tsc

C header library for access the CPU timestamp cycle counter (TSC) on x86-64. If not familar with using the TSC for benchmarking, refer to the Intel whitepaper. This is designed to be used for benchmarking code, so takes steps to prevent instruction reordering across measurement boundaries by the CPU.

Usage

As a header only library, just include tsc.h in your include directory of your project. Then, use as follows:

uint64_t start, end, overhead;

overhead = measure_tsc_overhead();

start = bench_start();
// code to benchmark
end = bench_end();

printf("Execution took %" PRIu64 " clock cycles\n", end - start - overhead);

Reading the TSC

Reading the TSC for benchmarking is a confused subject with differing advice on how to avoid CPU instruction reordering affecting your measurements. A detailed write up on the issues can be found at the gotsc project.

Converting Cycles to Time

To convert from cycles to wall-clock time we need to know TSC frequency. Frequency scaling on modern Intel chips doesn't affect the TSC.

Sadly, the only way to determine the TSC frequency appears to be through a MSR using the rdmsr instruction. This instruction is privileged and can't be executed from user-space.

If we could, we want to access the MSR_PLATFORM_INFO:

Register Name: MSR_PLATFORM_INFO [15:8] Description: Package Maximum Non-Turbo Ratio (R/O) The is the ratio of the frequency that invariant TSC runs at. Frequency = ratio * 100 MHz.

The multiplicative factor of 100 MHz varies across architectures. Luckily, it appears to be 100 MHz on all Intel architectures except Nehalem, for which it is 133.3 MHz.

If this method fails or is unavailable, Linux appears to determine the TSC clock speed through a [calibration] lxr3 against hardware timers.

For now, we don't provide the ability to convert cycles to time.

Intel TSC Documentation

Using CPUID

CPUID.01H : ECX.SSE[bit 25] = 1 Issue: CPUID with value 01H in register EAX Output: Value in ECX, check bit 25 is 1 indicating SSE support

For example:

static inline bool check_rdtscp(void)
{
  unsigned cpu;
  asm("mov $80000001H, %%rax\n\t"
      "cpuid\n\t"
      : "=d"(cpu)
      :: "%rax", "%rdx"
      );
  return ( cpu & (1<<27) );
}

TSC Flag:

CPUID.1:EDX.TSC[bit 4] = 1.

Invariant TSC:

The time stamp counter in newer processors may support an enhancement, referred to as invariant TSC. Processor’s support for invariant TSC is indicated by CPUID.80000007H:EDX[8]. The invariant TSC will run at a constant rate in all ACPI P-, C-. and T-states. This is the architectural behavior moving forward. On processors with invariant TSC support, the OS may use the TSC for wall clock timer services (instead of ACPI or HPET timers). TSC reads are much more efficient and do not incur the overhead associated with a ring transition or access to a platform resource.

IA32_TSC_AUX Register and RDTSCP Support:

Processors based on Intel microarchitecture code name Nehalem provide an auxiliary TSC register, IA32_TSC_AUX that is designed to be used in conjunction with IA32_TSC. IA32_TSC_AUX provides a 32-bit field that is initialized by privileged software with a signature value (for example, a logical processor ID). The primary usage of IA32_TSC_AUX in conjunction with IA32_TSC is to allow software to read the 64-bit time stamp in IA32_TSC and signature value in IA32_TSC_AUX with the instruction RDTSCP in an atomic operation. RDTSCP returns the 64-bit time stamp in EDX:EAX and the 32-bit TSC_AUX signature value in ECX. The atomicity of RDTSCP ensures that no context switch can occur between the reads of the TSC and TSC_AUX values. Support for RDTSCP is indicated by CPUID.80000001H:EDX[27]. As with RDTSC instruction, non-ring 0 access is controlled by CR4.TSD (Time Stamp Disable flag). User mode software can use RDTSCP to detect if CPU migration has occurred between successive reads of the TSC. It can also be used to adjust for per-CPU differences in TSC values in a NUMA system.

Invariant Time Keeping:

The invariant TSC is based on the invariant timekeeping hardware (called Always Running Timer or ART), that runs at the core crystal clock frequency. The ratio defined by CPUID leaf 15H expresses the frequency relationship between the ART hardware and TSC. If CPUID.15H:EBX[31:0] != 0 and CPUID.80000007H:EDX[InvariantTSC] = 1, the following linearity relationship holds between TSC and the ART hardware: TSC_Value = (ART_Value * CPUID.15H:EBX[31:0] )/ CPUID.15H:EAX[31:0] + K Where 'K' is an offset that can be adjusted by a privileged agent2. When ART hardware is reset, both invariant TSC and K are also reset.

Licensing

This library is BSD-licensed.

Get involved!

We are happy to receive bug reports, fixes, documentation enhancements, and other improvements.

Please report bugs via the github issue tracker.

Master git repository:

git clone git://github.com/dterei/tsc.git

Authors

This library is written and maintained by David Terei, code@davidterei.com.

foool/tsc