MultiBoot
Independent programmer for Atmega microcontrollers with firmware reading from SD card
Save your .hex files on SDcard, select one in menu with the buttons Up and Down, then press Ok to program the controller.
Supported controllers for program: Atmega 328p
For reboot programmer send reboot
from controller.
For load another file send load:filename.hex
Programmer <-> Controller
D3 --------- SCK
D5 --------- Reset
D6 --------- MISO
D7 --------- MOSI
Programmer <-> SD
D4 ------- CS
D11 ------- MOSI
D12 ------- MISO
D13 ------- SCK
Programmer <- Buttons
A0 -------- Up
A1 -------- Down
A2 -------- Ok
D8 -------- Cancel
Projects: Simple OLED game console: https://easyeda.com/Forem/multi