this for the 2nd slot of the Ruby VM stack, stack[1]. |
| r10 | A general-purpose register. The reference implementation used this for the 3rd slot of the Ruby VM stack, stack[2]. |
| r11 | A general-purpose register. The reference implementation used this for the 4th slot of the Ruby VM stack, stack[3]. |
Compiling putnil
Open lib/jit/compiler.rb and add a case for putnil.
# Iterate over each YARV instruction.
insn_index = 0
while insn_index < iseq.body.iseq_size
insn = INSNS.fetch(C.rb_vm_insn_decode(iseq.body.iseq_encoded[insn_index]))
case insn.name
in :nop
# none
+ in :putnil
+ # ...
end
insn_index += insn.len
endLet's push nil onto the stack.
In the scope of this tutorial, it's enough to use a random register as a replacement for a stack slot.
Let's say you decided to use r8 for stack[0], you could write the code as follows, for example.
+ STACK = [:r8]
# Iterate over each YARV instruction.
insn_index = 0
+ stack_size = 0
while insn_index < iseq.body.iseq_size
insn = INSNS.fetch(C.rb_vm_insn_decode(iseq.body.iseq_encoded[insn_index]))
case insn.name
in :nop
# none
in :putnil
+ asm.mov(STACK[stack_size], C.to_value(nil))
+ stack_size += 1
end
insn_index += insn.len
endC is a module with useful helpers to write a JIT.
C.to_value converts any Ruby object into its representation in the C language (and machine code).
C.to_value(nil) is 4, so this does asm.mov(:r8, 4), which means stack[0] = nil.
This value in r8 should be then handled by subsequent instructions like leave.
Compiling leave
leave instruction needs to do two things.
- Pop a stack frame
- Return a value
A JIT function is called after a corresponding stack frame is pushed.
However, the Ruby VM is not responsible for popping the stack frame after calling the JIT function.
So a JIT function needs to pop it on leave instruction.
A stack frame cfp is in rsi. The interpreter reads ec->cfp to fetch the current stack frame and ec is in rdi.
Therefore, you can generate code to pop a stack frame as follows.
STACK = [:r8]
+ EC = :rdi
+ CFP = :rsi
# Iterate over each YARV instruction.
insn_index = 0
stack_size = 0
while insn_index < iseq.body.iseq_size
insn = INSNS.fetch(C.rb_vm_insn_decode(iseq.body.iseq_encoded[insn_index]))
case insn.name
in :nop
# none
in :putnil
asm.mov(STACK[stack_size], C.to_value(nil))
stack_size += 1
+ in :leave
+ asm.add(CFP, C.rb_control_frame_t.size)
+ asm.mov([EC, C.rb_execution_context_t.offsetof(:cfp)], CFP)
end
insn_index += insn.len
endThe cfp grows downward; cfp -= 1 pushes a frame, and cfp += 1 pops a frame.
Here, we want to pop a frame, so we do cfp += 1.
When we increment a pointer, 1 actually means the size of what it points to.
cfp is called rb_control_frame_t in the Ruby VM, and you can get its size by C.rb_control_frame_t.size.
To set that to ec->cfp, you need to get a memory address based off of ec.
The offset of ec->cfp relative to the head of ec is in C.rb_execution_context_t.offsetof(:cfp).
So you can use [EC, C.rb_execution_context_t.offsetof(:cfp)] to get ec->cfp.
Finally, we'll return a value from the JIT function.
You should set a stack-top value to rax and then put ret instruction.
# Iterate over each YARV instruction.
insn_index = 0
stack_size = 0
while insn_index < iseq.body.iseq_size
insn = INSNS.fetch(C.rb_vm_insn_decode(iseq.body.iseq_encoded[insn_index]))
case insn.name
in :nop
# none
in :putnil
asm.mov(STACK[stack_size], C.to_value(nil))
stack_size += 1
in :leave
asm.add(CFP, C.rb_control_frame_t.size)
asm.mov([EC, C.rb_execution_context_t.offsetof(:cfp)], CFP)
+ asm.mov(:rax, STACK[stack_size - 1])
+ asm.ret
end
insn_index += insn.len
endNow you should be able to execute test/none.rb. Test it as follows.
