flo199213/Hoverboard-Firmware-Hack-Gen2

Issues

• No compiling , error in adc

  #15 opened 4 years ago by centiane
  5

• Error flashing with ST-LINK utility

  #12 opened 5 years ago by JMarceloCasanova
  4

• Batt voltage when powered on ?

  #29 opened a year ago by Fish-man134
  0

• RC Receiver

  #26 opened 2 years ago by WolfgangDerVollstrecker
  6

• By loading code in to visual studio, coming up error from Ln34.

  #28 opened a year ago by Vorlovskis
  0

• ADC control with two potentiometers

  #14 opened 5 years ago by vischio96
  4

• #include "arm_math.h"

  #2 opened 6 years ago by drbytes
  9

• Restore hoverboard

  #5 opened 6 years ago by gaucho1978
  6

• done here: https://github.com/gaucho1978/CHEAP-LAWNMOWER-ROBOT-FROM-HOVERBOARD/blob/master/README.md

  #27 opened 2 years ago by weiminshen99
  1

• Please add a makefile for my online compiler :-)

  #10 opened 5 years ago by RoboDurden
  24

• ARM MM32SPIN06 YS-SXT-4.2 - HOVER-1 Board

  #21 opened 3 years ago by landgrant
  3

• no movement

  #25 opened 2 years ago by Windaube
  1

• Compiling error in Keil project

  #19 opened 3 years ago by rohitsahu7
  3

• Hoverboard.axf not found

  #3 opened 6 years ago by bugiworks
  14

• [NOT AN ISSUE] Newer boards design with GD32F130C6T6

  #24 opened 3 years ago by krisstakos
  1

• Pin-out for ADC (potentiometer)

  #23 opened 3 years ago by Kipyeah
  1

• Anything bldc motor?

  #22 opened 3 years ago by nazariiixa
  0

• The IMU appears to be a BMI120, not an MPU6050 like the schematic says

  #20 opened 3 years ago by qwandor
  3

• How to flash?

  #17 opened 4 years ago by casperround
  6

• Split Board "Jiaan" with GD32F130C6

  #13 opened 5 years ago by t-oster
  3

• Mention "TT-SD2.2" in docs

  #9 opened 5 years ago by gnbl
  2

• Split GD32F103 board?

  #11 opened 5 years ago by abrarakram19
  2

• CPU core speed 48 MHz instead of 72 MHz?

  #8 opened 5 years ago by chunter1
  1

• Experience using this firmware

  #7 opened 5 years ago by teixeluis
  1

• Use Pwm or ppm input, avoiding the need of arduino

  #4 opened 6 years ago by gaucho1978
  1

• Updates

  #1 opened 6 years ago by drbytes
  1