fellesverkstedet/Bark-beetle-parametric-toolpaths

Issues

• Suggested additions to code

  #82 opened 3 years ago by Jesse-vdp
  5

• Autosrting of cutout curves sometimes gets ruined

  #85 opened 2 years ago by JensDyvik
  2

• kill calc

  #81 opened 3 years ago by uomou
  4

• another Future version request

  #80 opened 3 years ago by uomou
  3

• Sometimes surfaces don't fully generate code when trying to 3D mill

  #62 opened 4 years ago by Siemenc
  5

• future bark beetle feature request

  #79 opened 3 years ago by uomou
  2

• Slow & incomplete 3D-milling - bug in surface 3d-mill component?

  #52 opened 5 years ago by Siemenc
  6

• Debugging Bark Beetle tricks

  #78 opened 3 years ago by uomou
  1

• Make a better trochoidal milling entry

  #71 opened 3 years ago by Siemenc
  1

• Easy Gallery to add & show images

  #69 opened 4 years ago by Siemenc
  5

• List matching bug in 3D mill

  #77 opened 3 years ago by Siemenc
  2

• Add key to explain preview colors of different toolpaths

  #73 opened 3 years ago by JackFelles
  7

• Roadmap for better a settings generator

  #75 opened 3 years ago by JensDyvik
  5

• UGS - Pause error caused by strange string output

  #76 opened 3 years ago by uomou
  9

• 3D milling incomplete curves, Rhino 5

  #68 opened 4 years ago by almowery
  7

• Pocket order needs to be checked

  #72 opened 4 years ago by Siemenc
  0

• Pocket doesn't cut in climb direction when using aluminium

  #70 opened 4 years ago by Siemenc
  0

• Added option to set Z zero bellow material + warning and better preview

  #67 opened 4 years ago by JensDyvik
  3

• can’t edit Custom start G-Code panel

  #66 opened 4 years ago by uomou
  2

• file type is sbp while disabled

  #65 opened 4 years ago by uomou
  3

• Sorting by control points / changing control points

  #60 opened 4 years ago by Siemenc
  2

• Incorporate Compression bit into Automatic settings

  #59 opened 4 years ago by Siemenc
  2

• Started work on next gen automill

  #64 opened 4 years ago by JensDyvik
  1

• No way to control startpoint for cutout?

  #54 opened 4 years ago by Siemenc
  1

• Postprocessor generates .sbp when it is set to gcode and vise versa

  #63 opened 4 years ago by Siemenc
  1

• How to generate Gcode?

  #61 opened 4 years ago by zohozer
  6

• Incorporate Export Button for the machine code

  #55 opened 5 years ago by Siemenc
  1

• The Rhino6 .gh file doesn't stream

  #58 opened 5 years ago by almowery
  5

• Solve endless curves inside curves using boundary surface

  #50 opened 6 years ago by Siemenc
  11

• Incorporate stream destination for all output codes

  #56 opened 5 years ago by Siemenc
  2

• Barkbeetle Rhino OSX

  #51 opened 5 years ago by Makershub
  5

• Incorporate Autosort as an extra option inside main definition?

  #36 opened 5 years ago by Siemenc
  1

• Postprocessor slower due to non-active components & clusters

  #53 opened 5 years ago by Siemenc
  1

• Potential speed enhancement: an easier+quicker align curves in same direction

  #49 opened 6 years ago by Siemenc
  3

• Filter geometry by working area

  #48 opened 6 years ago by Siemenc
  0

• Automill: Pockets at edge should overlap

  #47 opened 6 years ago by Siemenc
  0

• Automill detects straight curved surfaces as surfaces to be 3D milled

  #46 opened 6 years ago by Siemenc
  0

• Pockets below Z0 don't work (above Z0 they do). Should we automatically project them to 0 or give some kind of warning about this?

  #40 opened 6 years ago by Siemenc
  1

• Autotabbing only works for square pieces

  #45 opened 6 years ago by Siemenc
  0

• 3D milling: flip direction of curve so they start at highest point

  #44 opened 6 years ago by Siemenc
  2

• Pocket with curves inside that form an island get recognized as a curve inside a curve

  #39 opened 6 years ago by Siemenc
  3

• Firefly is needed when using the postprocessor component from the Bark beetle tab

  #43 opened 6 years ago by Siemenc
  1

• Cutout inside inside doesn't check for overlapping curves

  #42 opened 6 years ago by Siemenc
  0

• Detect too naoor edge pockets, ad instead add profile if possible? (copied from file)

  #32 opened 6 years ago by Siemenc
  0

• Cleaning up clusters: Switch to Rhino6?

  #41 opened 6 years ago by Siemenc
  2

• Incorporate offset pocket using Clipper

  #37 opened 6 years ago by Siemenc
  3

• Incorporate 3D tabs

  #38 opened 6 years ago by Siemenc
  0

• Add climb or conventional option to pocket (copied from file)

  #35 opened 6 years ago by Siemenc
  0

• Add separte interface window with HumanUI (Copied from file)

  #34 opened 6 years ago by Siemenc
  0

• Automaticcaly choose bit size? (copied from file)

  #33 opened 6 years ago by Siemenc
  0