Open source control for Belkin WeMo devices
- Free software: BSD license
- Documentation: Soon at http://aioouimeaux.rtfd.org.
- Supports WeMo Switch, Light Switch, Insight Switch and Motion
- Python API to interact with device at a low level using asyncio
Based on a repository that can be found here: https://github.com/syphoxy/ouimeaux.git The original repository can be found here: https://github.com/iancmcc/ouimeaux
The library was modified to make use of asyncio.
It has been forked here since it is a significant change. It has been renamed to clearly indicate the difference.
$ sudo pip3 install aioouimeaux
If you want to use a virtual environement
$ sudo pip3 install virtualenv
$ mkdir ouimeaux-env
$ virtualenv ouimeaux-env
$ source ouimeaux-env/bin/activate
$ cd ouimeaux-env
$ pip3 install git+https://github.com/frawau/ouimeaux.git
At this point you should be able to use
Note: Ensure that the pip and virtualenv command you use belongs to a
Python 3 installation. On some systems, there are multiple versions of Python
installed.
You can try:
python3 -m aioouimeaux
and see something like:
Hit "Enter" to start
Use Ctrl-C to quit
Motion Motion status is now Off
Switch Test Switch 3 status is now Off
Switch Test Switch 1 status is now On
Switch Test Switch 2 status is now On
Motion Motion status is now Off
Select Device:
[1] Motion
[2] Test Switch 1
[3] Test Switch 2
[4] Test Switch 3
Your choice:2
Select Function for Test Switch 1:
[1] Power (0 or 1)
[2] Get Home Id
[3] Get MAC Address
[4] Get Device Id
[5] Get Serial Number
[6] Explain
[7] Function X (e.g. basicevent.GetHomeInfo see 'explain')
[0] Back to device selection
Open an issue and I'll try to help.