/persistence-of-vision

Persistence of vision from scratch on an arduino nano

Primary LanguageC

Persistence of vision

This project implements persistence of vision from scratch on an arduino nano (without the arduino framework). The effect can be seen when taking a long exposure photo, and moving either the camera or the device linearly.

Building

make
make flash

Note: This assumes you have the arduino bootloader installed on the nano. If not, you'll need to flash the built hex file using the ISP

Notes

If you're building this yourself, you may need to tweak the baudrate setting in the makefile. I used a knock-off nano, which is markedly slower and pickier than the official ones.