Rust bindings for ESP-IDF

(Espressif's IoT Development Framework)

The ESP-IDF API in Rust, with support for each ESP chip (ESP32, ESP32S2, ESP32S3, ESP32C3, etc.) based on the Rust target.

For more information, check out:

The Rust on ESP Book
The esp-idf-template project
The esp-idf-svc project
The esp-idf-hal project
The Rust for Xtensa toolchain
The Rust-with-STD demo project

Table of contents

Build
Features
sdkconfig
Build configuration
Extra esp-idf components
Conditional compilation
More info

Build

To build this crate, please follow all the build requirements specified in the ESP-IDF Rust Hello World template crate
The relevant Espressif toolchain, as well as the ESP-IDF framework itself, are all automatically downloaded during the build:
- With feature native (default): utilizing native ESP-IDF tooling via the embuild crate or
- With feature pio (backup): utilizing PlatformIO (also via the embuild crate).
Check the ESP-IDF Rust Hello World template crate for a "Hello, world!" Rust template demonstrating how to use and build this crate.
Check the demo crate for a more comprehensive example in terms of capabilities.

Features

native

This is the default feature for downloading all tools and building the ESP-IDF framework using the framework's "native" (own) tooling. It relies on build and installation utilities available in the embuild crate.

The native builder installs all needed tools to compile this crate as well as the ESP-IDF framework itself.
pio

This is a backup feature for installing all build tools and building the ESP-IDF framework. It uses PlatformIO via the embuild crate.

Similarly to the native builder, the pio builder also automatically installs all needed tools (PlatformIO packages and frameworks in this case) to compile this crate as well as the ESP-IDF framework itself.

⚠️ The pio builder is less flexible than the default native builder in that it can work with only one, specific version of ESP-IDF. At the time of writing, this is V4.3.2.
binstart

Defines the esp-idf entry-point for when the root crate is a binary crate that defines a main function.
libstart

Defines the esp-idf entry-point for when the root crate is a library crate. the root crate is expected to provide a
```
#[no_mangle]
fn main() {}
```
function.

sdkconfig

The esp-idf makes use of an sdkconfig file for its compile-time component configuration (see the esp-idf docs for more information). This config is separate from the build configuration.

(native builder only) Using cargo-idf to interactively modify ESP-IDF's `sdkconfig` file

TBD: Upcoming

(pio builder only) Using cargo-pio to interactively modify ESP-IDF's `sdkconfig` file

To enable Bluetooth, or do other configurations to the ESP-IDF sdkconfig you might take advantage of the cargo-pio Cargo subcommand:

To install it, issue cargo install cargo-pio --git https://github.com/ivmarkov/cargo-pio
To open the ESP-IDF interactive menuconfig system, issue cargo pio espidf menuconfig in the root of your binary crate project
To use the generated/updated sdkconfig file, follow the steps described in the "Bluetooth Support" section

Build configuration

There are two ways to configure how the ESP-IDF framework is compiled:

Environment variables, denoted by $VARIABLE;

The environment variables can be passed on the command line, or put into the [env] section of a .cargo/config.toml file (see cargo reference).
The [package.metadata.esp-idf-sys] section of the Cargo.toml, denoted by field.

Note
Configuration can only come from the root crate's Cargo.toml. The root crate is the package in the workspace directory. If there is not root crate in case of a virtual workspace, its name can be specified with the ESP_IDF_SYS_ROOT_CRATE environment variable.

⚠️ Environment variables always take precedence over Cargo.toml metadata.

Note: workspace directory
The workspace directory mentioned here is always the directory containing the Cargo.lock file and the target directory (where the build artifacts are stored). It can be overridden with the CARGO_WORKSPACE_DIR environment variable, should this not be the right directory.
(See embuild::cargo::workspace_dir for more information).

There is no need to explicitly add a [workspace] section to the Cargo.toml of the workspace directory.

The following configuration options are available:

esp_idf_sdkconfig_defaults, $ESP_IDF_SDKCONFIG_DEFAULTS

A single path or a list of paths to sdkconfig.defaults files to be used as base values for the sdkconfig. If such a path is relative, it will be relative to the workspace directory.

Defaults to sdkconfig.defaults.

In case of the environment variable, multiple elements should be ;-separated.
Note
For each defaults file in this list, a more specific file will also be searched and used. This happens with the following patterns and order (least to most specific):
1. <path>
2. <path>.<profile>
3. <path>.<mcu>
4. <path>.<profile>.<mcu>
where <profile> is the current cargo profile used (debug/release) and <mcu> specifies the mcu for which this is currently compiled for (see the mcu configuration option below).
⚠️ A setting contained in a more specific defaults file will override the same setting specified in a less specific one.
esp_idf_sdkconfig, $ESP_IDF_SDKCONFIG

The sdkconfig file used to configure the esp-idf. If this is a relative path, it is relative to the workspace directory.

