/raven-ruby

Raven is a Ruby client for Sentry (getsentry.com)

Primary LanguageRubyApache License 2.0Apache-2.0

Raven-Ruby

Gem Version Build Status Coverage Status

A client and integration layer for the Sentry error reporting API.

Requirements

We test on Ruby MRI 1.8.7, 1.9.3 and 2.0.0. Rubinius and JRuby support is experimental.

Installation

gem "sentry-raven" #, :github => "getsentry/raven-ruby"

Usage

The minimum configuration require setting the SENTRY_DSN with value found on your Sentry project settings page. It should resemble something like https://public:secret@app.getsentry.com/9999. See Configuration for configuration methods, and other options.

Many implementations will automatically capture uncaught exceptions (such as Rails, Sidekiq or by using the Rack middleware). If you catch those exceptions yourself, but still want to report on them, see section Capturing Events.

Rails 3 or 4

In Rails 3 or 4 all uncaught exceptions will be automatically reported under most situations.

You'll still want to ensure you've disabled anything that would prevent errors from being propagated to the Raven::Rack middleware:

Disable ActionDispatch::ShowExceptions:

config.action_dispatch.show_exceptions = false

Delayed::Job

No extra configuration required. Usage of delayed-plugins-raven gem is deprecated.

Rails 2

No support for Rails 2 yet, but it is being worked on.

Rack

Add use Raven::Rack to your config.ru (or other rackup file).

Sinatra

Like any other Rack middleware, add use Raven::Rack to your Sinatra app.

Sidekiq

Raven includes Sidekiq middleware which takes care of reporting errors that occur in Sidekiq jobs. To use it, just require the middleware by doing

require 'raven/sidekiq'

after you require Sidekiq. If you are using Sidekiq with Rails, just put this require somewhere in the initializers.

Capturing Events

Many implementations will automatically capture uncaught exceptions (such as Rails, Sidekiq or by using the Rack middleware). Sometimes you may want to catch those exceptions, but still report on them.

Several helpers are available to assist with this.

Capture Exceptions in a Block

Raven.capture do
  # capture any exceptions which happen during execution of this block
  1 / 0
end

Capture an Exception by Value

begin
  1 / 0
rescue ZeroDivisionError => exception
  Raven.capture_exception(exception)
end

Additional Context

Additional context can be passed to the capture methods.

Raven.capture_message "My event",
  logger: 'logger',
  extra: {
    my_custom_variable: 'value'
  },
  tags: {
    environment: 'production'
  }

The following attributes are available:

  • logger: the logger name to record this event under
  • level: a string representing the level of this event (fatal, error, warning, info, debug)
  • server_name: the hostname of the server
  • tags: a mapping of tags describing this event
  • extra: a mapping of arbitrary context

Providing Request Context

Most of the time you're not actually calling out to Raven directly, but you still want to provide some additional context. This lifecycle generally constists of something like the following:

  • Set some context via a middleware (e.g. the logged in user)
  • Send all given context with any events during the request lifecycle
  • Cleanup context

There are three primary methods for providing request context:

# bind the logged in user
Raven.user_context email: 'foo@example.com'

# tag the request with something interesting
Raven.tags_context interesting: 'yes'

# provide a bit of additional context
Raven.extra_context happiness: 'very'

Additionally, if you're using Rack (without the middleware), you can easily provide context with the rack_context helper:

Raven.rack_context(env)

If you're using the Rack middleware, we've already taken care of cleanup for you, otherwise you'll need to ensure you perform it manually:

Raven::Context.clear!

Note: the rack and user context will perform a set operation, whereas tags and extra context will merge with any existing request context.

Authlogic

When using Authlogic for authentication, you can provide user context by binding to session after_persisting and after_destroy events in user_session.rb:

class UserSession < Authlogic::Session::Base
  # events binding
  after_persisting :raven_set_user_context
  after_destroy :raven_clear_user_context

  def raven_set_user_context
    Raven.user_context( { 'id' => self.user.id, 'email' => self.user.email, 'username' => self.user.username } )
  end

  def raven_clear_user_context
    Raven.user_context({})
  end
end

Configuration

SENTRY_DSN

After you complete setting up a project, you'll be given a value which we call a DSN, or Data Source Name. It looks a lot like a standard URL, but it's actually just a representation of the configuration required by Raven (the Sentry client). It consists of a few pieces, including the protocol, public and secret keys, the server address, and the project identifier.

