Heads up

Almost none of this has really been tested and it's not battle hardened or idiot proof. It's very likely it won't build first time. If it doesn't don't get mad. Open an issue instead.

Like everything created by random people messing around in their spare time this works for me by your mileage may vary.

Getting Started

Building

Assuming you're on a recent Debian or Debian-like system you should only need to install these packages:

build-essential
file
wget
cpio
python
unzip
rsync
bc
git

For the first build you probably need to pull in the submodules.

make bootstrap
make

After that running make alone should be enough.

There is a target called buildindocker that should potentially allow you to build on OSX or Windows but it hasn't really been tested.

Getting access the u-boot prompt

The ch340e usb->uart bridge used for the serial console doesn't like the sudden change in baud rate when the board is booting and will inject some junk.

To stop that breaking auto boot instead of stopping auto boot and going to the u-boot prompt on any input u-boot is configured to wait for the string "bzzbzz" instead.

u-boot will give you 10 seconds to enter "bzzbzz" before auto booting. This is should give you enough time to plug in the usb, have the serial port register and repeatedly mash "bzzbzzbzz" on your keyboard.

SSH Access

br2autosshkey will create an ssh key and grant access to sudo for a user called "bzzbzz". The public and private keys for the user will be in buildroot/output/sshkeys/bzzbzz. You can use the private key to login via SSH by doing something like ssh -i buildroot/output/sshkeys/bzzbzz bzzbzz@<board ip>.

Keep in mind this is only intended to be a little bit better than a hardcoded password.

Configuration via beecfg

TODO

Adding apps, your own code, doing useful stuff

The first thing you should do is to create your own fork of this repo. Then create yourself a project branch for the project you're working on so that you can update master at any time and not have merge conflicts.

Adding your own apps to the firmware

A skeleton buildroot external directory is provided in br2apps for you to add your packages into.

App container

TBD

Updating/recovery using the rescue image

TODO

Boring technical details

You probably don't need to know this stuff...

Overlays

Overlay naming convention

overlays : function_pingroup
interfaces : interface_on_function/pin
accessories: accessory_on_function/pin

Loading the kernel without any overlays

The FIT has it's default configuration linked to the breadbee config so just loading the FIT into memory and pointing bootm at it should be enough. If needed you can specify the configuration after the load address.

sf probe; if sf read ${loadaddr} 0x80000 0x300000; then bootm ${loadaddr}#<boardtype>; fi

Loading the kernel with overlays

u-boot allows loading multiple configurations defined in the FIT and applying them in order. We use this to load the base configuration for the type of board (currently breadbee or breadbee_crust) and load configurations with device tree overlays to do the configuration.

sf probe; if sf read ${loadaddr} 0x80000 0x300000; then bootm ${loadaddr}#<boardtype>#<overlay1>#<overlay2>; fi

Low-level u-boot fun

Supplied u-boot environment variables

bb_boardtype - During board init we check the chip rev register and set this to either breadbee if you have an MSC313e or breadbee_crust if you have the older MSC313 (without an e).

MAC addresses

If your kernel DT supplies aliases for ethernet0 through to ethernet3 u-boot will insert MAC address based on the chip's unique ID so that they are fixed and you don't need to go crazy trying to work out why you can't get an address from your DHCP server anymore after rebooting 100 or times.

Updating parts of the firmware

Run make run_tftpd to get a local tftp server. You will need permission to use sudo and may need to open port 69 on the host machine. Use setenv serverip <ip address> to point at your tftp server.

Replacing the kernel and rootfs via tftp:

if dhcp nor-16.img; then; sf probe; sf erase 0x80000 0xf80000; sf write 0x22080000 0x80000 0xf80000; fi

Replacing just the kernel

if dhcp kernel.fit.img; then;sf probe;sf erase 0x80000 0x300000;sf write 0x22000000 0x80000 0x300000;fi

Replacing just the rootfs

if dhcp nor-16.img; then; sf probe; sf erase 0x380000 0xc80000; sf write 0x22380000 0x380000 0xc80000; fi

Replacing u-boot

if dhcp nor-16.img; then; sf probe; sf erase 0x20000 0x50000; sf write 0x22020000 0x20000 0x50000; fi

This will replace the SPL as well as u-boot meaning you won't be able to load u-boot via ymodem if it fails. Use with care

if dhcp nor-16.img; then; sf probe; sf erase 0x10000 0x60000; sf write 0x22010000 0x10000 0x60000; fi

Replacing everything

Don't do this unless you have a way to reflash u-boot if it gets broken!

if dhcp nor-16.img; then; sf probe; sf erase 0x0 0x1000000; sf write 0x22000000 0x0 0x1000000; fi

Booting the RAM only rescue image

from flash

sf probe; if sf read ${loadaddr} 0xd00000 0x300000; then bootm ${loadaddr}; fi

via tftp

if dhcp rescue.fit.img; then bootm; fi

fifteenhex/breadbee_buildroot