Defaults to sdkconfig.
Note
Similar to the sdkconfig.defaults-file a more specific sdkconfig-file will be selected if available. This happens with the following patterns and precedence:
1. <path>.<profile>.<mcu>
2. <path>.<mcu>
3. <path>.<profile>
4. <path>
Note: native builder only
The cargo optimization options (debug and opt-level) are used by default to determine the compiler optimizations of the esp-idf, however if the compiler optimization options are already set in the sdkconfig they will be used instead.
esp_idf_tools_install_dir, $ESP_IDF_TOOLS_INSTALL_DIR

The install location for the ESP-IDF framework tooling.

Note
The framework tooling is either PlatformIO when the pio builder is used, or the ESP-IDF native toolset when the native builder is used (default).

This option can take one of the following values:
- workspace (default) - the tooling will be installed or used in <crate-workspace-dir>/.embuild/platformio for pio, and <crate-workspace-dir>/.embuild/espressif for the native builder;
- out - the tooling will be installed or used inside esp-idf-sys's build output directory, and will be deleted when cargo clean is invoked;
- global - the tooling will be installed or used in its standard directory (~/.platformio for PlatformIO, and ~/.espressif for the native ESP-IDF toolset);
- custom:<dir> - the tooling will be installed or used in the directory specified by <dir>. If this directory is a relative location, it is assumed to be relative to the workspace directory;
- fromenv - use the build framework from the environment
  - native builder: use activated esp-idf environment (see esp-idf docs unix / windows)
  - pio builder: use platformio from the environment (i.e. $PATH)
  and error if this is not possible.
⚠️ Please be extra careful with the custom:<dir> setting when switching from pio to native and the other way around, because the builder will install the tooling in <dir> without using any additional platformio or espressif subdirectories, so if you are not careful, you might end up with both PlatformIO, as well as the ESP-IDF native tooling intermingled together in a single folder.

Note
The ESP-IDF git repository will be cloned inside the tooling directory. The native builder will use the esp-idf at idf_path of available.
idf_path, $IDF_PATH (native builder only)

A path to a user-provided local clone of the esp-idf, that will be used instead of the one downloaded by the build script.
esp_idf_version, $ESP_IDF_VERSION (native builder only)

The version used for the esp-idf, can be one of the following:
- commit:<hash>: Uses the commit <hash> of the esp-idf repository. Note that this will clone the whole esp-idf not just one commit.
- tag:<tag>: Uses the tag <tag> of the esp-idf repository.
- branch:<branch>: Uses the branch <branch> of the esp-idf repository.
- v<major>.<minor> or <major>.<minor>: Uses the tag v<major>.<minor> of the esp-idf repository.
- <branch>: Uses the branch <branch> of the esp-idf repository.
Defaults to v4.4.1.
esp_idf_repository, $ESP_IDF_REPOSITORY (native builder only)

The URL to the git repository of the esp-idf, defaults to https://github.com/espressif/esp-idf.git.

Note
When the pio builder is used, it is possible to achieve something similar to ESP_IDF_VERSION and ESP_IDF_REPOSITORY by using the platform_packages PlatformIO option as follows:

ESP_IDF_PIO_CONF="platform_packages = framework-espidf @ <git-url> [@ <git-branch>]"

The above approach however has the restriction that PlatformIO will always use the ESP-IDF build tooling from its own ESP-IDF distribution, so the user-provided ESP-IDF branch may or may not compile. The current PlatformIO tooling is suitable for compiling ESP-IDF branches derived from versions 4.3.X and 4.4.X.
$ESP_IDF_GLOB[_XXX]_BASE and $ESP_IDF_GLOB[_XXX]_YYY

A pair of environment variable prefixes that enable copying files and directory trees that match a certain glob mask into the native C project used for building the ESP-IDF framework:
- ESP_IDF_GLOB[_XXX]_BASE specifies the base directory which will be glob-ed for resources to be copied
- ESP_IDF_GLOB[_XXX]_BASE_YYY specifies one or more environment variables that represent the glob masks of resources to be searched for and copied, using the directory designated by the ESP_IDF_GLOB[_XXX]_BASE environment variable as the root. For example, if the following variables are specified:
  - ESP_IDF_GLOB_HOMEDIR_BASE=/home/someuser
  - ESP_IDF_GLOB_HOMEDIR_FOO=foo*
  - ESP_IDF_GLOB_HOMEDIR_BAR=bar* ... then all files and directories matching 'foo*' or 'bar*' from the home directory of the user will be copied into the ESP-IDF C project.
  Note also that _HOMEDIR in the above example is optional, and is just a mechanism allowing the user to specify more than one base directory and its glob patterns.
$ESP_IDF_PIO_CONF_XXX (pio builder only)

A PlatformIO setting (or multiple settings separated by a newline) that will be passed as-is to the platformio.ini file of the C project that compiles the ESP-IDF.

