/sftdyn

Self-hosted dyndns/dynamic DNS server and updater for bind

Primary LanguagePythonGNU General Public License v3.0GPL-3.0

sftdyn dynamic dns server

sftdyn is a minimalistic dynamic DNS server that accepts update requests via http or https and forwards them to a locally running DNS server via nsupdate -l. You can use it to easily update IPs of hosts in a domain whose IPs are not static and change to unpredictable addresses.

It lets you easily create a dyndns.org-like service, using your own DNS server, and can (probably) be used with your router at home.

Operation

  • You have a domain, e.g. sft.rofl, and a subdomain for dynamic entries, e.g. dyn.sft.rofl
  • The device whose IP address you want to store submits a https request to the sftdyn server containing a secret token, in order to update devicename.dyn.sft.rofl
  • From this, the sftdyn server knows the request origin IP
  • From the secret token, sftdyn can associate a hostname to update its DNS record (devicename.dyn.sft.rofl)
  • The request therfore updated an IP in your zone

Requirements

Setup Guide

sftdyn is for you if you host a DNS zone and can run a Python server so it updates the nameserver records. This guide assumes that you're using BIND, your zone is dyn.sft.rofl, and your server's IP is 12.345.678.90. Substitute the correct values for zone and IP as you use this guide.

Nameserver

bind has to be configured to serve the updatable zone.

You probably have a zonefile for sft.rofl already. You need to delegate dyn.sft.rofl to the local nameserver.

In the sft.rofl zone, add NS records to the new dynamic zone we're about to create:

# so the dyn.sft.rofl zone is delegated to the nameserver running sftdyn.
# likely you need the same NS record as for the sft.rofl zone itself.
dyn 30m IN NS yournameserver's_a_record

Now let's create the dyn.sft.rofl zone, where all the dynamic records will live. Somewhere in named.conf, add the new dynamic zone:

zone "dyn.sft.rofl" IN {
    type master;
    file "/etc/bind/dyn.sft.rofl.zone";
    journal "/var/cache/bind/dyn.sft.rofl.zone.jnl";
    update-policy local;
};

/var/cache/bind and /etc/bind/dyn.sft.rofl.zone must be writable for bind.

Create the empty zone file

cp /etc/bind/db.empty /etc/bind/dyn.sft.rofl.zone

We also can define a hostname to send the IP update requests to within the dyn.sft.rofl zone, or even use dyn.sft.rofl itself. @ means the zone name itself.

# within the dyn.sft.rofl zonefile, we set the IP for the dyn.sft.rofl host itself.
# this is the ip of the nameserver itself, where sftdyn is running.
# -> you can then send update requests to https://dyn.sft.rofl/...
@ 10m IN A 12.345.678.90
@ 10m IN AAAA some:ipv6::address

sftdyn server setup

To install sftdyn, use pip install sftdyn or ./setup.py install.

Launch it with python3 -m sftdyn [command-line options].

Configuration is by command-line parameters and conf file. A sample conf file is provided in etc/sample.conf. If no conf file name is provided, /etc/sftdyn/conf is used. Hostnames/update keys are specified in the conf file.

sftdyn should run under the same user as your DNS server, or it might not be able to update it properly. Alternatively, to run sftdyn as the user of your choice, see Advanced setup later in this article.

systemd service

To run sftdyn automatically, you can use a systemd service.

The sftdyn distribution package should automatically install sftdyn.service.

If you have to manually install it, use the example unit etc/sftdyn.service and copy it to /etc/systemd/system/sftdyn.service on the sftdyn host machine.

Enable the launch on boot and also start sftdyn now:

sudo systemctl enable --now sftdyn.service

Unencrypted operation

You can use sftdyn in plain HTTP mode. Your average commercial dynamic DNS provider provides a HTTP interface, so most routers only support that.

Somebody could grab your "secret url" with this and perform unintended updates of your record.

Encrypted operation

Because of the above reason, you should use HTTPS to keep your update url token secret. For that, your server needs a X.509 key and certificate. You can create those with let's encrypt, buy those somewhere, or create a self-signed one.

