fs2-http
Minimalistic yet powerful http client and server with scala fs2 library.
Overview
fs2-http is a simple client and server library that allows you to build http clients and servers using scala fs2. The aim of fs2-http is to provide simple and reusable components that enable fast work with various http protocols.
All the code is fully asynchronous and non-blocking. Thanks to fs2, this comes with back-pressure and streaming support.
fs2-http was built by compiling the internal projects Spinoco uses for building its product, where the server side is completely implemented in fs2.
Currently the project only has three dependencies: fs2, scodec and shapeless. As such you are free to use this with any other functional library, such as scalaz or cats.
Features
- HTTP 1.1 Client (request/reply, websocket, server-side-events) with SSL support
- HTTP 1.1 Server (request/reply, routing, websocket, server-side-events)
- HTTP Chunked encoding
SBT
Add this to your sbt build file :
libraryDependencies += "com.spinoco" %% "fs2-http" % "0.1.6"
Dependencies
version | scala | fs2 | scodec | shapeless |
---|---|---|---|---|
0.1.6 | 2.11, 2.12 | 0.9.4 | 1.10.3 | 2.3.2 |
0.1.4 | 2.11, 2.12 | 0.9.4 | 1.10.3 | 2.3.2 |
0.1.3 | 2.11, 2.12 | 0.9.2 | 1.10.3 | 2.3.2 |
Usage
Throughout this usage guide, the following imports are required in order for you to be able to run the examples test:console:
import fs2._
import fs2.util.syntax._
import spinoco.fs2.http
import http._
import http.websocket._
import spinoco.protocol.http.header._
import spinoco.protocol.http._
import spinoco.protocol.http.header.value._
HTTP Client
Currently fs2-http supports HTTP 1.1 protocol and allows you to connect to server with either http:// or https:// scheme.
A simple client that requests https page body data with the GET method from https://github.com/Spinoco/fs2-http
may be constructed, for example, as:
http.client[Task]().flatMap { client =>
val request = HttpRequest.get[Task](Uri.https("github.com", "/Spinoco/fs2-http"))
client.request(request).flatMap { resp =>
Stream.eval(resp.bodyAsString)
}.runLog.map {
println
}
}.unsafeRun()
The above code snippet only "builds" the http client, resulting in fs2.Task
that will be evaluated once run (using unsafeRunAsync()
).
The line with Stream.eval(resp.bodyAsString)
on it actually evaluates the consumed body of the response. The body of the
response can be evaluated strictly (meaning all output is first collected and then converted to the desired type), or it can be streamed (meaning it will be converted to the desired type as it is received from the server). A streamed body is accessible as resp.body
.
Requests to the server are modeled with HttpRequest[F], and responses are modeled as HttpResponse[F]. Both of them share several helpers to help you work easily with the body.
There is also a simple way to sent (stream) arbitrary data to server. It is easily achieved by modifying the request accordingly:
val stringStream: Stream[Task, String] = ???
implicit val encoder = StreamBodyEncoder.utf8StringEncoder[Task]
HttpRequest.get(Uri.https("github.com", "/Spinoco/fs2-http"))
.withMethod(HttpMethod.POST)
.withStreamBody(stringStream)
In the example above the request is build as such, to ensure that when run by the client it will consume stringStream
and send it with PUT request as utf8 encoded body to server.
WebSocket
fs2-http has support for websocket clients (RFC 6455). A websocket client is built with the following construct:
def wsPipe: Pipe[Task, Frame[String], Frame[String]] = { inbound =>
val output = time.awakeEvery[Task](1.second).map { dur => println(s"SENT $dur"); Frame.Text(s" ECHO $dur") }.take(5)
inbound.take(5).map { in => println(("RECEIVED ", in)) }
.mergeDrainL(output)
}
http.client[Task]().flatMap { client =>
val request = WebSocketRequest.ws("echo.websocket.org", "/", "encoding" -> "text")
client.websocket(request, wsPipe).run
}.unsafeRun()
The above code will create a pipe that receives websocket frames and expects the server to echo them back. As you see,
there is no direct access to response or body, instead websockets are always supplied with fs2 Pipe
to send and receive data.
