"Valuable secure Privacy cryptocurrency"
| Website |Block Explorer |
- Folm Coin - Masternode
- New PHI1612 PoW/MN algorithm thanks for 216k155
- MN Reward
The Folmcore Project is a decentralized peer-to-peer banking financial platform, created under an open source license, featuring a built-in cryptocurrency, end-to-end encrypted messaging and decentralized marketplace. The decentralized network aims to provide anonymity and privacy for everyone through a simple user-friendly interface by taking care of all the advanced cryptography in the background.
| Specification | Value |
|---|---|
| Total Blocks | 8,409,600 |
| Block Size | 4MB |
| Block Time | 120s |
| PoW Reward | 30 FLM |
| Masternode Requirement | 5,000 FLM |
| Masternode Reward | 15 FLM First Year - 20 FLM Second Year |
| Port | 53656 |
| RPC Port | 53654 |
| Masternode Port | 53656 |
| Year | PoW Reward | MN Reward |
|---|---|---|
| 1 | 30 FLM |
15 FLM |
| 2 | 20 FLM |
20 FLM |
| 3 | 10 FLM |
15 FLM |
| 4 | 5 FLM |
10 FLM |
| 5 | 2.5 FLM |
7.5 FLM |
The first step is to install the mingw-w64 cross-compilation tool chain. Due to different Ubuntu packages for each distribution and problems with the Xenial packages the steps for each are different.
Common steps to install mingw32 cross compiler tool chain:
sudo apt install g++-mingw-w64-x86-64
Ubuntu Xenial 16.04 and Windows Subsystem for Linux
sudo apt install software-properties-common
sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu zesty universe"
sudo apt update
sudo apt upgrade
sudo update-alternatives --config x86_64-w64-mingw32-g++ # Set the default mingw32 g++ compiler option to posix.
Once the tool chain is installed the build steps are common:
Note that for WSL the folm Core source path MUST be somewhere in the default mount file system, for example /usr/src/folm, AND not under /mnt/d/. If this is not the case the dependency autoconf scripts will fail. This means you cannot use a directory that located directly on the host Windows file system to perform the build.
The next three steps are an example of how to acquire the source in an appropriate way.
cd /usr/src
sudo git clone https://github.com/folm/folm.git
sudo chmod -R a+rw folm
Once the source code is ready the build steps are below.
PATH=$(echo "$PATH" | sed -e 's/:\/mnt.*//g') # strip out problematic Windows %PATH% imported var
cd depends
make HOST=x86_64-w64-mingw32 -j4
cd ..
./autogen.sh # not required when building from tarball
CONFIG_SITE=$PWD/depends/x86_64-w64-mingw32/share/config.site
./configure --prefix=`pwd`/depends/x86_64-w64-mingw32 --disable-tests
make HOST=x86_64-w64-mingw32 -j4
sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev
sudo apt-get install software-properties-common
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev
# If you want to build the Qt GUI:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler
git clone https://github.com/folm/folm --recursive
cd folm
# Note autogen will prompt to install some more dependencies if needed
./autogen.sh
./configure
make -j4
The commands in this guide should be executed in a Terminal application.
The built-in one is located in /Applications/Utilities/Terminal.app.
Install the OS X command line tools:
xcode-select --install
When the popup appears, click Install.
Then install Homebrew.
brew install cmake automake berkeley-db4 libtool boost --c++11 --without-single --without-static miniupnpc openssl pkg-config protobuf qt5 libevent imagemagick --with-librsvg
NOTE: Building with Qt4 is still supported, however, could result in a broken UI. Building with Qt5 is recommended.
-
Clone the folm source code and cd into
folmgit clone --recursive https://github.com/folm/folm.git cd folm -
Build Folm Core:
Configure and build the headless folm binaries as well as the GUI (if Qt is found).
You can disable the GUI build by passing
--without-guito configure../autogen.sh ./configure make -
It is recommended to build and run the unit tests:
make check
Then you can either run the command-line daemon using src/folmd and src/folm-cli, or you can run the Qt GUI using src/qt/folm-qt
For in-depth description of Sparknet and how to use Folm for interacting with contracts, please see sparknet-guide.
Folmcore is GPLv3 licensed.
The master branch is regularly built and tested, but is not guaranteed to be
completely stable. Tags are created
regularly to indicate new official, stable release versions of Folm.
The contribution workflow is described in CONTRIBUTING.md.
Testing and code review is the bottleneck for development; we get more pull requests than we can review and test on short notice. Please be patient and help out by testing other people's pull requests, and remember this is a security-critical project where any mistake might cost people lots of money.
Developers are strongly encouraged to write unit tests for new code, and to
submit new unit tests for old code. Unit tests can be compiled and run
(assuming they weren't disabled in configure) with: make check. Further details on running
and extending unit tests can be found in /src/test/README.md.
There are also regression and integration tests of the RPC interface, written
in Python, that are run automatically on the build server.
These tests can be run (if the test dependencies are installed) with: qa/pull-tester/rpc-tests.py
Changes should be tested by somebody other than the developer who wrote the code. This is especially important for large or high-risk changes. It is useful to add a test plan to the pull request description if testing the changes is not straightforward.