Master status:
Really tiny library to basic RTC functionality on Arduino, ESP8266, STM32, ESP32 and other microcontrollers.
DS1307, DS3231 and DS3232 RTCs are supported (and compatibles)
Supported features:
- SQuare Wave Generator
- Fixed output pin for DS1307
- RAM for DS1307 and DS3232
- temperature sensor for DS3231 and DS3232
- Alarms (1 and 2) for DS3231 and DS3232
- Power lost flag reading and clearing
EEPROM support has been moved to https://github.com/Naguissa/uEEPROMLib
You can get it from Arduino libraries directly, searching by uRTCLib.
For manual installation:
- Get the ZIP.
- Rename to uRTCLib.zip
- Install library on Arduino
You can find all documentation and extras in this repository: https://github.com/Naguissa/uRTCLib_doc_and_extras
You can read documentation online here: https://naguissa.github.io/uRTCLib_doc_and_extras/
Included on example folder, available on Arduino IDE.
- Check .h file to see all constants and per-model limitations
- Alarm pin is normaly HIGH and turns LOW when active.
- When using alarms, you need to clear the alarm flag manually using alarmClearFlag(). If not done alarm maintains its LOW state.
- When using alarms SQWG is turned off. When using SQWG alarms are turned off. They're mutually excluding.
- Naguissa
- https://www.foroelectro.net/librerias-arduino-ide-f29/rtclib-arduino-libreria-simple-y-eficaz-para-rtc-y-t95.html
- https://www.naguissa.com
Any code contribution, report or comment are always welcome. Don't hesitate to use GitHub for that.
- You can sponsor this project using GitHub's Sponsor button: https://github.com/Naguissa/uRTCLib
- You can make a donation via PayPal: https://paypal.me/foroelectro
Thanks for your support.
Contributors hall of fame: https://www.foroelectro.net/hall-of-fame-f32/contributors-contribuyentes-t271.html