Check the PlatformIO documentation for more information as to what settings you can pass via this variable.

Note
This is not one variable, but rather a family of variables all starting with ESP_IDF_PIO_CONF_. For example, passing ESP_IDF_PIO_CONF_1 as well as ESP_IDF_PIO_CONF_FOO is valid and all such variables will be honored.
esp_idf_cmake_generator, $ESP_IDF_CMAKE_GENERATOR (native builder only)

The CMake generator to be used when building the ESP-IDF.

If not specified or set to default, Ninja will be used on all platforms except Linux/aarch64, where (for now) the Unix Makefiles generator will be used, as there are no Ninja builds for that platform provided by Espressif yet.

Possible values for this environment variable are the names of all command-line generators that CMake supports with spaces and hyphens removed.
mcu, $MCU

The MCU name (i.e. esp32, esp32s2, esp32s3 esp32c3 and esp32h2).

If not set this will be automatically detected from the cargo target.

⚠️ Older ESP-IDF versions might not support all MCUs from above.
esp_idf_components, $ESP_IDF_COMPONENTS (native builder only)

The (;-separated for the environment variable) list of esp-idf component names that should be built. This list is used to trim the esp-idf build. Any component that is a dependency of a component in this list will also automatically be built.

Defaults to all components being built.

Note
Some components must be explicitly enabled in the sdkconfig.
Extra components must also be added to this list if they are to be built.

Example

An example of the [package.metadata.esp-idf-sys] section of the Cargo.toml.

[package.metadata.esp-idf-sys]
esp_idf_tools_install_dir = "global"
esp_idf_sdkconfig = "sdkconfig"
esp_idf_sdkconfig_defaults = ["sdkconfig.defaults", "sdkconfig.defaults.ble"]
# native builder only
esp_idf_version = "branch:release/v4.4"
esp_idf_components = ["pthread"]

Extra esp-idf components

It is possible to let esp-idf-sys compile extra esp-idf components and generate bindings for them.

This is possible by adding an object to the package.metadata.esp-idf-sys.extra_components array of the Cargo.toml. esp-idf-sys will honor all such extra components in the root crate's and all direct dependencies' Cargo.toml.

Note
By only specifying the bindings_header field, one can extend the set of esp-idf bindings that were generated from src/include/esp-idf/bindings.h.

An extra component can be specified like this:

[[package.metadata.esp-idf-sys.extra_components]]
# A single path or a list of paths to a component directory or directory containing components.
# 
# Each path can be absolute or relative. Relative paths will be relative to the
# folder containing the defining `Cargo.toml`.
# 
# **This field is optional.** No component will be built if this field is absent, though
# the bindings of the `[Self::bindings_header]` will still be generated.
component_dirs = ["dir1", "dir2"] # or "dir"

# The path to the C header to generate the bindings with. If this option is absent,
# **no** bindings will be generated.
#
# The path can be absolute or relative. A relative path will be relative to the
# folder containing the defining `Cargo.toml`.
#
# This field is optional.
bindings_header = "bindings.h"

# If this field is present, the component bindings will be generated separately from
# the `esp-idf` bindings and put into their own module inside the `esp-idf-sys` crate.
# Otherwise, if absent, the component bindings will be added to the existing
# `esp-idf` bindings (which are available in the crate root).
#
# To put the bindings into its own module, a separate bindgen instance will generate
# the bindings. Note that this will result in duplicate `esp-idf` bindings if the
# same `esp-idf` headers that were already processed for the `esp-idf` bindings are
# included by the component(s).
#
# This field is optional.
bindings_module = "name"

and is equivalent to

[package.metadata.esp-idf-sys]
extra_components = [
    { component_dirs = [ "dir1", "dir2" ], bindings_header = "bindings.h", bindings_module = "name" }
]

Conditional compilation

The esp-idf-sys build script will set rustc cfgs available for its sources.

⚠️ If an upstream crate also wants to have access to the cfgs it must:
have esp-idf-sys as a dependency, and
propagate the cfgs in its build script with
embuild::build::CfgArgs::output_propagated("ESP_IDF").expect("no esp-idf-sys cfgs");
using the embuild crate.