This is in fact quite a powerful construct that allows you to asynchronously send and receive data to/from server over http/https with full back-pressure support.
Websockets use Frame\[A\]
to send and receive data. Frame is used to tag a given frame as binary or text. To encode/decode A
the scodec.Encoder
and scodec.Decoder
is used.
HTTP Server
fs2-http supports building simple yet fully functional HTTP servers. The following construct builds a very simple echo server:
def service(request: HttpRequestHeader, body: Stream[Task,Byte]): Stream[Task,HttpResponse[Task]] = {
if (request.path != Uri.Path / "echo") Stream.emit(HttpResponse(HttpStatusCode.Ok).withUtf8Body("Hello World"))
else {
val ct = request.headers.collectFirst { case `Content-Type`(ct) => ct }.getOrElse(ContentType(MediaType.`application/octet-stream`, None, None))
val size = request.headers.collectFirst { case `Content-Length`(sz) => sz }.getOrElse(0l)
val ok = HttpResponse(HttpStatusCode.Ok).chunkedEncoding.withContentType(ct).withBodySize(size)
Stream.emit(ok.copy(body = body.take(size)))
}
}
http.server(new InetSocketAddress("127.0.0.1", 9090))(service).run.unsafeRun()
As you see the server creates a simple Stream[F,Unit]
that, when run, will bind itself to 127.0.0.1 port 9090 and will serve the results of the service
function.
The service function is defined as (HttpRequestHeader, Stream[F, Body]) => Stream[F, HttpResponse[F]
and allows you to perform arbitrary functionality, all wrapped in fs2.Stream
.
Writing a server service function manually may not be fun and may result in unreadable and hard to maintain code. As such the last component of fs2-http is server routing.
HTTP Server Routing
Server routing is a micro-dsl language to allow fast monadic composition of a parser, that is essentially a function (HttpRequestHeader, Stream[F, Body]) => Either[HttpResponse[F], Stream[F, HttpResponse[F]]
where on the right side there is the result when the parser matches, and on the left side there is the response when the parser fails to match.
Thanks to the parser's ability to compose, you can build quite complex routing constructs, that remain readable:
import spinoco.fs2.http.routing._
import shapeless.{HNil, ::}
route[Task] ( choice(
"example1" / "path" map { case _ => ??? }
, "example2" / as[Int] :/: as[String] map { case int :: s :: HNil => ??? }
, "example3" / body.as[Foo] :: choice(Post, Put) map { case foo :: postOrPut :: HNil => ??? }
, "example4" / header[`Content-Type`] map { case contentType => ??? }
, "example5" / param[Int]("count") :: param[String]("query") map { case count :: query :: HNil => ??? }
, "example6" / eval(someEffect) map { case result => ??? }
))
Here the choice indicates that any of the supplied routes may match, starting with the very first route. Instead of ??? you may supply any function producing the Stream[Task, HttpResponse[Task]]
, that will be evaluated when the route will match.
The meaning of the individual routes is as follows:
- example1 : will match path "/example1/path"
- example2 : will match path "/example2/23/some_string" and will produce 23 :: "some_string" :: HNil to map
- example3 : will match path "/example3" and will consume body to produce
Foo
class. Map is supplied with Foo :: HttpMethod.Value :: HNil - example4 : will match path "/example4" and will match if header
Content-Type
is present supplying that header to map. - example5 : will match path "/example5?count=1&query=sql_query" supplying 1 :: "sql:query" :: HNil to map
- example6 : will match path "/example6" and then evaluating
someEffect
where the result of someEffect will be passed to map
http://http4s.org/
Comparing toHttp4s.org is a very nice library for http, originaly started with scalaz-stream and currently migrating to fs2. The main difference between http4s.org and fs2-http is that unlike http4s.org, fs2-http has a minimal amount of dependencies and is using fs2 for its networking stack (tcp, ssl) as well. Unlike http4s.org you don't need a special build for scalaz and cats, as fs2-http does not dependes on any of them.