$ bin/ruby --rjit-dump-disasm test/none.rb
0x564e87d2c000: mov r8, 4
0x564e87d2c007: add rsi, 0x40
0x564e87d2c00b: mov qword ptr [rdi + 0x10], rsi
0x564e87d2c00f: mov rax, r8
0x564e87d2c012: ret
nil
rake test should pass one test that runs test/none.rb.
Also try changing what you're giving to C.to_value in putnil to double-check
the interpreter is calling the JIT function you generated.
Next, we'll compile something more interesting: Integer#+.
def plus
1 + 2
end$ ruby --dump=insns test/plus.rb
...
== disasm: #<ISeq:plus@test/plus.rb:1 (1,0)-(3,3)>
0000 putobject_INT2FIX_1_ ( 2)[LiCa]
0001 putobject 2
0003 opt_plus <calldata!mid:+, argc:1, ARGS_SIMPLE>[CcCr]
0005 leave ( 3)[Re]
plus has four instructions: putobject_INT2FIX_1_, putobject, opt_plus, and leave.
putobject_INT2FIX_1_ is "operand unification" of putobject 1.
putnil and leave didn't take any arguments, but putobject does.
We call an argument of instructions an operand.
At 0001, there's putobject instruction, and its operand 2 is at 0002 before opt_plus at 0003.
At 0000, there's putobject_INT2FIX_1_ instruction, and its operand INT2FIX(1) is unified with putobject,
so it doesn't take an operand, which makes the ISeq shorter.
putobject (and putobject_INT2FIX_1_) pushes an operand to the stack.
Both instructions and operands are in iseq.body.iseq_encoded.
To get an operand for 0001 putobject which is at 0002, you need to look at iseq.body.iseq_encoded[2].
So that works like stack << iseq.body.iseq_encoded[2].
opt_plus pops two objects from the stack, calls #+, and pushes the result onto the stack.
So it's stack << stack.pop + stack.pop.
Compiling putobject
For putobject_INT2FIX_1_, you need to hard-code the operand as 1.
Instead of INT2FIX(1) that is used in C, you can use C.to_value(1) instead.
So it can be:
STACK = [:r8, :r9]
in :putobject_INT2FIX_1_
asm.mov(STACK[stack_size], C.to_value(1))
stack_size += 1For putobject, you need to get an operand from iseq.body.iseq_encoded as explained above.
You could write:
in :putobject
operand = iseq.body.iseq_encoded[insn_index + 1]
asm.mov(STACK[stack_size], operand)Compiling opt_plus
opt_plus is capable of handling any #+ methods, but specifically optimizes a few methods such as Integer#+.
In this tutorial, we're going to handle only Integers. It's okay to assume operands are all Integers.
In CRuby, a small-enough Integer is expressed as (num << 1) + 1.
So an Integer object 1 is expressed as (1 << 1) + 1, which is 3.
You'll take (num1 << 1) + 1 and (num2 << 1) + 1 as operands.
If you just add them, the result will be ((num1 + num2) << 1) + 2.
The actual representation for num1 + num2 is ((num1 + num2) << 1) + 1,
so you'll need to subtract it by 1.
Here's an example implementation.
in :opt_plus
recv = STACK[stack_size - 2]
obj = STACK[stack_size - 1]
asm.add(recv, obj)
asm.sub(recv, 1)
stack_size -= 1Test those instructions with bin/ruby --rjit-dump-disasm test/plus.rb.
Finally, we'll have a look at the benchmark target, Fibonacci.
def fib(n)
if n < 2
return n
end
return fib(n-1) + fib(n-2)
end$ ruby --dump=insns test/fib.rb
...