The list of available cfgs:

esp_idf_comp_{component}_enabled for each component
esp_idf_version="{major}.{minor}"
esp_idf_version_full="{major}.{minor}.{patch}"
esp_idf_version_major="{major}"
esp_idf_version_minor="{minor}"
esp_idf_version_patch="{patch}"
esp_idf_{sdkconfig_option}

Each sdkconfig setting where {sdkconfig_option} corresponds to the option set in the sdkconfig lowercased and without the CONFIG_ prefix. Only options set to y will get a cfg.
{mcu}

Corresponds to the mcu for which the esp-idf is compiled for.

More info

If you are interested in how it all works under the hood, check the build.rs build script of this crate.

farbodpm/esp-idf-sys

Rust bindings for ESP-IDF

Build

Features

`native`

`pio`

`binstart`

`libstart`

sdkconfig

(native builder only) Using cargo-idf to interactively modify ESP-IDF's `sdkconfig` file

(pio builder only) Using cargo-pio to interactively modify ESP-IDF's `sdkconfig` file

Build configuration

`esp_idf_sdkconfig_defaults`, `$ESP_IDF_SDKCONFIG_DEFAULTS`

`esp_idf_sdkconfig`, `$ESP_IDF_SDKCONFIG`

`esp_idf_tools_install_dir`, `$ESP_IDF_TOOLS_INSTALL_DIR`

`idf_path`, `$IDF_PATH` (native builder only)

`esp_idf_version`, `$ESP_IDF_VERSION` (native builder only)

`esp_idf_repository`, `$ESP_IDF_REPOSITORY` (native builder only)

`$ESP_IDF_GLOB[_XXX]_BASE` and `$ESP_IDF_GLOB[_XXX]_YYY`

`$ESP_IDF_PIO_CONF_XXX` (pio builder only)

`esp_idf_cmake_generator`, `$ESP_IDF_CMAKE_GENERATOR` (native builder only)

`mcu`, `$MCU`

`esp_idf_components`, `$ESP_IDF_COMPONENTS` (native builder only)

Example

Extra esp-idf components

Conditional compilation

More info

farbodpm/esp-idf-sys

Rust bindings for ESP-IDF

Build

Features

native

pio

binstart

libstart

sdkconfig

(native builder only) Using cargo-idf to interactively modify ESP-IDF's sdkconfig file

(pio builder only) Using cargo-pio to interactively modify ESP-IDF's sdkconfig file

Build configuration

esp_idf_sdkconfig_defaults, $ESP_IDF_SDKCONFIG_DEFAULTS

esp_idf_sdkconfig, $ESP_IDF_SDKCONFIG

esp_idf_tools_install_dir, $ESP_IDF_TOOLS_INSTALL_DIR

idf_path, $IDF_PATH (native builder only)

esp_idf_version, $ESP_IDF_VERSION (native builder only)

esp_idf_repository, $ESP_IDF_REPOSITORY (native builder only)

$ESP_IDF_GLOB[_XXX]_BASE and $ESP_IDF_GLOB[_XXX]_YYY

$ESP_IDF_PIO_CONF_XXX (pio builder only)

esp_idf_cmake_generator, $ESP_IDF_CMAKE_GENERATOR (native builder only)

mcu, $MCU

esp_idf_components, $ESP_IDF_COMPONENTS (native builder only)

Example

Extra esp-idf components

Conditional compilation

More info

`native`

`pio`

`binstart`

`libstart`

(native builder only) Using cargo-idf to interactively modify ESP-IDF's `sdkconfig` file

(pio builder only) Using cargo-pio to interactively modify ESP-IDF's `sdkconfig` file

`esp_idf_sdkconfig_defaults`, `$ESP_IDF_SDKCONFIG_DEFAULTS`

`esp_idf_sdkconfig`, `$ESP_IDF_SDKCONFIG`

`esp_idf_tools_install_dir`, `$ESP_IDF_TOOLS_INSTALL_DIR`

`idf_path`, `$IDF_PATH` (native builder only)

`esp_idf_version`, `$ESP_IDF_VERSION` (native builder only)

`esp_idf_repository`, `$ESP_IDF_REPOSITORY` (native builder only)

`$ESP_IDF_GLOB[_XXX]_BASE` and `$ESP_IDF_GLOB[_XXX]_YYY`

`$ESP_IDF_PIO_CONF_XXX` (pio builder only)

`esp_idf_cmake_generator`, `$ESP_IDF_CMAKE_GENERATOR` (native builder only)

`mcu`, `$MCU`

`esp_idf_components`, `$ESP_IDF_COMPONENTS` (native builder only)