RKE2 Cluster with vSphere CPI/CSI & kube-vip

Reason for Being

This Terraform plan is for creating a multi-node CIS Benchmarked RKE2 cluster with vSphere CPI/CSI & kube-vip installed and configured. RKE2's NGiNX Ingress Controller is also exposed as a LoadBalancer service to work in concert with kube-vip. Along with those quality-of-life additions, this cluster plan takes the standard RKE2 security posture a couple of steps further by way of installing with CIS 1.23 Profile enabled, using Calico's Wireguard backend for encrypting pod-to-pod communication, & enforcing the use TLS 1.3 across Control Plane components.

There is a lot of HereDoc in the rke_config section of cluster.tf so that it's easier to see what's going on - you'll probably want to put this info in a template file to keep the plan a bit neater than what's seen here.

Some operating systems will run containerd within the "systemd" control group and the Kubelet within the "cgroupfs" control group - this plan passes to the Kubelet a --cgroup-driver=systemd argument to ensure that there will be only a single cgroup manager running - better aligining the cluster with upstream K8s reccomendations ( see: https://kubernetes.io/docs/setup/production-environment/container-runtimes/#cgroup-drivers).

Static IP Addressing

Static IPs can be implemented if needed. Firstly, a Network Protocol Profile needs to be created in vSphere. After the profile is created, two parts of this Terraform plan need to be changed: cloud-init and the rancher2_machine_config_v2 resource in cluster.tf.

A script must be added with write_files and executed via runcmd in cloud-init. This script gathers instance metadata, via vmtools, and then applies it (the below example uses Netplan. Your OS, however, may use something different):

- content: |
  #!/bin/bash
  vmtoolsd --cmd 'info-get guestinfo.ovfEnv' > /tmp/ovfenv
  IPAddress=$(sed -n 's/.*Property oe:key="guestinfo.interface.0.ip.0.address" oe:value="\([^"]*\).*/\1/p' /tmp/ovfenv)
  SubnetMask=$(sed -n 's/.*Property oe:key="guestinfo.interface.0.ip.0.netmask" oe:value="\([^"]*\).*/\1/p' /tmp/ovfenv)
  Gateway=$(sed -n 's/.*Property oe:key="guestinfo.interface.0.route.0.gateway" oe:value="\([^"]*\).*/\1/p' /tmp/ovfenv)
  DNS=$(sed -n 's/.*Property oe:key="guestinfo.dns.servers" oe:value="\([^"]*\).*/\1/p' /tmp/ovfenv)

  cat > /etc/netplan/01-netcfg.yaml <<EOF
  network:
    version: 2
    renderer: networkd
    ethernets:
      ens192:
        addresses: 
          - $IPAddress/24
        gateway4: $Gateway
        nameservers:
          addresses : [$DNS]
  EOF

  netplan apply

path: /root/netplan.sh

The below additions need to be made to rancher2_machine_config_v2. This example would apply static IPv4 addresses to only the ctl_plane node pool:

vapp_ip_allocation_policy = each.key == "ctl_plane" ? "fixedAllocated" : null
vapp_ip_protocol          = each.key == "ctl_plane" ? "IPv4" : null
vapp_property = each.key == "ctl_plane" ? [
  "guestinfo.interface.0.ip.0.address=ip:<vSwitch_from_Network_Protocol_Profile>",
  "guestinfo.interface.0.ip.0.netmask=$${netmask:<vSwitch_from_Network_Protocol_Profile>}",
  "guestinfo.interface.0.route.0.gateway=$${gateway:<vSwitch_from_Network_Protocol_Profile>}",
  "guestinfo.dns.servers=$${dns:<vSwitch_from_Network_Protocol_Profile>}",
] : null
vapp_transport = each.key == "ctl_plane" ? "com.vmware.guestInfo" : null

Using static IPs comes with some small caveats:

In leu of "traditional" cloud-init logic to handle OS updates/upgrades & package installs:

package_reboot_if_required: true
package_update: true
package_upgrade: true
packages:
  - <insert_awesome_package_name_here>

Scripting would need to be introduced to take care of this later on in the cloud-init process, if desired (i.e. a write_file using defer: true). Since runcmd happens later in the cloud-init process, the node would not have an IP available to successfully complete any package* logic requiring network access.

Environment Prerequisites

Functional Rancher Management Server with vSphere Cloud Credential
vCenter >= 7.x and credentials with appropriate permissions (see vSphere Permissions section)
Virtual Machine Hardware Compatibility at Version >= 15

Create the following in the files/ directory:

NAME	PURPOSE
.rancher-api-url	URL for Rancher Management Server
.rancher-bearer-token	API bearer token generated via Rancher UI
.ssh-public-key	SSH public key for additional OS user
.vsphere-passwd	Password associated with vSphere CPI/CSI credential

vSphere Permissions

For required vSphere CPI & CSI account permissions see HERE.

Caveats

vSphere CSI volumes are RWO only unless using vSAN Datastore
Using Wireguard as CNI backend comes at a performance penalty (see https://projectcalico.docs.tigera.io/security/encrypt-cluster-pod-traffic)
kube-vip is configured in L2 mode, so ALL LoadBalancer service traffic goes only to the node that has the VIP assigned, which is not suitable for production

To Run

terraform apply

Tested Versions

SOFTWARE	VERSION	DOCS
kube-vip	0.6.2	https://kube-vip.io/docs/
Rancher Server	2.7.6	https://ranchermanager.docs.rancher.com/
Rancher Terraform Provider	3.1.1	https://registry.terraform.io/providers/rancher/rancher2/latest/docs
RKE2	1.26.8+rke2r1	https://docs.rke2.io
Terraform	1.4.6	https://www.terraform.io/docs
vSphere	8.0.1.00300	https://docs.vmware.com/en/VMware-vSphere/index.html

frank-at-suse/vsphere_rancher_cluster