== disasm: #<ISeq:fib@test/fib.rb:1 (1,0)-(6,3)>
local table (size: 1, argc: 1 [opts: 0, rest: -1, post: 0, block: -1, kw: -1@-1, kwrest: -1])
[ 1] n@0<Arg>
0000 getlocal_WC_0 n@0 ( 2)[LiCa]
0002 putobject 2
0004 opt_lt <calldata!mid:<, argc:1, ARGS_SIMPLE>[CcCr]
0006 branchunless 11
0008 getlocal_WC_0 n@0 ( 3)[Li]
0010 leave [Re]
0011 putself ( 5)[Li]
0012 getlocal_WC_0 n@0
0014 putobject_INT2FIX_1_
0015 opt_minus <calldata!mid:-, argc:1, ARGS_SIMPLE>[CcCr]
0017 opt_send_without_block <calldata!mid:fib, argc:1, FCALL|ARGS_SIMPLE>
0019 putself
0020 getlocal_WC_0 n@0
0022 putobject 2
0024 opt_minus <calldata!mid:-, argc:1, ARGS_SIMPLE>[CcCr]
0026 opt_send_without_block <calldata!mid:fib, argc:1, FCALL|ARGS_SIMPLE>
0028 opt_plus <calldata!mid:+, argc:1, ARGS_SIMPLE>[CcCr]
0030 leave ( 6)[Re]
fib has many more instructions.
opt_minus and opt_lt are like opt_plus except it performs #- and #< respectively.
getlocal_WC_0 is operand unification of getlocal *, 0 where WC stands for a wildcard.
It pushes a local variable onto the stack.
branchunless jumps to a destination specified by an operand when a stack-top value is
false or nil.
putself pushes a receiver onto the stack.
opt_send_without_block calls a method with a receiver and arguments on the stack.
Compiling opt_minus
Remember opt_plus.
You'll take (num1 << 1) + 1 and (num2 << 1) + 1 as operands.
If you subtract one by the other, the result will be ((num1 - num2) << 1).
But the actual representation for num1 - num2 is ((num1 - num2) << 1) + 1.
So you'll need to add 1 to it.
Here's an example implementation.
STACK = [:r8, :r9, :r10, :r11]
in :opt_minus
recv = STACK[stack_size - 2]
obj = STACK[stack_size - 1]
asm.sub(recv, obj)
asm.add(recv, 1)
stack_size -= 1Test the instruction with bin/ruby --rjit-dump-disasm test/minus.rb.
Compiling getlocal
getlocal_WC_0 means getlocal *, 0. The * part is an operand and it has an index to the local variable from an "environment pointer" (EP).
The 0 part is a "level", which shows how many levels of EPs you need to go deeper to get a local variable.
This is needed when a local variable environment is nested, e.g. a block inside a method.
Since it's 0 this time, you will not need to worry about digging EPs. You'll need to get the EP of the current "control frame" (cfp).
cfp is in rsi and you can get the offset to cfp->ep from C.rb_control_frame_t.offsetof(:ep).
So [:rsi, C.rb_control_frame_t.offsetof(:ep)] can be used to get an EP.
Once you get an EP, you need to find a local variable. The index is an operand, which can be fetched with iseq.body.iseq_encoded[insn_index + 1].
The index is a positive number but local variables actually live "below" the EP. So you have to negate the index.
Besides, the unit of indexes is a VALUE type in C, which represents a Ruby object. So the index to a local variable from an EP is
-iseq.body.iseq_encoded[insn_index + 1] * C.VALUE.size.
All in all, an example implementation looks like this.
in :getlocal_WC_0
# Get EP
asm.mov(:rax, [CFP, C.rb_control_frame_t.offsetof(:ep)])
# Load the local variable
idx = iseq.body.iseq_encoded[insn_index + 1]
asm.mov(STACK[stack_size], [:rax, -idx * C.VALUE.size])
stack_size += 1Test the instruction with bin/ruby --rjit-dump-disasm test/local.rb.
Compiling opt_lt
Again, assume operands are Integers.
Comparing (num1 << 1) + 1 and (num2 << 1) + 1 would return the same result as comparing num1 and num2.
You'll use a cmp instruction that compares them.
Once you compare the values, you'll need to generate code that conditionally returns something.
Integer#< returns true or false.
There's a family of instructions that conditionally set a value based on a prior cmp (or test).
To conditionally set a value if num1 < num2 holds based on the previous cmp,
you can use cmovl (conditionally move if less).
