fluorumlabs/sonictrain-old

Issues

• D108 Normal signals too hot for FV-1

  #29 opened 9 years ago
  0

• D108/D709 3V3 regulator is hot

  #28 opened 9 years ago
  0

• D108 Rotary switch needs some debouncing

  #27 opened 9 years ago
  0

• D108 Pin T0 of FV-1 should be tied to GND instead of 3V3

  #26 opened 9 years ago
  0

• M913: Blue LED is brighter then Red LED

  #25 opened 9 years ago
  0

• M101: Polarity protection diode bridge is getting hot (50ºC)

  #24 opened 9 years ago
  0

• Current Monitor

  #22 opened 9 years ago
  1

• M101: Add current limiting to power supply lines

  #21 opened 9 years ago
  0

• A405: Output gain should go to +6 dB instead of 0 dB

  #20 opened 9 years ago
  0

• A405: Diodes should be connected to ground instead of OpAmp-

  #19 opened 9 years ago
  0

• M2201 Noise if no source is connected to input

  #6 opened 9 years ago
  0

• M2201 and M2301 LED volume indicators should be brighter

  #5 opened 9 years ago
  0

• M2301 Output is too hot, unity gain position is unknown

  #4 opened 9 years ago
  0

• M2101: (Used) blue LED is way brighter than red LED

  #2 opened 9 years ago
  0

• Wrong DC in connector pinout (M2101)

  #1 opened 9 years ago
  0