frainzy1477/clash
Clash for openwrt [Luci-app-clash] https://github.com/frainzy1477/luci-app-clash
MakefileMIT
Issues
- 1
clash会修改DNS问题
#66 opened by ty28606428 - 1
启用时发生的问题请教
#65 opened by P-DX - 1
订阅配置无密匙,CLash无法设置密匙为空导致不能匹配
#64 opened by jh3274 - 3
请问斐讯N1要使用哪个版本的ipk
#63 opened by cooladam201212 - 3
在编译进lean-openwrt的时候报错
#62 opened by li-xunhuan - 15
一段时间出现dial Proxy error: server ip:prot connect error: dial tcp4 server ip:port: i/o timeout
#61 opened by denel23 - 1
- 1
1.6版本好像不稳定,经常显示“无法访问”和“正常”来回切换!!!
#58 opened by zxlhhyccc - 6
- 2
Gateway timeout
#57 opened by ichswarox - 5
dns设置有问题
#56 opened by Cakewalk598 - 10
最新版clash以及最新版界面文件问题反馈
#54 opened by Cakewalk598 - 2
新版clash在lean源码编译后无法运行启动
#53 opened by Cakewalk598 - 1
Where is the source code?
#52 opened by a13519 - 2
关于“走代理的局域网IP”功能问题
#51 opened by shikkoku - 1
安装Luci for Clash ipk之后dhcp无法正常工作
#50 opened by whoshoe - 1
- 6
能否编译mips1400kc
#48 opened by NoColor2 - 3
- 1
新版问题反馈
#46 opened by Cakewalk598 - 1
v0.15.1-dev的tar源码链接是多少?
#45 opened by Cakewalk598 - 6
Cloud you please build mipsle 74kc ipk?
#44 opened by tianxiangkid - 3
luci 配置文件上传问题及无法启动
#20 opened by GhostFlying - 1
是否考虑切换到clash dev分支?
#43 opened by gitx6 - 2
- 5
Cannot install package clash.
#41 opened by fbigun - 3
When clash and luci-app-clash are running, the System > Startup page will not load. OpenWrt 18.06.02
#39 opened by jitdor - 1
对yml/yaml内容顺序是否有要求?
#40 opened by NV3S - 3
- 2
- 2
clash的日志能不能和syslog日志混一起出现呢?
#37 opened by zcracker - 2
- 0
- 6
- 0
关于日志echo "" > /tmp/clash.log
#32 opened by zcracker - 1
clash运行后,内网服务器无法访问
#33 opened by zcracker - 3
- 2
墙洞托管URL无法获取yml
#30 opened by hackenfu - 1
clash-0.19.0的源码版本号如下并未变更
#29 opened by zcracker - 0
- 1
luci对config.yml中的注释行(#)的处理
#27 opened by gitx6 - 6
国外网IP在clash启动后,保持国内ip
#26 opened by gitx6 - 2
clash与dnsmasq的关系?
#25 opened by zcracker - 4
访问luci页面时系统日志出现大量错误
#24 opened by shikkoku - 1
0.16.0-2 配置文件丢失
#22 opened by gitx6 - 12
luci v0.15.0 clash 控制面板无法打开
#21 opened by gitx6 - 4
建议添加日志自动/手动清理功能
#19 opened by laoz77 - 0
clash启动后的节点选择
#17 opened by gitx6 - 2
如何让路由器自身流量翻墙?
#16 opened by gitx6 - 1