Issues
- 1
Memory Leak
#76 opened by alanj853 - 4
Possible to kill port
#58 opened by ConnorRigby - 1
elxir ale is build for different host?
#72 opened by ychaudhari7 - 5
GPIO support active_low signals
#65 opened by mdinardo - 1
- 8
- 3
- 2
- 10
Wire Protocol: 1-wire
#23 opened by coop - 10
- 6
Concurrent reads crash the Port
#53 opened by sandromehic - 2
Change direction of a GPIO pin.
#57 opened by amol-c - 1
HC-SR04 Kernel Module
#51 opened by idahogray - 7
hc-sr04 distance sensor
#50 opened by idahogray - 2
- 4
- 1
Avoid initial message for GPIO interrupt pins
#24 opened by wsmoak - 2
Increase i2c max buffer size to system default.
#32 opened by jimsynz - 4
Cross Compilation on Mac fails
#35 opened by lucca65 - 8
different ei.h paths
#31 opened by BenBals - 4
Warning when compiling on Raspberry Pi
#29 opened by krisalyssa - 1
Does it work with an arduino?
#26 opened by grandafrato - 5
Reading from GPIO on a Raspberry Pi 3 Model B
#16 opened by hzeus - 1
- 3
Allow larger I2C buffers than 32 bytes
#20 opened by artob - 1
Reading raw binary digital values
#17 opened by cloud8421 - 1
fast interrupt crashing port
#14 opened by mobileoverlord - 4
Missing Erlang Header Files
#11 opened by zmackie - 1
Add helper to scan the I2C bus for devices
#10 opened by fhunleth - 4
Trying to compile on Mac
#9 opened by gordonbisnor - 15
- 6
Compile Error on Raspberry Pi
#2 opened by infiniteNIL - 3
Can't load library when elixir_ale is included as dependency in a project
#3 opened by ChristopheBelpaire - 6