An example implementation is as follows.
in :opt_lt
recv = STACK[stack_size - 2]
obj = STACK[stack_size - 1]
asm.cmp(recv, obj)
asm.mov(recv, C.to_value(false))
asm.mov(:rax, C.to_value(true))
asm.cmovl(recv, :rax)
stack_size -= 1Test the instruction with bin/ruby --rjit-dump-disasm test/lt.rb.
Compiling putself
fib method is called without an argument. In Ruby, it implicitly uses the receiver of the current frame (cfp).
cfp is in rsi, and the offset to cfp->self (receiver) is implemented at C.rb_control_frame_t.offsetof(:self).
So [:rsi, C.rb_control_frame_t.offsetof(:self)] can be used to fetch a receiver.
An example implementation looks like this.
in :putself
asm.mov(STACK[stack_size], [CFP, C.rb_control_frame_t.offsetof(:self)])
stack_size += 1Compiling opt_send_without_block
Congratulations on making it to this stage. You've accomplished a lot already. I hope you've enjoyed your journey. We're going to tackle a couple of instructions that may be the most challenging part in this tutorial. If you get lost, consider just copying the code that is shown later and playing with it.
opt_send_without_block supports various method calls.
However, in this tutorial, it's okay to assume any method call is a Ruby method call.
As long as you use --rjit-call-threshold=3 (compile methods that have been called three times),
the cache of all opt_send_without_block instructions is "warmed up" in all test scripts.
It means that the cache has a reference to an ISeq. For simplicity in this tutorial,
assume that it's not gonna change and you won't need to invalidate it.
opt_send_without_block takes a "call data" operand, which is a pair of "call info" and "call cache".
A call data object can be instantiated with cd = C.rb_call_data.new(iseq.body.iseq_encoded[insn_index + 1]).
A call info is in cd.ci, which has information like the number of arguments.
ci has a packed data structure which cannot be accessed like a normal struct.
So you need to get the number of arguments using a special helper, C.vm_ci_argc(ci).
A call cache has a reference to an ISeq. cd.cc.cme_.def.body.iseq.iseqptr has a callee ISeq.
For better performance, we want to compile everything and directly jump to an already-compiled address.
You can call compile(callee_iseq) if callee_iseq.body.jit_func is still 0 (NULL in C).
Once a callee function becomes ready, we need to prepare for calling a method.
Since our getlocal implementation gets a local variable on the stack relative to an EP,
we have to set arguments to the stack, which are local variables to the callee.
The VM stack looks like this when you call a method.
| locals | cme | block_handler | frame type (callee EP) | stack bottom (callee SP) |
For locals, we want to put arguments. There's a "stack pointer" in SP which points to
a free stack slot above the stack top. You could write values to it and keep bumping the SP until you finish writing all arguments.
Once it's done, SP needs to be bumped three more times to accommodate a "cme" (callable method entry), a block handler, and a frame type.
You don't need to use them in this tutorial. Just bump SP by 3 to get a callee SP. EP is one slot below that.
Set those sp and ep fields to a callee cfp after bumping cfp.
Remember what you did at leave instruction; pushing a frame means to subtract it by C.rb_control_frame_t.size.
Since putself refers to it, you may set cfp->self as well, using C.rb_control_frame_t.offsetof(:self).
Note, however, that we don't actually use the receiver in cfp for method dispatch. You may just skip it.
Before and after calling a callee function, you have to save and restore registers you're using for the stack
so that the callee function can use them.
We've used r8, r9, r10, and r11 as STACK. You can use push instruction to push a register to the machine stack,
and then use pop instruction in the reverse order to restore a register from the machine stack.
An example implementation looks like this.