With Raven, you may either set the SENTRY_DSN environment variable (recommended), or set your DSN manually in a config block:

Raven.configure do |config|
  config.dsn = 'http://public:secret@example.com/project-id'
end

Environments

By default, events will be sent to Sentry in all environments. If you do not wish to send events in an environment, we suggest you unset the SENTRY_DSN variable in that environment.

Alternately, you can configure Raven to run only in certain environments by configuring the environments whitelist. For example, to only run Sentry in production:

Raven.configure do |config|
  config.environments = %w[ production ]
end

Sentry automatically sets the current environment to RAILS_ENV, or if it is not present, RACK_ENV. If you are using Sentry outside of Rack or Rails, you'll need to set the current environment yourself:

Raven.configure do |config|
  config.current_environment = 'my_cool_environment'
end

Excluding Exceptions

If you never wish to be notified of certain exceptions, specify 'excluded_exceptions' in your config file.

In the example below, the exceptions Rails uses to generate 404 responses will be suppressed.

Raven.configure do |config|
  config.excluded_exceptions = ['ActionController::RoutingError', 'ActiveRecord::RecordNotFound']
end

You can find the list of exceptions that are excluded by default in Raven::Configuration::IGNORE_DEFAULT. Remember you'll be overriding those defaults by setting this configuration.

Tags

You can configure default tags to be sent with every event. These can be overridden in the context or event.

Raven.configure do |config|
  config.tags = { environment: Rails.env }
end

SSL Verification

By default SSL certificate verification is disabled in the client. This choice was made due to root CAs not being commonly available on systems. If you'd like to change this, you can enable verification by passing the ssl_verification flag:

Raven.configure do |config|
  config.ssl_verification = true
end

Asynchronous Delivery

When an error occurs, the notification is immediately sent to Sentry. Raven can be configured to send notifications asynchronously:

Raven.configure do |config|
  config.async = lambda { |event|
    Thread.new { Raven.send(event) }
  }
end

This example uses a thread, but other tools can be used (GirlFriday, Resque, Sidekiq, etc...) as long as the event argument is eventually passed to Raven.send.

Logging

You can use any logger with Raven - just set config.logger. Raven respects logger levels.

logger = ::Logger.new(STDOUT)
logger.level = ::Logger::WARN

Raven.configure do |config|
  config.logger = logger
end

If you are using Rails, Raven will default to using Rails.logger as the logger.

Encoding

While unlikely that you'll need to change it, by default Raven compresses outgoing messages with gzip. This has a slight impact on performance, but due to the size of many Ruby stacktrace it's required for the serve to accept the content.

To disable gzip, set the encoding to 'json':

Raven.configure do |config|
  config.encoding = 'json'
end

Silencing the ready message

Upon start, Raven will write the following message to the log at the INFO level:

** [out :: hostname.example.com] I, [2014-07-22T15:32:57.498368 #30897]  INFO -- : ** [Raven] Raven 0.9.4 ready to catch errors"

You can turn off this message by passing true to Raven.configure

Raven.configure(true) do |config|
   ...
end

Sanitizing Data (Processors)

If you need to sanitize or pre-process (before its sent to the server) data, you can do so using the Processors implementation. By default, a single processor is installed (Raven::Processor::SanitizeData), which will attempt to sanitize keys that match various patterns (e.g. password) and values that resemble credit card numbers.

To specify your own (or to remove the defaults), simply pass them with your configuration:

Raven.configure do |config|
  config.processors = [Raven::Processor::SanitizeData]
end

Testing Your Configuration

To ensure you've setup your configuration correctly we recommend running the included rake task::

$ rake raven:test[https://public:secret@app.getsentry.com/3825]
Client configuration:
-> server: https://app.getsentry.com
-> project_id: 3825
-> public_key: public
-> secret_key: secret

Sending a test event:
-> event ID: 033c343c852b45c2a3add98e425ea4b4

Done!

A couple of things to note:

  • This won't test your environment configuration. The test CLI forces your configuration to represent itself as if it were running in the production env.
  • If you're running within Rails (or anywhere else that will bootstrap the rake environment), you should be able to omit the DSN argument.

Contributing

Bootstrap

$ bundle install

Running the test suite

$ rake spec

Resources