/GalaxySlicer

G-code generator for 3D printers (Bambu, Creality, Prusa, Qidi, Snapmaker, etc.)

Primary LanguageC++GNU Affero General Public License v3.0AGPL-3.0

GalaxySlicer_github_banner DE Readme FR Readme NL Readme

GitHub license GitHub release (with filter) GitHub release downloads (latest) Build Win x64 Build macOS x64 Build macOS arm64

GalaxySlicer is an extended version of the Orca Slicer.

GalaxySlicer is based on Orca Slicer by SoftFever, which is based on Bambu Studio by BambuLab. Bambu Studio is based on PrusaSlicer by Prusa Research, which emerged from Slic3r by Alessandro Ranellucci and the RepRap community. Orca Slicer incorporates a lot of features from Super Slicer by supermerill

Main features

  • Profile Manager (Coming soon)
  • Marlin2 support
  • Klipper support

Supported printers

The following printers are currently supported by GalaxySlicer: Printer list

Pre-compiled releases

Currently, only Windows, macOS x64 & arm64 releases are precompiled.

All compile releases can be found at the following link: Releases

  • Mac 64-bit
    • Tools needed: Xcode, Cmake, git, gettext, libtool, automake, autoconf, texinfo
      • You can install most of them by running brew install cmake gettext libtool automake autoconf texinfo
    • run build_release_macos.sh

Supported operating systems

  • Ubuntu
    • Dependencies Will be auto installed with the shell script: libmspack-dev libgstreamerd-3-dev libsecret-1-dev libwebkit2gtk-4.0-dev libosmesa6-dev libssl-dev libcurl4-openssl-dev eglexternalplatform-dev libudev-dev libdbus-1-dev extra-cmake-modules libgtk2.0-dev libglew-dev libudev-dev libdbus-1-dev cmake git texinfo
    • run 'sudo ./BuildLinux.sh -u'
    • run './BuildLinux.sh -dsir'

GalaxySlicer has been tested under the following operating systems so that full functionality can be guaranteed. For all operating systems that were not listed on no complete functionality can be guaranteed

macOS 12: x64 macOS 12: arm64 macOS 13: x64 macOS 13: arm64 macOS 14: x64 macOS 14: arm64 Windows 10: x64 Windows 11: x64

Linux distubitions are not supported by us at the moment.

How to Wiki articles

In the GalaxySlicer wiki, How to contributions are maintained, these articles show the required steps.

The following How to articles can be found in the Wiki:

License

GalaxySlicer is licensed under the GNU Affero General Public License, version 3. GalaxySlicer is based on Orca Slicer by SoftFever.

Orca Slicer is licensed under the GNU Affero General Public License, version 3. Orca Slicer is based on Bambu Studio by BambuLab.

Bambu Studio is licensed under the GNU Affero General Public License, version 3. Bambu Studio is based on PrusaSlicer by PrusaResearch.

PrusaSlicer is licensed under the GNU Affero General Public License, version 3. PrusaSlicer is owned by Prusa Research. PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci.

Slic3r is licensed under the GNU Affero General Public License, version 3. Slic3r was created by Alessandro Ranellucci with the help of many other contributors.

The GNU Affero General Public License, version 3 ensures that if you use any part of this software in any way (even behind a web server), your software must be released under the same license.

The bambu networking plugin is based on non-free libraries. It is optional to the Orca Slicer and provides extended functionalities for users.