foxBMS/foxbms-1

Issues

• foxBMS PCBA

  #14 opened 4 months ago by richard198203
  1

• BMS enters config_assert while loop sometimes on Startup or while communicating through serial

  #13 opened 4 months ago by Goku5036
  1

• Message: CAN0_MSG_SOP Feature Support

  #6 opened 4 months ago by bmaxon
  1

• CAN protocol compatibility with other BMS units?

  #3 opened 4 months ago by davidbuzz
  12

• could not resolved

  #9 opened 3 years ago by Pppllll
  8

• CAN AutoRetransmission setting logic is inverted

  #11 opened 3 years ago by julian-poidevin
  7

• Errors when BUILD_MODULE_ENABLE_CONTACTOR set to 0

  #5 opened 3 years ago by AVanDeBrook
  1

• PEC for Open Wire commands are incorrect

  #10 opened 4 years ago by gudnimg
  2

• Build issue

  #8 opened 4 years ago by mvenkat27
  1

• Reading from ADC is not working

  #7 opened 4 years ago by Sgw32
  1

• error in configuring foxbms at "4.1.2.7. Testing the Project Setup"

  #4 opened 4 years ago by rud90
  1

• python tools/waf --help

  #2 opened 5 years ago by SourceLink
  3