A tool for securing communications between a client and a DNS resolver.
dnscrypt-proxy provides local service which can be used directly as your local resolver or as a DNS forwarder, encrypting and authenticating requests using the DNSCrypt protocol and passing them to an upstream server, by default OpenDNS who run this on their resolvers.
The DNSCrypt protocol uses high-speed high-security elliptic-curve cryptography and is very similar to DNSCurve, but focuses on securing communications between a client and its first-level resolver.
While not providing end-to-end security, it protects the local network, which is often the weakest point of the chain, against man-in-the-middle attacks. It also provides some confidentiality to DNS queries.
The daemon is known to work on recent versions of OSX, OpenBSD, Bitrig, NetBSD, Dragonfly BSD, FreeBSD, Linux, iOS (requires a jailbroken device), Android (requires a rooted device), Solaris (SmartOS) and Windows (requires MingW).
Download the latest version and extract it:
$ bunzip2 -cd dnscrypt-proxy-*.tar.bz2 | tar xvf -
$ cd dnscrypt-proxy-*
Compile and install it using the standard procedure:
$ ./configure && make -j2
# make install
Replace -j2 with whatever number of CPU cores you want to use for the
compilation process.
Running make -j2 check in the src/libsodium directory is also highly
recommended.
The proxy will be installed as /usr/local/sbin/dnscrypt-proxy by default.
Command-line switches are documented in the dnscrypt-proxy(8) man page.
Note: gcc 3.4.6 (and probably other similar versions) is known to produce broken code on Mips targets with the -Os optimization level. Use a different level (-O and -O2 are fine) or upgrade the compiler. Thanks to Adrian Kotelba for reporting this.
If you need a simple graphical user interface in order to start/stop the proxy and change your DNS settings, check out the following projects:
-
DNSCrypt OSX Client: A tool to easily use DNSCrypt with OpenDNS, configure plugins and define resolvers for specific domains. It has been implemented as a collection of shell scripts with a user interface in Objective C.
-
DNSCrypt WinClient: Easily enable/disable DNSCrypt on multiple adapters. Supports different ports and protocols, IPv6, parental controls and the proxy can act as a gateway service. Windows only, written in .NET.
-
DNSCrypt Win Client: Official GUI for Windows, by OpenDNS. Also known as "OpenDNSCrypt".
-
dnscrypt-proxy is also available on Cydia, and it can be easily enabled using GuizmoDNS.
DNSCrypt-Wrapper is a server-side dnscrypt proxy that works with any name resolver.
Having a dedicated system user, with no privileges and with an empty home directory, is highly recommended. For extra security, DNSCrypt will chroot() to this user's home directory and drop root privileges for this user's uid as soon as possible.
The easiest way to start the daemon is:
# dnscrypt-proxy --daemonize
The proxy will accept incoming requests on 127.0.0.1, tag them with an authentication code, forward them to OpenDNS resolvers, and validate each answer before passing it to the client.
Given such a setup, in order to actually start using DNSCrypt, you
need to update your /etc/resolv.conf file and replace your current
set of resolvers with:
nameserver 127.0.0.1
Other common command-line switches include:
--daemonizein order to run the server as a background process.--local-address=<ip>[:port]in order to locally bind a different IP address than 127.0.0.1--logfile=<file>in order to write log data to a dedicated file. By default, logs are sent to stdout if the server is running in foreground, and to syslog if it is running in background.--loglevel=<level>if you need less verbosity in log files.--max-active-requests=<count>to set the maximum number of active requests. The default value is 250.--pid-file=<file>in order to store the PID number to a file.--user=<user name>in order to chroot()/drop privileges.
DNSCrypt comes pre-configured for OpenDNS, although the
--resolver-address=<ip>[:port],
--provider-name=<certificate provider FQDN>
and --provider-key=<provider public key> can be specified in
order to change the default settings.
The proxy can be installed as a Windows service.
Copy the dnscrypt-proxy.exe file to any location, then open a
terminal and type (eventually with the full path to dnscrypt-proxy.exe):
dnscrypt-proxy.exe --install
It will install a new service named dnscrypt-proxy.
After being stopped, the service can be removed with:
dnscrypt-proxy.exe --uninstall
The DNSCrypt proxy is not a DNS cache. This means that incoming queries will not be cached and every single query will require a round-trip to the upstream resolver.
For optimal performance, the recommended way of running DNSCrypt is to
run it as a forwarder for a local DNS cache, like unbound or
powerdns-recursor.
Both can safely run on the same machine as long as they are listening to different IP addresses (preferred) or different ports.
If your DNS cache is unbound, all you need is to edit the
unbound.conf file and add the following lines at the end of the server
section:
do-not-query-localhost: no
forward-zone:
name: "."
forward-addr: 127.0.0.1@40
The first line is not required if you are using different IP addresses instead of different ports.
Then start dnscrypt-proxy, telling it to use a specific port (40, in
this example):
# dnscrypt-proxy --local-address=127.0.0.1:40 --daemonize
IPv6 is fully supported. IPv6 addresses with a port number should be specified as [ip]:port
# dnscrypt-proxy --local-address='[::1]:40' --daemonize
Some routers and firewalls can block outgoing DNS queries or transparently redirect them to their own resolver. This especially happens on public Wifi hotspots, such as coffee shops.
As a workaround, the port number can be changed using
the --resolver-port=<port> option. For example, OpenDNS servers
reply to queries sent to ports 53, 443 and 5353.
By default, dnscrypt-proxy sends outgoing queries to UDP port 443.
In addition, the DNSCrypt proxy can force outgoing queries to be sent over TCP. For example, TCP port 443, which is commonly used for communication over HTTPS, may not be filtered.
The --tcp-only command-line switch forces this behavior. When
an incoming query is received, the daemon immediately replies with a
"response truncated" message, forcing the client to retry over TCP.
The daemon then authenticates the query and forwards it over TCP
to the resolver.
--tcp-only is slower than UDP because multiple queries over a single
TCP connections aren't supported yet, and this workaround should
never be used except when bypassing a filter is actually required.
DNS packets sent over UDP have been historically limited to 512 bytes, which is usually fine for queries, but sometimes a bit short for replies.
Most modern authoritative servers, resolvers and stub resolvers support the Extension Mechanism for DNS (EDNS) that, among other things, allows a client to specify how large a reply over UDP can be.
Unfortunately, this feature is disabled by default on a lot of
operating systems. It has to be explicitly enabled, for example by
adding options edns0 to the /etc/resolv.conf file on most
Unix-like operating systems.
dnscrypt-proxy can transparently rewrite outgoing packets before
authenticating them, in order to add the EDNS0 mechanism. By
default, a conservative payload size of 1252 bytes is advertised.
This size can be made larger by starting the proxy with the
--edns-payload-size=<bytes> command-line switch. Values up to 4096
are usually safe.
A value below or equal to 512 will disable this mechanism, unless a client sends a packet with an OPT section providing a payload size.
The DNSCrypt proxy ships with a simple tool named hostip that
resolves a name to IPv4 or IPv6 addresses.
This tool can be useful for starting some services before
dnscrypt-proxy.
Queries made by hostip are not authenticated.