Reverse proxy

Your server running sftdyn may already have a webserver (e.g. nginx) to handle other web requests. It may already have proper certificates setup (e.g. with letsencrypt) - which you can just reuse for sftdyn.

If you have nginx, the following config block will redirect requests to dyn.sft.rofl to the sftdyn server.

Remember to use the X-Forwarded-For header in the sftdyn config (in get_ip) as the client ip!

server {
    server_name dyn.sft.rofl;

    // ...

    location / {
        # with this line, nginx relays the request to sftdyn
        proxy_pass http://localhost:8080/;

        # remember the original ip - we need to extract it in get_ip
        # in the sftdyn config then!
        proxy_set_header X-Forwarded-For $remote_addr;
        proxy_set_header Host            $host;
    }

    // ...
}

Alternatively, you can add the location block with location /dyn or something to some existing server block.

In any way, you can then submit requests to the regular https port since you send to nginx now. -> remove :4443 in the client requests.

Let's Encrypt

If you don't want to use a reverse proxy to terminate the tls connection, you can directly configure sftdyn to use the certificate. To use a certificate by Let's Encrypt directly in sftdyn:

# in sftdyn.conf:
key = "/etc/letsencrypt/live/host.name.lol/privkey.pem"
cert = "/etc/letsencrypt/live/host.name.lol/fullchain.pem"

Make sure the certificate is valid for the domain your sftdyn is getting requests for.

A https request to sftdyn to update an IP will then be secure™ (e.g. with curl).

Self-signed certificate

To generate server.key and a self-signed server.crt valid for 1337 days:

openssl genrsa -out server.key 4096
openssl req -new -key server.key -out server.csr
openssl x509 -req -days 1337 -in server.csr -signkey server.key -out server.crt
rm server.csr

Make sure you enter your server's domain name for Common Name (the hostname you'll use for querying sftdyn with clients.

A https request to sftdyn to update an IP will then be more secure™ than a globally valid certificate like from Let's Encrypt, but you'll need to transfer the server.crt to the device performing the request (e.g. with curl).

Client

The client is the device whose IP we want to update in the dynamic zone. Common clients are your plastic router at home that changes it's DSL IP address from time to time.

The client triggers the IP update at the sftdyn server, so your DNS then delivers the correct IP.

Plastic router

Cheap plastic routers often have built-in dynamic dns update support. Since sftdyn is not that well known, within the plastic router's web UI you need to select something like user-defined provider, and enter http://dyn.sft.rofl:8080/yourupdatekey as the update URL. Write random stuff as name/user name/password, since just the update URL is the secret alone (tested with my AVM Fritz!Box. YMMV). Most routers don't support HTTPS update requests (especially not with custom CA-cert, so you'll probably need HTTP.

If you set up sftdyn with let's encrypt, https may work - just test it :)

Request with curl

If you want to update the external IP of some NAT gateway (like home router, ...), and you have a machine in that network which can use curl, choose this client method.

If you use HTTPS with a let's encrypt certificate, curl will be happy to request with encryption

If you use a self-signed certificate, curl will refuse to talk to the server (because it obviously can't trust it without knowing it). To make curl trust the self-signed certificate:

  • Copy server.crt to the client, and use curl --cacert server.crt. Alternatively, to let curl ignore the security problem and just accept whatever it gets:
  • Use curl -k to ignore the error (Warning: see the security considerations below).

The result codes mean the following:

HTTP code Text Response interpretation
200 OK Update successful
200 UPTODATE Update unneccesary
403 BADKEY Unknown update key
500 FAIL Internal error (see the server log)
200 your ip Returned if no association key is provided
systemd timer

systemd timers are like cronjobs. Use them to periodically run the update query.

