These scripts are meant for the Digilent WaveForms software.
The Scripts are primarily developed for the Digilent AnalogDiscovery2 with the BNC Adapter.
This project is not associated with Digilent. I am not sponsored and/or a partner / employee of Digilent.
I also take no responsibility for damages that might occur when using these scripts. Use them at your own risk.
The scripts are nor meant for commercial purposes, I allow usage for commercial purposes, but won't give any guarantee.
- You need a WaveForms compatible device. I use a Digilent AnalogDiscovery2 with the BNC Adapter.
- Download the latest version of Digilent WaveForms from the official Website.
- Open WaveForms and open a Script Tab by choosing "Script" in the menu on the left side of the "Welcome"-Screen.
- Copy & Paste the content of the Script (depending on what script you want to use) in the Script editor.
- Follow the comments/instructions inside the script and setup the software and run it.
Current Scripts:
Capacitance.js- (NOT TESTED!) Is a script to automatically measure and calculate the capacitance of a unpolarized capacitor in an RC (Resistor-Capacitor) voltage divider.Inductance.js- Is a script to automatically measure and calculate the inductance of an inductor in an RL (Resistor-Inductor) voltage divider.
You can post issues and pull-requests, and while I will look at them and might fix some issues and accept pull requests, it is not a project I will take much care of. They are mostly written by me for me, so I will not modify them for a more general use case and I will most likely not take requests for scripts.
Feel free to fork the project and issue pull-requests if you think a script can be improved.