fiberpunk1/Beam-ESP32

Issues

• Dead project??

  #25 opened 8 months ago by FrankHovis
  0

• Error reference to 'File' is ambiguous

  #24 opened 10 months ago by Gonzagao
  0

• Debug information is sent to the printer serial port.

  #23 opened a year ago by wbuczkowski
  0

• Node confused by "G29 L0" Gcode command, thinks it means that the print is finished

  #9 opened a year ago by nuevotango42
  9

• Problem with UI

  #18 opened a year ago by RickzFPV
  2

• Pause, Cancel and Resume button freezes communication

  #22 opened a year ago by autagi
  1

• Filelist web interface doesn't update

  #21 opened a year ago by autagi
  0

• Docker Image

  #20 opened a year ago by Gh0st-drive
  0

• Incorrect year & name for Prusa MK3s firmware (not 2023-02-02-2009-PRUSA-MK3S when following the guide links)

  #19 opened a year ago by vtjballeng
  1

• Bed not heated up on Anycubic vyper when starting via fiberpunk beam

  #14 opened 2 years ago by volkmarnissen
  3

• Support for uploading files through API using filename instead of path

  #13 opened a year ago by roady001
  1

• Entry Point Not Found

  #17 opened 2 years ago by OtPot
  0

• Mac version

  #16 opened 2 years ago by OtPot
  0

• Prusa MK3s+: Node not recognizing a stopped / cancelled print and requires reboot

  #15 opened 2 years ago by leffnasty
  0

• Status API not responding correctly

  #10 opened 2 years ago by gitley
  1

• Feature Request: Upload file to Node via Prusaclicer

  #8 opened 2 years ago by volkmarnissen
  6

• Unable to Mount with Printer Offline

  #3 opened 2 years ago by jneilliii
  5

• Display more helpful error messages

  #7 opened 2 years ago by ammgws
  1

• No SD-Card works in the Node for MK3s - every time "Not Found SD Card"

  #5 opened 2 years ago by aboutchris
  1

• [Feature Request] alternative power supply (24v option)

  #6 opened 2 years ago by Getn67
  0