Create /etc/systemd/system/sftdynupdate.timer:

[Unit]
Description=SFTdyn dns updater

[Timer]
OnCalendar=*:0/15
Persistent=true

[Install]
WantedBy=timers.target

Create /etc/systemd/system/sftdynupdate.service:

[Unit]
Description=SFTdyn name update

[Service]
Type=oneshot
User=nobody
ExecStart=/usr/bin/env curl -f -s --cacert /path/to/server.crt https://dyn.sft.rofl:4443/yoursecretupdatekey

Activate the timer firing with:

sudo systemctl enable --now sftdyn.timer

Verify the timer is scheduled:

sudo systemctl list-timers

To manually trigger the update (e.g. for testing purposes):

sudo systemctl start sftdyn.service
Cronjob

Cronjobs are the legacy variant to periodically run a task, you could do this like this:

*/10 * * * * curl https://dyn.sft.rofl:4443/mysecretupdatekey

Advanced setup

Pre-generated keyfile

By default sftdyn uses a key auto-generated by bind, /var/run/named/session.key. The permissions of this file may be reset on startup, and could be too restrictive for sftdyn.

If you see errors such as these in journalctl -u sftdyn, it may indicate a permission issue with the keyfile:

; TSIG error with server: tsig indicates error
update failed: NOTAUTH(BADSIG)

An alternative approach is to use a pre-generated keyfile dedicated to sftdyn, which lets you have more control over the file permissions.

Create a new key

The example script below generates a keyfile in /etc/bind/keys/sftdyn.key, and changes the user/group ownership to bind:sftdyn. Modify as needed to best suit your specific setup.

b=$(dnssec-keygen -a hmac-sha512 -b 512 -n USER -K /tmp foo)
cat > /etc/bind/keys/sftdyn.key <<EOF
key "sftdyn" {
    algorithm hmac-sha512;
    secret "$(awk '/^Key/{print $2}' /tmp/$b.private)";
};
EOF
rm -f /tmp/$b.{private,key}
chown bind:sftdyn /etc/bind/keys/sftdyn.key # or whatever permissions
chmod 640 /etc/bind/keys/sftdyn.key
Include the key in named.conf
include "/etc/bind/keys/sftdyn.key";
Configure named zone to use the key
zone "dyn.sft.mx" IN {
    type master;
    file "/etc/bind/dyn.sft.mx.zone";
    journal "/var/cache/bind/dyn.sft.mx.zone.jnl";
    allow-update { key "sftdyn"; };
};
Change sftdyn configuration to use the key

Edit the nskeyfile option in the configuration file, by default located in /etc/sftdyn/conf:

nskeyfile = "/etc/bind/keys/sftdyn.key"

About

This software was written after the free dyndns.org service was shut down. After a week or so of using plain nsupdate, we were annoyed enough to decide to write this.

The main goal of this tool is to stay as minimal as possible; for example, we deliberately didn't implement a way to specify the hostname or IP that you want to update; just a simple secret update key is perfectly good for the intended purpose. If you feel like it, you can make the update key look like a more complex request; every character is allowed. Example: host=test.sft.rofl,key=90bbd8698198ea76.

The conf file is interpreted as python code, so you can do arbitrarily complex stuff there.

Security considerations

  • When using HTTP, or if your server.key has been stolen or broken, an eavesdropper can steal your update key, and use that to steal your domain name.
  • When using HTTPS with curl -k, a man-in-the-middle can steal your update key.
  • When using HTTPS with a paid certificate, a man-in-the-middle with access to a CA can steal your update key (no problem for government agencies, but this is pretty unlikely to happen).
  • When using HTTPS with a self-signed certificate and curl --cacert server.crt, no man-in-the-middle can steal your update key.

sftdyn is pretty minimalistic, and written in python, so it's unlikely to contain any security vulnerabilities. The python ssl and http modules are used widely, and open-source, so there should be no security vulnerabilities there.

Somebody who knows a valid udpate key could semi-effectively DOS your server by spamming update requests from two different IPs. For each request, nsupdate would be launched and your zone file updated.

Development

For us, the project is feature-complete, it has everything that we currently need. If you actually did implement a useful feature, please send a pull request; We'd be happy to merge it.

If you have any requests, ideas, feedback or bug reports, are simply filled with pure hatred, or just need help getting the damn thing to run, join our chatroom and just ask:

The license is GNU GPLv3 or higher.