in :opt_send_without_block
# Compile the callee ISEQ
cd = C.rb_call_data.new(iseq.body.iseq_encoded[insn_index + 1])
callee_iseq = cd.cc.cme_.def.body.iseq.iseqptr
if callee_iseq.body.jit_func == 0
compile(callee_iseq)
end
# Get SP
asm.mov(:rax, [CFP, C.rb_control_frame_t.offsetof(:sp)])
# Spill arguments
C.vm_ci_argc(cd.ci).times do |i|
asm.mov([:rax, C.VALUE.size * i], STACK[stack_size - C.vm_ci_argc(cd.ci) + i])
end
# Push cfp: ec->cfp = cfp - 1
asm.sub(CFP, C.rb_control_frame_t.size)
asm.mov([EC, C.rb_execution_context_t.offsetof(:cfp)], CFP)
# Set SP
asm.add(:rax, C.VALUE.size * (C.vm_ci_argc(cd.ci) + 3))
asm.mov([CFP, C.rb_control_frame_t.offsetof(:sp)], :rax)
# Set EP
asm.sub(:rax, C.VALUE.size)
asm.mov([CFP, C.rb_control_frame_t.offsetof(:ep)], :rax)
# Set receiver
asm.sub(:rax, STACK[stack_size - C.vm_ci_argc(cd.ci) - 1])
asm.mov([CFP, C.rb_control_frame_t.offsetof(:self)], :rax)
# Save stack registers
STACK.each do |reg|
asm.push(reg)
end
# Call the JIT func
asm.call(callee_iseq.body.jit_func)
# Pop stack registers
STACK.reverse_each do |reg|
asm.pop(reg)
end
# Set a return value
asm.mov(STACK[stack_size - C.vm_ci_argc(cd.ci) - 1], :rax)
stack_size -= C.vm_ci_argc(cd.ci)Test the instruction with bin/ruby --rjit-dump-disasm test/send.rb.
This code has some optimization opportunities when you need to support only fib.
In fact, my reference implementation
is already a bit faster than that. It could be even faster, for example, if you use registers for local variables.
Compiling branchunless
It's almost there. This will be the last instruction you'll compile to run fib.
This is probably the most interesting and challenging part of this tutorial.
Supporting this instruction requires a major refactoring on the boilerplate code. It's because past test scripts run instructions from top to bottom whereas you need to jump to different instruction indexes based on runtime values.
There's not only the jump support, but also complexity in dependencies.
Let's have a look at ruby --dump=insns test/branch.rb.
== disasm: #<ISeq:branch@test/branch.rb:1 (1,0)-(7,3)>
local table (size: 1, argc: 1 [opts: 0, rest: -1, post: 0, block: -1, kw: -1@-1, kwrest: -1])
[ 1] flag@0<Arg>
0000 getlocal_WC_0 flag@0 ( 2)[LiCa]
0002 branchunless 6
0004 putobject_INT2FIX_1_ ( 3)[Li]
0005 leave ( 7)[Re]
0006 putobject_INT2FIX_0_ ( 5)[Li]
0007 leave ( 7)[Re]
I inserted newlines into the actual output to indicate "basic block" boundaries.
There are three blocks: the first block from 0000, the second block from 0004, and the third block from 0006.
Let's say you start compiling the first block, you'll need to generate code to jump to the second block or the third block. However, the second block and the third block have not been compiled yet. You cannot compile it from top to bottom as before.
Then, why not compile it from the second block and the third block, and then compile the first block?
Sure, it works for this example. But what if the second block calls the first block?
It's a circular dependency. And it's exactly what fib does.
So you have to design the compiler in a way that it supports circular dependencies.
One suggested solution is to write out dummy addresses first, and then rewrite them after all blocks are compiled.
Rewriting a past address requires you to figure out the address that Assembler used.
The Assembler in the boilerplate doesn't have such interface, so you have to define it yourself.
For example, you could add this kind of interface.
--- a/lib/jit/assembler.rb
+++ b/lib/jit/assembler.rb
@@ -50,6 +50,7 @@ module JIT
end
def assemble(addr)
+ set_start_addrs(addr)
resolve_rel32(addr)
resolve_labels
@@ -905,6 +876,12 @@ module JIT
@labels[label] = @bytes.size
end
+ # Mark the starting addresses of a branch
+ def branch(branch)
+ @branches[@bytes.size] << branch
+ yield
+ end
+
private
def insn(prefix: 0, opcode:, rd: nil, mod_rm: nil, disp: nil, imm: nil)
@@ -1010,6 +987,14 @@ module JIT
[Rel32.new(addr), Rel32Pad, Rel32Pad, Rel32Pad]
end
+ def set_start_addrs(write_addr)
+ (@bytes.size + 1).times do |index|
+ @branches.fetch(index, []).each do |branch|
+ branch.start_addr = write_addr + index
+ end
+ end
+ endThen a random object you're giving to #branch will get start_addr assigned.
