freakent/dbus-mqtt-devices

Issues

• Problems after Update to VebusOS V3.50-3.51

  #137 opened a month ago by rholze
  6

• if off-line the setup-dependencies.sh prevents rc.local to complete ansd create symlink to /service/dbus-mqtt-devices

  #132 opened 2 months ago by kds69
  3

• Not working after updating Cerbo Firmware

  #133 opened 2 months ago by pluto202
  1

• Minor issue: PV Inverter doesn't show power, nor phases

  #131 opened 2 months ago by kds69
  5

• Error during installation

  #126 opened 5 months ago by schwalbe13
  2

• With Venus OS 3.41 setup didn't work

  #125 opened 5 months ago by FrodoVDR
  2

• No module named 'yaml'

  #123 opened 5 months ago by ajvdw
  1

• installation fails

  #122 opened 7 months ago by skrebber
  2

• Error while installing

  #120 opened 7 months ago by devilmastah
  6

• Temperature value as string

  #119 opened 8 months ago by mhcore-m
  3

• Root partion is now mounted readonly by default in VenusOS 3.30-*

  #108 opened 8 months ago by freakent
  1

• Add support for EVCharger

  #110 opened 8 months ago by freakent
  12

• Settings are not always persisting as they should

  #111 opened 8 months ago by freakent
  1

• Add Status attribute for Temperature dbus path

  #87 opened 10 months ago by freakent
  5

• Add AC Load energy meter

  #66 opened 10 months ago by Woodpeckercz
  3

• Solax PV no longer shows up in the device list.

  #102 opened 10 months ago by UdoD5
  1

• Victron Bus System Connection get lost when using dbus-mqtt-devices

  #101 opened 10 months ago by PanicMan
  1

• PVinverter is shown as "Fronius" in VRM

  #70 opened 10 months ago by americanium
  4

• setup.sh shoiuld check if there are existing entries in /data/rc.local

  #90 opened 10 months ago by freakent
  2

• Setup module dependecies on every reboot from /data/rc.local

  #98 opened 10 months ago by freakent
  1

• Setup module dependecies on every reboot from /data/rc.local

  #96 opened 10 months ago by freakent
  2

• Update readme to explain you need to run setup.sh after a VenusOS

  #93 opened 10 months ago by freakent
  0

• Energy Ac/L1/Energy/Reverse not working as expected

  #91 opened 10 months ago by patatman
  1

• Problem sending values over MQTT from nodered [not original title]

  #88 opened 10 months ago by dersch81
  12

• Ensure deviceId is passed to dbus as a int and not a string

  #83 opened 10 months ago by freakent
  0

• Resolve dataclasses dependency with python3-misc module

  #84 opened 10 months ago by freakent
  0

• Battery support

  #68 opened a year ago by odaigle
  5

• Q: will it future work with dbus-flashmq?

  #55 opened a year ago by mdkeil
  23

• New GUI-Beta requires Status DBus path for Temp sensors

  #74 opened a year ago by gharshaw
  6

• Exception error during installation

  #75 opened a year ago by aquaaddict
  1

• New Release: 0.7.5-beta

  #62 opened a year ago by freakent
  36

• Inverter is not showing Values in VRM

  #76 opened a year ago by KallerTobias
  10

• AC loads to position 0 instead of 1 in Venus OS GUI

  #73 opened a year ago by jeroenkl
  1

• Position move in Venus OS GUI

  #72 opened a year ago by jeroenkl
  1

• setup.sh: ModuleNotFoundError: No module named 'dataclasses'

  #69 opened a year ago by Boss8472
  2

• Different service weather forecast

  #67 opened a year ago by DJZorro
  3

• Nodered Virtual sensor

  #65 opened a year ago by Woodpeckercz
  7

• strings everywhere

  #63 opened a year ago by foxos42
  2

• null not "0"

  #64 opened a year ago by foxos42
  2

• Venus Os Crash after add a PV Inverter

  #60 opened a year ago by Jacke87
  6

• Installation error on RPi

  #57 opened a year ago by Becker884
  4

• Installation error on CerboGX

  #56 opened a year ago by mactoolz
  30

• Rpi Install Error

  #58 opened a year ago by gjonesy84
  3

• I did the installation work around but still doesn't work

  #61 opened a year ago by Zahnpasta83
  14

• Uninstall

  #59 opened a year ago by dansonamission
  2

• possible to add services like ac-charger and dc-system?

  #50 opened a year ago by kr0815
  5

• Victron Wallbox support

  #53 opened a year ago by Hofyyy
  1

• Detect device failure

  #54 opened a year ago by andre-meyer82
  3

• How to remove an old sensor from VRM Portal (online)?

  #52 opened 2 years ago by Ennar1991
  4

• Display total solar is missing - Adding SMA Inverter

  #51 opened 2 years ago by phoenix-83
  4