frank-zago/ch341-i2c-spi-gpio

Issues

• Driver doesn't support 0-length transfers to control CS line

  #36 opened 7 months ago by jp-bennett
  2

• Thank you for your work

  #8 opened 2 years ago by zhang-wenchao
  4

• open i2c device using ioctl is not supported

  #40 opened 6 months ago by axet
  1

• spi-ch341.c : error with kernel 6.8.0

  #37 opened 7 months ago by Tian-HP
  2

• Fix page-fault in kernel 5.15

  #33 opened 8 months ago by iotmaker33
  3

• BUG: unable to handle page fault for address: ffffffffc300b1e8

  #25 opened 8 months ago by sacarlson
  1

• oops on unload during irq monitoring.

  #31 opened 8 months ago by mjsir911
  1

• IRQ?

  #30 opened 8 months ago by mjsir911
  2

• gpiochipN number going up indefinitely.

  #29 opened 8 months ago by mjsir911
  1

• udev for SPI

  #26 opened 10 months ago by jp-bennett
  2

• #INI output signal question

  #5 opened 2 years ago by Sfinx
  21

• adapter quirk: msg too long

  #18 opened a year ago by maraya
  2

• could not insert module ch341-core.ko: Invalid module format

  #19 opened a year ago by botoxparty
  1

• Update the driver to the MFD branch

  #14 opened 2 years ago by frank-zago
  0

• Fix i2c handling

  #13 opened 2 years ago by frank-zago
  0

• SPI pins flicker when SPI device is registered

  #15 opened 2 years ago by LouisLambda
  0

• support xfer->cs_change in multi-part SPI messages

  #9 opened 2 years ago by LouisLambda
  1

• driver ignores SPI bus lock

  #12 opened 2 years ago by LouisLambda
  2

• Fix README

  #10 opened 2 years ago by LouisLambda
  1

• BUG: ch341_spi_transfer_one_message calls spi_transfer with bad nsegs value

  #11 opened 2 years ago by LouisLambda
  0

• no i2c and spi devices.

  #2 opened 2 years ago by Vicsar73
  7

• [q] what is max SPI transfer size ?

  #6 opened 2 years ago by Sfinx
  4

• 6.2.x kernel port

  #3 opened 2 years ago by Sfinx
  1

• extracting ch341 device from USB while running gpiomon leads to kernel oops

  #4 opened 2 years ago by Sfinx
  1

• Setup question

  #1 opened 2 years ago by ErikLambrechts
  2