If the object also has a Proc to re-compile a branch, you can just buffer those objects
and calls them later.
To simplify the problem, you could split an ISeq into basic blocks, and just compile each block as before. Here's an example logic that works for the test scripts in this tutorial.
# Get a list of basic blocks in a method
def split_blocks(iseq, insn_index: 0, stack_size: 0, split_indexes: [])
return [] if split_indexes.include?(insn_index)
split_indexes << insn_index
block = { start_index: insn_index, end_index: nil, stack_size: }
blocks = [block]
while insn_index < iseq.body.iseq_size
insn = INSNS.fetch(C.rb_vm_insn_decode(iseq.body.iseq_encoded[insn_index]))
case insn.name
when :branchunless
block[:end_index] = insn_index
stack_size += sp_inc(iseq, insn_index)
next_index = insn_index + insn.len
blocks += split_blocks(iseq, insn_index: next_index, stack_size:, split_indexes:)
blocks += split_blocks(iseq, insn_index: next_index + iseq.body.iseq_encoded[insn_index + 1], stack_size:, split_indexes:)
break
when :leave
block[:end_index] = insn_index
break
else
stack_size += sp_inc(iseq, insn_index)
insn_index += insn.len
end
end
blocks
end
# Get a stack size increase for a YARV instruction.
def sp_inc(iseq, insn_index)
insn = INSNS.fetch(C.rb_vm_insn_decode(iseq.body.iseq_encoded[insn_index]))
case insn.name
in :opt_plus | :opt_minus | :opt_lt | :leave | :branchunless
-1
in :nop
0
in :putnil | :putobject_INT2FIX_0_ | :putobject_INT2FIX_1_ | :putobject | :putself | :getlocal_WC_0
1
in :opt_send_without_block
cd = C.rb_call_data.new(iseq.body.iseq_encoded[insn_index + 1])
-C.vm_ci_argc(cd.ci)
end
endEach block is represented as a Hash that has start_index, end_index, and an initial stack_size.
The first block's first address should be set to iseq.body.jit_func.
Finally, let's compile branchunless. With blocks made by split_blocks and branches = [], an example implementation
looks like this.
Branch = Struct.new(:start_addr, :compile)
in :branchunless
next_index = insn_index + insn.len
next_block = blocks.find { |block| block[:start_index] == next_index }
jump_index = next_index + iseq.body.iseq_encoded[insn_index + 1]
jump_block = blocks.find { |block| block[:start_index] == jump_index }
# This `test` sets ZF only for Qnil and Qfalse, which lets jz jump.
asm.test(STACK[stack_size - 1], ~C.to_value(nil))
branch = Branch.new
branch.compile = proc do |asm|
dummy_addr = @jit_buf + JIT_BUF_SIZE
asm.jz(jump_block.fetch(:start_addr, dummy_addr))
asm.jmp(next_block.fetch(:start_addr, dummy_addr))
end
asm.branch(branch) do
branch.compile.call(asm)
end
branches << branchThe branches are then re-compiled with:
branches.each do |branch|
with_addr(branch[:start_addr]) do
asm = Assembler.new
branch.compile.call(asm)
write(asm)
end
enddef with_addr(addr)
jit_pos = @jit_pos
@jit_pos = addr - @jit_buf
yield
ensure
@jit_pos = jit_pos
endThat's all. Test it with bin/ruby --rjit-dump-disasm test/branch.rb.
If everything is done correctly, bin/ruby test/fib.rb should also work.
Let's measure the performance. bin/bench allows you to compare your JIT (ruby-jit) and other CRuby JITs.
$ bin/bench
Calculating -------------------------------------
no-jit rjit yjit ruby-jit
fib(32) 5.250 19.481 32.841 58.145 i/s
Comparison:
fib(32)
ruby-jit: 58.1 i/s
yjit: 32.8 i/s - 1.77x slower
rjit: 19.5 i/s - 2.98x slower
no-jit: 5.2 i/s - 11.08x slower